聚能射流的断裂时间

从描述聚能射流失稳的一维近似方程出发，导出了聚能射流断裂时间的近似公式。这个近似公式定量显示了屈服应力、本构关系、粘度和径向收缩效应等对射流断裂时间的影响，在４个不同的特殊近似下，可以自然演化为近１０年来所发表的几个半经验解析公式，并且在合理的参数范围内，公式给出的断裂时间曲线覆盖了射流断裂时间的全部实验点。     

稳态双曲流场中液/液混合的粘性液滴哑铃分散模型

通过对稳态双曲流场中液／液混合体系分散相液滴所受分散作用力的分析，建立了粘性液滴的哑铃分散模型．趋于将两粘性液滴分开的分散作用力与粘度比、流场类型和强度、液滴半径、哑铃取向和尺寸有关．该模型解释了流场类型与分散作用的关系．流场类型对液滴的分散具有很大影响，在纯应变拉伸流场中分散作用力是简单剪切流场中的两倍，因而对于液滴的分散，拉伸流场较简单剪切流场更有效，这与以前的实验结论符合．当体系粘度比趋于无穷大时本模型转化为刚性哑铃分散模型     

Heat capacities of solid polymers

The heat capacity of a solid polymer is governed by the manner in which the internal energy is distributed over the various degrees of freedom. If the internal energy manifests itself in harmonic oscillatory motions, the heat capacity is the sum of contributions of the normal modes of motion. In practice, full frequency data are not generally available for polymers. This paper proposes an empirical method for determining the heat capacities of linear high polymers by the addition of contributions from different chain segments. A survey of heat capacity data for 30 linear high polymers and several copolymer systems has revealed that additivity is usually valid for a temperature range from about 60°K to the glass-transition temperature. A table of heat capacity contributions of a number of polymer constituents is derived which permits the calculation of unknown heat capacities to an accuracy of ±5% or better. In addition, δC_p data for the increase of the heat capacity at the glass-transition temperature were found to agree with the rule of constant heat capacity increase per mole of “bead” proposed 8 years ago.     

Study of the degradation of a new PLA braided biomaterial in buffer phosphate saline,basic and acid media,intended for the regeneration of tendons and ligaments

The purpose of this study was to evaluate the effects of hydrolytic degradation on the properties of a PLA hollow braid designed as a new concept of biodegradable prosthesis for the regeneration of tendons and ligaments. The main function of the braided material is to bear mechanical loads while it is being replaced by the newly-generated tissue. The kinetics of braided material degradation is thus an important factor in determining the success of the product. In order to study this mechanism, PLA braid was subjected to a 12-month degradation process at 37 °C in PBS at pH 7.4 (to simulate the human physiological medium) and to accelerated degradation for one month in pH 12 and pH 3 solutions. Degradation of the braid subjected to hydrolysis was evaluated by weight loss, molecular weight distribution, mechanical properties, and calorimetric and morphologic analyses. The weight loss in a basic medium reached 21%, versus no significant change in the other media. Average molecular weight was reduced by approximately 50% in the three media, with loss of mechanical properties in all cases. The morphological changes were more evident in the PLA degraded in the basic medium. The crystallinity of the material increased at the first stages of degradation, regardless of the medium used.     

运动状态下液体轴对称抛撒首次破碎的实验研究

在实验室条件下利用组合式激波管设备,对运动状态下液体轴对称抛撒进行了实验研究。通过纹影装置获得其所形成雾化场的外形轮廓照片,测量获得了液核发生首次破碎的位置与对称轴之间的距离。通过对抛撒过程中R-T不稳定性与K-H不稳定性的分析认为,轴向气流作用下液体轴对称抛撒的首次破碎点与对称轴的距离主要由轴向气流的速度、轴向气流的密度、液体轴对称抛撒的出口速度、抛撒液体的表面张力系数、环形喷口的宽度等参数所决定。在此基础上,利用相似性理论和无量纲分析,获得了运动状态下液体轴对称抛撒首次破碎点与对称轴之间的距离与相关参数的无量纲关系式。     

瞬变流中气泡动力过程研究

微气泡的生成等基础问题制约着鼓泡脱气技术的发展。本文基于对文丘里鼓泡器内流场的研究,对不同雷诺数下的气泡动力特性进行研究,采用大涡模拟和流体体积法相结合的数值模拟方法,对气泡在不同瞬时动态变化流场下的动力特性进行研究,通过分析气泡在不同湍流下的表面积,气泡球度,以及气泡表面所处的湍流应力,计算气泡所受的破坏应力与聚合应力之比,得到气泡的临界韦伯数随气泡在瞬变湍流中的变化过程,分析气泡破碎的临界条件。     

在轴向气流作用下液体轴对称抛撒二次破碎的实验研究

液体轴对称抛撒的实验研究是以云雾爆轰武器的研制为背景的。为了研究轴向气流作用下液体轴对称抛撒二次破碎所形成的雾化场特性,本文利用两台激波管并对之加以改造,成功地在实验室实现了轴向气流作用下液体的轴对称抛撒。为了研究其雾化场的远场特性,本文利用激光粒子测量仪获得了在不同实验工况和不同位置下的雾化场SMD分布曲线。实验数据表明,由于轴向气流速度的增加,液体破碎的Weber数得到了提高,导致二次破碎初期雾化场的SMD随之减小;随着抛撒驱动压力的提高,二次破碎初期雾化场的SMD也随之减小;在同一工况下,雾化场SMD随着测量位置与喷口距离的增加而变大。     

VOF法模拟剪切流动下液滴的变形和断裂运动

本文对剪切作用下悬浮液滴在另一种不相融的液体中的变形和断裂过程进行了数值模拟.采用VOF(Volume ofFluid)法中的三维PLIC(Piecewise Linear Interface Calculation)算法实现界面的重构和输运,交错网格下投影法离散表面张力为源项的不可压缩Navier-Stokes方程....     

Investigation of droplet size distribution for liquid-liquid emulsions in Taylor-Couette flows

In this paper, we investigate oil-in-water emulsions in a Taylor-Couette flow. A high-speed camera was employed to record the formation of those emulsions, and image processing was used to obtain the diameter of the droplets. No surfactants were added in order to study the pure effect of the fluid dynamical forces on the droplets. The results for three different oil-in-water emulsions show that the Sauter mean diameter considerably depends on the local shear rate and the material properties and that the droplet size distribution follows a log-normal distribution. We, therefore, propose to express the Sauter mean diameter normalized by Prandtl mixing length in terms of a correlation, which is based on the Kolmogorov turbulence theory. This correlation subsequently depends on the local shear rate and the material properties such as viscosity, density, and interfacial tension. The predictions of the correlation show fairly good agreement with the experimental measurement the Sauter mean diameter. Finally, comparing the predictions of the correlation to the data presented by Eskin et al. [Chem. Eng. Sci. 161 36–47; 2017] shows excellent agreement in the case, where the droplets are larger than the Kolmogorov length scale.