Fully developed mixed convection in horizontal and inclined tubes with uniform heat flux using nanofluid

Fully developed laminar mixed convection of a nanofluid consists of water and Al₂O₃ in horizontal and inclined tubes has been studied numerically. Three-dimensional elliptic governing equations have been solved to investigate the flow behaviors over a wide range of the Grashof and Reynolds numbers. Comparisons with previously published experimental and numerical works on mixed convection in a horizontal and inclined tube are performed and good agreements between the results are observed. Effects of nanoparticles concentration and tube inclinations on the hydrodynamics and thermal parameters are presented and discussed. It is shown that the nanoparticles concentration does not have significant effects on the hydrodynamics parameters. Heat transfer coefficient increases by 15% at 4 Vol.% Al₂O₃. Skin friction coefficient continually increases with the tube inclination, but the heat transfer coefficient reaches a maximum at the inclination angle of 45°.     

Extension of a combined analytical/numerical initial value problem solver for unsteady periodic flow

Here we describe analytical and numerical modifications that extend the Differential Reduced Ejector/ mixer Analysis (DREA), a combined analytical/numerical, multiple species ejector/mixing code developed for preliminary design applications, to apply to periodic unsteady flow. An unsteady periodic flow modelling capability opens a range of pertinent simulation problems including pulse detonation engines (PDE), internal combustion engine ICE applications, mixing enhancement and more fundamental fluid dynamic unsteadiness, e.g. fan instability/vortex shedding problems. Although mapping between steady and periodic forms for a scalar equation is a classical problem in applied mathematics, we will show that extension to systems of equations and, moreover, problems with complex initial conditions are more challenging. Additionally, the inherent large gradient initial condition singularities that are characteristic of mixing flows and that have greatly influenced the DREA code formulation, place considerable limitations on the use of numerical solution methods. Fortunately, using the combined analytical–numerical form of the DREA formulation, a successful formulation is developed and described. Comparison of this method with experimental measurements for jet flows with excitation shows reasonable agreement with the simulation. Other flow fields are presented to demonstrate the capabilities of the model. As such, we demonstrate that unsteady periodic effects can be included within the simple, efficient, coarse grid DREA implementation that has been the original intent of the DREA development effort, namely, to provide a viable tool where more complex and expensive models are inappropriate. Copyright © 2002 John Wiley & Sons, Ltd.     

DF/HF化学激光器HYLTE喷管的副喷管质量流量系数

对DF/HF化学激光器HYLTE喷管的副喷管质量流量进行了数值和理论计算,得出入口滞止压力在0.01~0.4MPa之间、喉道半高度在0.1~0.9mm之间的喷管的氘气,氢气和氦气质量流量系数,总结出质量流量系数随入口滞止压力和喉道高度的变化规律,并给出拟合公式,为副喷管的设计提供依据。     

Conceptions of function translation: obstacles, intuitions, and rerouting

A horizontal translation of a function is the focus of this study. We examine the explanations provided by secondary school students and secondary school teachers to a translation of a function, focusing on the example of the parabola y=(x−3)² and its relationship to y=x². The participants’ explanations focused on attending to patterns, locating the zero of the function, and the point-wise calculation of function values. The results confirm that the horizontal shift of the parabola is, at least initially, inconsistent with expectations and counterintuitive to most participants. We articulate possible sources of this perceived inconsistency and describe a pedagogical approach aimed at resolving it.     

VICON程序模拟氧碘化学激光器3维喷管流场的可行性探讨

 用VICON程序对化学氧碘激光器(COIL)喷管冷流场进行了3维模拟,得出的计算区几何较准确地反映了模拟装置的几何变化。主气流方向和副气流方向的分点数反映出了此2维平面内的气动特性,对不同流量的模拟结果对比分析得出穿透过度与穿透不够一样,致使主副气流混合不好。对带化学反应的情况进行了模拟,显现出副气流从喷孔出来后穿进主气流的马蹄形结构的变化过程,这些说明VICON程序可用来模拟研究COIL喷管流场特性。     

Continuous flame oxidation in supercritical water

Abstract

Continuous flames have been observed in Supercritical water oxidation (scWO) of isopropyl alcohol (IPA), using a vertical continuous reactor with sapphire windows and a mixing nozzle. Two types of continuous flame were confirmed: the one was long pale blue colored and the other was red short cone shaped, changing blue to red at around air ratio 2.0. The flame was strongly influenced by IPA concentration, air ratio and design of the mixing nozzle. Results for decomposition of PA are presented for IPA concentrations ranging from 600 up to 28260 ppm as TOC and initial reactor temperatures, were mostly around 490°C, at 25 MPa. Decomposition rate at steady state was over 99.9%. Experimentally measured CO₂ and O₂ concentrations at the flue gas were in good agreement with theoretically calculated values. Even for low air ratio as 1.1, high decomposition rate without CO, NO, NO₂ was achieved.     

SILEX-1装置上等离子体尾场加速电子初步实验

激光等离子体加速电子机制可以产生准单能的高能电子束, 近年来成为国际上的研究热点. 中国工程物理研究院激光装置已经能够达到286TW的输出功率, 为国内在该领域的研究提供了实验条件. 文章介绍了在SILEX-1装置上开展的激光等离子体加速电子的初步实验, 并对测得结果进行讨论, 为下一步实验的进行提供了准备条件.     

自由旋涡气动窗口全流场的数值模拟

建立自由旋涡气动窗口全流场仿真模型,对大密封压比气动窗口的全流场展开数值研究,得到自由旋涡气动窗口的流场结构,发现大密封压比气动窗口形成的自由旋涡射流在光束输出通道内无明显的波系结构.根据模拟结果对自由旋涡气动窗口的性能进行优化,对自由旋涡喷管上壁面型线进行二次粘性修正.优化自由旋涡射流场后,激光器输出光束通道内压力分布稳定上升;增加扩压器外端壁吹气1.19MPa、内端壁吹气1.68MPa时,自由旋涡射流总能提高,气动窗口密封压力从37.5torr降低至6torr.该研究结果对自由旋涡气动窗口技术的发展具有参考意义.     

膨胀机力学模拟试验装置

为了适应当前发展的需要,本试验装置可以研究G-M制冷机中的膨胀机在动态环境下能否可靠工作,为其提供了强有力的试验平台。本装置可以单独实现水平面的旋转或垂直面的翻转,还可以同时实现水平面的旋转和垂直面的翻转。对G-M制冷机扩大应用领域是不可或缺的试验装置。     

Optimal design of a convergent-barrel cold spray nozzle by numerical method

A convergent-barrel (CB) cold spray nozzle was designed through numerical simulation. It was found that the main factors influencing significantly particle velocity and temperature include the length and diameter of the barrel section, the nature of the accelerating gas and its pressure and temperature, and the particle size. Particles can achieve a relatively low velocity but a high temperature under the same gas pressure using a CB nozzle compared to a convergent-divergent (CD) nozzle. The experiment results with Cu powder using the designed CB nozzle confirmed that particle deposition can be realized under a lower gas pressure with a CB nozzle.