中心直裂纹平台巴西圆盘复合型动态断裂实验研究

制作了中心直裂纹平台巴西圆盘（cracked straight through flattened Brazilian disc-CSTFBD）试样,利用分离式霍普金森压杆（split Hopkinson pressure bar-SHPB）加载,进行了岩石纯Ⅰ型和复合型（Ⅰ＋Ⅱ型）动态断裂实验。由于加载角（载荷方向与裂纹线的夹角）在制作试样时已经通过裂纹线与试样平台的位置关系确定,因此在实验中可以方便而准确地实施加栽。比较了纯Ⅰ型加载和复合型加载下压杆上记录的入射波、反射波和透射波的波形。采用实验与数值相结合的方法,将实验得到的动态载荷输入有限元程序,得到了纯Ⅰ型试样的动态断裂韧度和复合型试样的两种动态应力强度因子的时间历程。计算了加载角为15°的试样应力强度因子的复合比（KI（t）／KⅡ（t））,此计算值与文献结果吻合较好,验证了实验方法的有效性。     

钙质砂的准一维应变压缩试验研究

利用?100 mm的Hopkinson压杆研究了不同预压力条件下,受侧限约束的钙质砂在500～800 s^-1应变率范围、0～200 MPa压力范围内的动态力学特性,并利用HUT106D万能材料试验机研究了相同条件钙质砂在2×10^-3 s^-1应变率、0～120 MPa压力范围内的静态力学特性。研究发现,当再次加载超过一定值后,预压力对钙质砂力学特性的影响不大;Tait物态方程可以描述钙质砂的静态容变关系及高压下的动态容变关系;钙质砂的体积压缩过程存在应变率效应。     

用于软材料的双子弹电磁驱动SHPB系统

软材料的动态力学性能研究一直备受关注,目前分离式Hopkinson压杆(split Hopkinson pressure bar,SHPB)技术是其最重要的测试手段,然而在测试超软材料时实验装置设计方面仍存在许多有待改进之处。本文中研制了一套双子弹电磁驱动SHPB系统,使用聚碳酸酯作为杆件材料以克服软材料试件带来的诸多困难,引入了双子弹设计方案解决了电磁驱动方式难以应用于非铁磁材料的问题,并有效保证了子弹速度的准确控制。使用双子弹电磁驱动SHPB系统和传统金属SHPB装置同时对硅胶材料的动态力学性能进行了测试,实验结果的吻合性验证了本套系统的可靠性。应用双子弹电磁驱动SHPB系统开展了聚乙烯醇(polyvinyl alcohols, PVA)水凝胶这种超软材料在高应变率下的实验,成功表征出其动态力学性能。     

几种高性能纤维束的冲击动力学性能实验研究

利用直拉式Hopkinson装置研究了碳纤维、无碱E玻璃纤维、Kevlar 4 9/96 4 /96 4c、Twaron2 0 0 0、DyneemaSk6 6等纤维的动态拉伸性能。与准静态加载条件下相比 ,纤维束的拉伸强度基本与应变速率无关(玻璃纤维除外 ) ,而纤维束的弹性模量和失效应变随应变率的升高而明显变大。从高分子物理以及两种无机纤维的内部微观结构特征对纤维的力学性能与加载速率的关系进行了初步的物理阐释。讨论了实验数据的发散原因。     

Influence of Molecular Conformation on the Constitutive Response of Polyethylene: A Comparison of HDPE, UHMWPE, and PEX

The current work presents the characterization and comparison of the mechanical response of three different industrial forms of polyethylene. Specifically, high-density polyethylene (HDPE), ultra high molecular weight polyethylene (UHMWPE), and cross-linked polyethylene (PEX) were tested in compression as a function of temperature (−75 to 100°C) and strain-rate (10⁻⁴ to 2,600 s⁻¹). The responses of UHMWPE and PEX are very similar, whereas HDPE exhibits some differences. The HDPE samples display a significantly higher yield stress followed by a flat flow behavior. Conversely UHMWPE and PEX both exhibit significant strain hardening after yield. The temperature and strain-rate dependence are captured by simple linear and logarithmic fits over the full range of conditions investigated. The yield behavior is presented in terms of an empirical mapping function that is extended to analytically solve for the mapping constant. The power-law dependence on strain-rate observed in some polymers is explained using this mapping function.     

大理岩动态拉伸强度及弹性模量的SHPB实验研究

提出了获取脆性材料动态拉伸强度及弹性模量的实验步骤及相关记录数据的分析方法。利用直径为100mm的分离式Hopkinson压杆径向冲击巴西圆盘和平台巴西圆盘试样,测试了大理岩在高应变率加载下的动态力学性能。应力波加载下动态劈裂拉伸圆盘在试样中心产生了约45/s的拉伸应变率。分析了实验的有效性并考虑了试样两个端面应力波波形差异的影响以提高实验结果的精度。结果表明准静态下的公式可适用于动态劈裂拉伸实验;大理岩的动态拉伸强度及弹性模量比静态时有明显的增加。     

多功能SHPB装置及水泥石材料的动态性能研究

为了研究在一定温度和压力下的水泥石的动态力学性能，研制了多功能ＳＨＰＢ材料动态性能测试装置，该装置可分别进行材料的拉伸，压缩，扭转性能测试，拉，压试验可以在带围压和温度的三向应力状态下进行，文中还对水泥石改性材料的动态力学性能进行了实验研究。     

Blast wave measurements close to explosive charges

The paper reports the results of experimental measurements of the reflection pressures close to spherical charges of TNT. These measurements were made using a pressure bar technique. Charge weights of up to 3.6 kg were used, with the reflecting plane in the range 25 to 300 mm from the charge surface.A possible wave interaction model is discussed, to account for the observed pressure profiles, and its qualitative correctness checked by means of numerical simulation.This article was processed using Springer-Verlag T_EX Shock Waves macro package 1.0 and the AMS fonts, developed by the American Mathematical Society.     

冲击载荷下土的动态力学性能研究

 利用分离式霍普金森压杆（Split Hopkinson Pressure Bar,SHPB）技术,研究了土体在不同应变率条件下的冲击动态力学性能,发现土体有明显的应变率效应,与静载相比,冲击载荷下土的动强度和动模量均有很大的提高。根据实验曲线的特征,以一根线性弹簧和两个不同松弛时间的Maxwell体并联的粘弹性模型来表达土体的损伤型粘弹性本构模型,两个Maxwell体分别表示土体的低应变率响应和高应变率响应,模型的数值拟合曲线与实测动态本构曲线具有较好的一致性。拟合参数表明,土体对低应变率的响应与混凝土相同,对高应变率的敏感性远远高于混凝土。     

Dynamic and Quasi-Static Propagation of Compaction Waves in a Low-Density Epoxy Foam

We conducted dynamic and quasi-static compression experiments with low-density (ρ = 120 kg/m³) epoxy foam specimens. The specimens had a 10.0-mm-square cross-section and a length of 19.3 mm. Dynamic experiments were conducted with a modified split Hopkinson pressure bar (SHPB), and the quasi-static experiments were conducted with a hydraulic load frame device (MTS-810). In both cases, the specimens were loaded from one end at a constant velocity. Equally spaced grid lines were marked on the specimens to monitor the deformation history. Digital images taken at equally spaced time intervals gave the positions of each grid line. These images showed that a constant end-face velocity V produced a compaction wave front that traveled at a constant velocity C in both dynamic and quasi-static experiments. We described these results with a shockwave analysis that used a locking solid material model.