有限长FGM圆筒的热/机应力的解析解

利用微分方程的级数求解方法,分析了两端简支的有限长功能梯度圆筒的轴对称稳态热弹性问题,推导出了稳态温度场与应力场的解析解。分析中采用指数函数模型来描述FGM圆筒中材料性能在厚度方向的连续变化,同时忽略温度对材料性能的影响。另外,论文以金属钼和多铝红柱石制成的功能梯度圆筒为例,给出了稳态温度场和应力场的数值结果。     

Axisymmetric frictionless contact of functionally graded materials

The main interest of this study is a new method to solve the axisymmetric frictionless contact problem of functionally graded materials (FGMs). Based on the fact that an arbitrary curve can be approached by a series of continuous but piecewise linear curves, the FGM is divided into a series of sub-layers with shear modulus varying linearly in each sub-layer and continuous at the sub-interfaces. With this model, the axisymmetric frictionless contact problem of a functionally graded coated half-space is investigated. By using the transfer matrix method and Hankel integral transform technique, the problem is reduced to a Cauchy singular integral equation. The contact pressure, contact region and indentation are calculated for various indenters by solving the equations numerically. An erratum to this article can be found at     

Graded PZT ceramics for piezoelectric transformers

In the present study two types of the synthesized Pb(Zr_1−xTi_x)O₃ (PZT) powders differing in Zr/Ti ratio were used to prepare the spatially inhomogeneous (i.e., graded) structure. A position-dependent chemical composition was expected to cause the property gradient. Disk-shaped compacts were prepared in a way such that two different orientations of the radial gradients were formed. The solid state sintering under pressure was utilized to prepare ceramics. Simultaneous thermal analysis was used to study thermal behavior of the ceramic powders. Graded PZT ceramics were characterized using X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. It was also characterized in terms of its dielectric properties by both bridge technique and the impedance spectroscopy. On the basis of graded PZT ceramics the disk-shaped radial mode piezoelectric transformer was developed and fabricated.     

Application of a hybrid meshless technique for natural frequencies analysis in functionally graded thick hollow cylinder subjected to suddenly thermal loading

A hybrid meshless technique based on composition of meshless local Petrov–Galerkin method (for spatial variables) and Newmark finite difference method (for time domain) is developed for natural frequencies analysis of thick cylinder made of functionally graded materials (FGMs). The FG cylinder is assumed to be under suddenly thermal loading, axisymmetric and plane strain conditions. The dynamic behaviors and time history of displacements are obtained in time domain using Green–Naghdi (GN) theory of coupled thermo-elasticity (without energy dissipation). Using fast Fourier transform (FFT) technique, the displacements are transferred to frequency domain and all natural frequencies are illustrated for various grading patterns of FGMs. The variations of mechanical properties in FG thick hollow cylinder are considered to be in nonlinear volume fraction law through radial direction. The presented hybrid meshless technique furnishes a ground to analyze the effects of various grading patterns of FGMs on natural frequencies, which are obtained employing GN coupled thermo-elasticity governing equations. Also, the frequency history and natural frequencies are illustrated for various grading patterns at several points across thickness of cylinder.     

Exact solutions of functionally graded piezoelectric material sandwich cylinders by a modified Pagano method

The three-dimensional (3D) coupled analysis of simply-supported, functionally graded piezoelectric material (FGPM) circular hollow sandwich cylinders under electro-mechanical loads is presented. The material properties of each FGPM layer are regarded as heterogeneous through the thickness coordinate, and obey an exponent-law dependent on this. The Pagano method is modified to be feasible for the study of FGPM sandwich cylinders. The modifications are as follows: a displacement-based formulation is replaced by a mixed formulation; a set of the complex-valued solutions of the system equations is transferred to the corresponding set of real-valued solutions; a successive approximation method is adopted to approximately transform each FGPM layer into a multilayered piezoelectric one with an equal and small thickness for each layer in comparison with the mid-surface radius, and with the homogeneous material properties determined in an average thickness sense; and a transfer matrix method is developed, so that the general solutions of the system equations can be obtained layer-by-layer, which is significantly less time-consuming than the usual approach. A parametric study is undertaken of the influence of the aspect ratio, open- and closed-circuit surface conditions, and material-property gradient index on the assorted field variables induced in the FGPM sandwich cylinders.     

