Mass transport in metals under intensive impulse reactions

An unusually high mobility of atoms under intensive impulse reactions is explained by the behavior of point defects at the shock wave front. It is shown that either a shock wave front or moving dislocations can capture the interstitials, or they can be thermally activated in the direction of the shock wave propagation.     

基于同步辐射加速器的康普顿背散射γ射线源(Ⅰ)产生MeV量级γ光子的数值计算

提出在筹建的上海同步辐射装置上建造一条MeV量级γ射线束及应用站,采用μm波长的红外(或远红外)激光与储存环中3.5GeV电子束进行康普顿背散射,从而获得能区为1—25MeV的康普顿背散射γ光子束,该光子束具有高强度、高极化度(线和圆极化)、准单色、方向性好的优点,可以广泛地应用于核物理和核天体物理基础研究及相关的应用研究领域.介绍了康普顿背散射的基本原理,并结合储存环参数给出了光子束性能的数值计算结果.     

Mathematical Modeling, Control, Computer Simulation and Laboratory Experiments of a Spatial Servopneumatic Parallel Robot

In this paper, the special construction of a parallel robot, called spatial servopneumatic multi-axis test facility, will be discussed. The investigations include the following aspects: (i) the laboratory set-up of the robot, (ii) various results obtained in laboratory experiments, taking into account quite different control algorithms and command-input signals, (iii) a comparison of the laboratory experiments with the computer simulations of Part I of this paper, and ({vi}) a quality check of the results compared with the cost of the different controller realizations. The results of both the computer simulations and the laboratory experiments show: (i) The dynamic behavior of the parallel structure can be tremendously improved by using sophisticated nonlinear control algorithms. (ii) This improvement has to be paid by a drastically increased amount of work for deriving the model equations and control algorithms, and by augmented hardware cost of the sensing elements and controller electronics. (iii) Carefully developed model equations and identified model parameters provide theoretical models of the complex parallel structure that are very close to reality. This enables the design engineer to systematically investigate constructive alternatives of the design parameters, sensor and actuator concepts, and control strategies of the MAP prior to their hardware realization.This work has been supported by the German Science Foundation (DFG) under Contract No. Ha 1666/6-3.     

A compact shock-assisted free-piston driver for impulse facilities

A free-piston driver that employs entropy-raising shock processes with diaphragm rupture has been constructed, which promises significant theoretical advantages over isentropic compression. Results from a range of conditions with helium and argon driver gases are reported. Significant performance gains were achieved in some test cases. Heat losses are shown to have a strong effect on driver processes. Measurements compare well with predictions from a quasi-one-dimensional numerical code. Received 7 September 1996 / Accepted 5 October 1996     

Multicriteria Semi-Obnoxious Network Location Problems (MSNLP) with Sum and Center Objectives

Locating a facility is often modeled as either the maxisum or the minisum problem, reflecting whether the facility is undesirable (obnoxious) or desirable. But many facilities are both desirable and undesirable at the same time, e.g., an airport. This can be modeled as a multicriteria network location problem, where some of the sum-objectives are maximized (push effect) and some of the sum-objectives are minimized (pull effect).We present a polynomial time algorithm for this model along with some basic theoretical results, and generalize the results also to incorporate maximin and minimax objectives. In fact, the method works for any piecewise linear objective functions. Finally, we present some computational results.     

Some sufficient conditions for oscillation of impulsive delay hyperbolic systems with Robin boundary conditions

This paper deals with the oscillation problems of delay hyperbolic systems with impulses. Some sufficient conditions for oscillations of impulsive delay hyperbolic systems with Robin boundary conditions are obtained and the criteria of oscillation of the systems are established.     

一阶线性脉冲时滞微分不等式和方程

本讨论一类一阶线性脉冲时滞微分不等式和方程解的振动性质，获得了此类不等式免最终正解或最终负解以及方穆所有解振动的新的充分条件。     

考虑顾客便利半径和质量阈值的竞争设施选址问题

在竞争设施选址问题中,顾客选择行为是决定设施占领市场份额的重要因素,其描述了需求在设施之间的分配方式。为了贴近顾客真实的光顾行为,本文提出了一种考虑顾客便利半径和质量阈值的顾客选择规则,并研究了在该规则下市场中新进入公司的竞争设施选址问题。提出了一种基于排名的遗传算法(RGA)求解该问题,并将该算法与经典遗传算法(GA)和基于排名的离散优化算法(RDOA)进行了比较,结果说明了算法的有效性以及模型中质量阈值的重要性。     

脉冲色谱法测定金属铬中的氢

本文采用脉冲色谱法温室金属铬合中的氢含量，用正交试验法选择了最佳分析条件（含加热时间，加热初级电流，试样重量，浴料及浴比），建立了锡浴法测定铬中氢的方法，方法精度为５．５％。     

Improvement of plant parameters of the ROBO gamma irradiation facility due to design modification

Two industrial scale, “ROBO” type ⁶⁰Co gamma irradiation facilities have recently been put into operation in Syria and Peru, and the dosimetry commissioning of both plants have been carried out to determine dose distribution within products and to calculate plant parameters such as efficiency, dose uniformity ratio and throughput. There are some design modifications between the two plants in connection with the location of the carriers with respect to the source plaque and also to each other. The effect of these construction modifications on the plant parameters is discussed in the analysis of the dose distribution data measured in the carriers with depth and height among the four irradiation rows on both sides of the source plaque. The plant parameters were also calculated for different product densities using the technical data of the facilities, and the calculated and measured results were compared to each other.