毛细管电色谱中进样时间对柱效的影响

毛细管电色谱是近年发展起来的一种新型微分离技术，它结合了高效液相色谱和毛细管电泳的物点，具有高效、快速，高选择性，其有关理论研究和应用越来越深入，本文从色谱动力学角度讨论了毛细管电色谱中进样时间对柱的影响。     

光泽精化学发光体系的研究与应用

对光泽精化学发光体系的动力学性质、荧光光谱、化学发光光谱及化学发光机理进行研究和探讨。详细研究了光泽精 - H2 O2 - Co( )流动注射化学发光体系的最佳分析条件。结果表明 ,当光泽精 (L c)为 2 .5×10 - 5mol/L、H2 O2 为 0 .5 mol/L、Na OH为 0 .4 mol/L、CTMAB为 2 .0× 10 - 5mol/L时 ,测定 Co( )的校准曲线线性范围为 0 .0 5— 2 0 0μg/m L ,检出限为 0 .0 1μg/m L。对 10μg/m L Co( )连续测定 7次 ,相对标准偏差为 1.7%。     

Optimal design of a convergent-barrel cold spray nozzle by numerical method

A convergent-barrel (CB) cold spray nozzle was designed through numerical simulation. It was found that the main factors influencing significantly particle velocity and temperature include the length and diameter of the barrel section, the nature of the accelerating gas and its pressure and temperature, and the particle size. Particles can achieve a relatively low velocity but a high temperature under the same gas pressure using a CB nozzle compared to a convergent-divergent (CD) nozzle. The experiment results with Cu powder using the designed CB nozzle confirmed that particle deposition can be realized under a lower gas pressure with a CB nozzle.     

SILEX-1装置上等离子体尾场加速电子初步实验

激光等离子体加速电子机制可以产生准单能的高能电子束, 近年来成为国际上的研究热点. 中国工程物理研究院激光装置已经能够达到286TW的输出功率, 为国内在该领域的研究提供了实验条件. 文章介绍了在SILEX-1装置上开展的激光等离子体加速电子的初步实验, 并对测得结果进行讨论, 为下一步实验的进行提供了准备条件.     

Extension of a combined analytical/numerical initial value problem solver for unsteady periodic flow

Here we describe analytical and numerical modifications that extend the Differential Reduced Ejector/ mixer Analysis (DREA), a combined analytical/numerical, multiple species ejector/mixing code developed for preliminary design applications, to apply to periodic unsteady flow. An unsteady periodic flow modelling capability opens a range of pertinent simulation problems including pulse detonation engines (PDE), internal combustion engine ICE applications, mixing enhancement and more fundamental fluid dynamic unsteadiness, e.g. fan instability/vortex shedding problems. Although mapping between steady and periodic forms for a scalar equation is a classical problem in applied mathematics, we will show that extension to systems of equations and, moreover, problems with complex initial conditions are more challenging. Additionally, the inherent large gradient initial condition singularities that are characteristic of mixing flows and that have greatly influenced the DREA code formulation, place considerable limitations on the use of numerical solution methods. Fortunately, using the combined analytical–numerical form of the DREA formulation, a successful formulation is developed and described. Comparison of this method with experimental measurements for jet flows with excitation shows reasonable agreement with the simulation. Other flow fields are presented to demonstrate the capabilities of the model. As such, we demonstrate that unsteady periodic effects can be included within the simple, efficient, coarse grid DREA implementation that has been the original intent of the DREA development effort, namely, to provide a viable tool where more complex and expensive models are inappropriate. Copyright © 2002 John Wiley & Sons, Ltd.     

Determination of total mercury in environmental and biological samples by flow injection cold vapour atomic absorption spectrometry

A simple and accurate method has been developed for the determination of total mercury in environmental and biological samples. The method utilises an off-line microwave digestion stage followed by analysis using a flow injection system with detection by cold vapour atomic absorption spectrometry.

The method has been validated using two certified reference materials (DORM-1 dogfish and MESS-2 estuarine sediment) and the results agreed well with the certified values. A detection limit of 0.2 ng g⁻¹ Hg was obtained and no significant interference was observed. The method was finally applied to the determination of mercury in river sediments and canned tuna fish, and gave results in the range 0.1–3.0 mg kg⁻¹.     

The solvent venting injection technique in capillary supercritical fluid chromatography

A solvent venting technique for injection of volumes up to 1 μl on 50 μm i.d. SFC columns has been compared to direct injection methods. The peak broadening and peak splitting observed with direct injection have been examined and found to be related to the starting pressure, the column temperature, and the sample solvent, in addition to the sample volume. The solvent venting technique removed peak splitting and improved the column efficiency. With a proper selection of experimental conditions, the sample recovery was 100%. The major part of the solvent was eluted in 15–20 s. Several applications have been demonstrated.     

Titanium production in a plasma reactor: A feasibility investigation

The feasibility of producing titanium metal from titanium tetrachloride in a thermal plasma under equilibrium and adiabatic expansion conditions has been theoretically investigated. Free energy minimization and adiabatic expansion calculations to simulate a nozzle expansion were used to study the practicality of production. The crucial requirements for the production of titanium powder from TiCl₄ and H₂ appear to be rapid quenching of the plasma gas at high temperature (e.g., 3700 K) and appropriate reactant concentrations. Quenching of tire plasma gas and production of titanium powder can be achieved by adiabatic expansion through a nozzle. Preliminary experimental data indicate that titanium powder of approximately 5 nm in size can be produced in an argon plasma rising a nozzle expansion approach.     

Capillary gas chromatography of pesticide residues in foods: Application of a split/splitless inlet system

Residue mixtures of pesticides in foods which were difficult to separate by packed-column gas chromatography were determined by capillary gas chromatography and electron capture detection. Manual injections of sample and reference standard were made with a 10 μL syringe on a septum-enclosed, split/ splitless inlet system. Optimal peak height repeatability (± 3%( was achieved with three-μL injections which were made within time periods of four hours or less. The average linearity coefficient (slope( obtained for detector response as a function of solution concentration was 1.1.     

流动注射—在线分离富集与原子光谱检测联用技术

现代分析化学发展的重要特征之一是分析方法从离线/手动操作向在线/自动操作方向转化。流动注射(FI)作为非均匀和非平衡状态下的溶液处理和微量进样技术,是实现上述转化的有力工具。FI可与不同的分离富集和检测手段结合,具有很强适应性和实用性。在众多联用技术中,FI—在线分离富集与原子光谱检测联用技术特别受到分析化学界的青睐。这种联用不仅可以克服常规离线操作费时、污染环境和试样/试剂消耗大的缺点,而且可大大提高分析效率,显著改善分析方法的灵敏度与选择性,进行多种成分同时检测(对ICP—AES,DCP—AES