Self-consistent elastoplastic stress solutions for functionally graded material systems subjected to thermal transients

In this work, a self-consistent constitutive framework is proposed to describe the behaviour of a generic three-layered system containing a functionally graded material (FGM) layer subjected to thermal loading. Analytical and semi-analytical solutions are obtained to describe the thermo-elastic and thermo-elastoplastic behaviour of a three-layered system consisting of a metallic and a ceramic layer joined together by an FGM layer of arbitrary composition profile. Solutions for the stress distributions in a generic FGM system subjected to arbitrary temperature transient conditions are presented. The homogenisation of the local elastoplastic FGM behaviour in terms of the properties of its individual phases is performed using a self-consistent approach. In this work, power-law strain hardening behaviour is assumed for the FGM metallic phase. The stress distributions within the FGM systems are compared with accurate numerical solutions obtained from finite element analyses and good agreement is found throughout. Solutions are also given for the critical temperature transients required for the onset of plastic deformation within the three-layered systems.     

Two-dimensional thermoelastic analysis of a functionally graded cylindrical panel due to nonuniform heat supply

This paper is concerned with the theoretical treatment of the steady-state thermoelastic problem of a functionally graded cylindrical panel due to nonuniform heat supply in the circumferential direction. The thermal and thermoelastic constants of the cylindrical panel are expressed as power functions of the radial coordinate. We obtain the exact solution for the two-dimensional temperature change in a steady state, and thermal stresses of a simple supported cylindrical panel under the state of plane strain. Some numerical results are shown in figures and tables. Furthermore, the influence of the nonhomogeneity of the material, the radius ratio and the span angle upon the temperature change, displacements and stresses is investigated.     

An axisymmetric problem of an embedded mixed-mode crack in a functionally graded magnetoelectroelastic infinite medium

This paper investigates the problem of an axisymmetric penny shaped crack embedded in an infinite functionally graded magneto electro elastic medium. The loading consists of magnetoelectromechanical loads applied on the crack surfaces assumed to be magneto electrically impermeable. The material’s gradient is parallel to the axisymmetric direction and is perpendicular to the crack plane. An anisotropic constitutive law is adopted to model the material behavior. The governing equations are converted analytically using Hankel transform into coupled singular integral equations, which are solved numerically to yield the crack tip stress, electric displacement and magnetic induction intensity factors. A similar problem but with a different crack morphology, that is a plane crack embedded in an infinite functionally graded magneto electro elastic medium, was considered by the authors in a previous work (Rekik et al., 2012) [25]. While the overall solution schemes look similar, the axisymmetric problem resulted in more mathematical complexities and let to different conclusions with respect to the influence of coupling between elastic, electric and magnetic effects. The main focus of this paper is to study the effect of material non-homogeneity on the fields’ intensity factors to understand further the behavior of graded magnetoelectroelastic materials containing penny shaped cracks and to inspect the effect of varying the crack geometry.     

A novel class of graded cylinders neutral to host shafts of arbitrary cross-sections under torsion

A novel class of graded cylinders is proposed as neutral inclusions inside host shafts of arbitrary cross-section under Saint-Venant's torsion. The graded cylinder is made of cylindrically orthotropic materials with position varying quantities. The profiles of the two distinct shear moduli in the radial and tangential directions follow specific forms based on an arbitrarily selected function along the radial distance. We show that this type of graded cylinders can serve as universal neutral inclusions within host shafts of arbitrary cross-sections. In addition, we find that the associated warping fields can be exactly determined in terms of simple exponents of the selected function. This suggests that, by tuning the gradation parameter, one can manipulate the warping field of the inserted cylinder without disturbing the fields inside the host shaft. This finding is an original contribution to the existing solvable configurations of composite shafts under torsion.     

功能梯度压电材料反平面裂纹问题

基于三维弹性理论和压电理论，导出了材料系数在横观各向同性平面内梯度分布的压电体的状态方程，进而对材料系数指数函数规律分布的半无限大压电体中的反平面裂纹问题进行了求解，利用Fourier变换给出了半无限大压电体中位移，应力，电势及电位移的解析表达式，并求得了裂纹尖端的应力强度因子和电位移强度因子，分析了不同的非均匀材料系数及几何尺寸对它们的影响。