Effects of Polymer Bridging and Electrostatics on the Rheological Behavior of Aqueous Colloidal Dispersions†

Effects of a low molecular weight physically adsorbed polyethylene oxide (PEO) and the range of the electrostatic repulsion on the rheological behavior of silica dispersions (as a model system) has been investigated. Particular attention is given to the evolution of the rheological behavior with increasing the polymer concentration in the system and also effectiveness of the polymer as a dispersant under extreme conditions (high ionic strength). Results indicate that at small separation distances and low polymer coverage, the polymer chains are long enough to adsorb on the surface of two particles simultaneously causing bridging flocculation in the system and hence increasing the viscosity and linear viscoelastic functions of the dispersion. A significant increase was observed in the viscosity of the dispersion at salt concentrations high enough to eliminate electrostatics between the particles. Under these conditions,the viscosity of the system increased significantly when PEO was added to the dispersion showing that at high electrolyte concentrations, a neutral polymer such as PEO is not able to stabilize the system.     

Output dynamics and stabilisation of a multi-mode double-clad Yb-doped silica fibre laser

The intensity dynamics of the double-clad Yb fibre laser have been characterised. Stabilisation of the fibre laser intensity by using uniform bi-directional pumping is demonstrated. For the single-end-pumped Yb fibre laser, the output becomes more stable for the shorter fibre length due to the higher threshold of stimulated Brillouin scattering, SBS, and Kerr effects and the reduction of saturated absorber effects caused by any unpumped fibre section. By additional pumping in a double-end-pumped configuration, the output power can be scaled higher before detecting high intensity pulses initiated by SBS in the Yb fibre laser due to the reduction of saturable absorption effect. It is confirmed that uniform pumping enhances the stability of the laser output.     

Structural properties of charged diblock copolymer solutions

Aqueous micellar solutions of ionic/neutral block copolymers have been studied by light scattering, small angle neutron scattering and small angle X-ray scattering. We made use of a polymer comprised of a short hydrophobic block (polyethylene-propylene) PEP and of a long polyelectrolytic block (polystyrene-sulfonate) PSSNa which has been shown previously to micellize in water. The apparent polydispersity of these micelles is studied in detail, showing the existence of a few large aggregates coexisting with the population of micelles. Solutions of micelles are found to order above some threshold in polymer concentration. The order is liquid-like, as demonstrated by the evolution with concentration of the peak observed in the structure factor (), and the degree of order is found to be identical over a large range of concentrations (up to 20 wt%). Consistent values of the aggregation number of the micelles are found by independent methods. The effect of salt addition on the order is found to be weak. Received: 19 June 1997 / Received in final form: 4 September 1997 / Accepted: 9 October 1997     

Quantitative millimetre wavelength spectrometry at pressures approaching atmospheric: II. Determination of oxygen at atmospheric pressure

A millimetre wavelength (MMW) Fabry-Perot cavity spectrometer described in earlier work has been applied to the measurement of oxygen absorption at 60 GHz and atmospheric pressure in a gas matrix of nitrogen. The spectrometer has also been modified such that the MMW source is stabilised by a sub-harmonic microwave signal transmitted by an infrared carrier on a single mode telecommunications fibre optic. This is a step towards developing an instrument comprising minimal electronic components that can perform MMW spectrometry remotely. Oxygen determinations were achieved by monitoring the change in the quality factor (Q) of a resonant Fabry-Perot cavity due to the presence of an absorbing sample. The MMW absorption of the sample was determined by incrementing the frequency modulation (FM) deviation of the source frequency scanning the cavity resonance profile. The response curve of absorption signal versus fraction of oxygen in nitrogen was found to be linear throughout the working range of 1-100% O₂ (v/v) in N₂ with a slope of (1.407±0.007)×10⁻⁴ m⁻¹ (% O₂)⁻¹. The detection limit (3× standard deviation of the background) was found to be ∼0.8% (v/v). The MMW technique employed is advantageous since, unlike common MMW techniques, there is no vacuum requirement. Application of this method, to the monitoring of oxygen in gas mixtures of practical importance, is proposed. Values of the oxygen spectral absorption coefficients of lines between 55 and 60 GHz were measured at reduced pressure and found to be within ±2% of previous literature values. A pressure correction coefficient for O₂ absorption at 60 GHz in the 45-121 kPa range was obtained and found to be (1.354±0.014)×10⁻⁴ m⁻¹ kPa⁻¹.     

Use of NIRS technology with a remote reflectance fibre-optic probe for predicting major components in bee pollen

In the present work, we study the use of near infra-red spectroscopy (NIRS) technology together with a remote reflectance fibre-optic probe for determination of the major components in bee pollen. The method allows immediate control of the bee pollen without prior sample treatment or destruction through direct application of the fibre-optic probe to the sample.The regression method employed was modified partial least squares (MPLS). The calibration results obtained using 45 samples of bee pollen allowed the measurement of protein, moisture, ash, reducing sugars, and pH with multiple correlation coefficients (RSQ) and prediction corrected standard errors (SEPC) of 0.91, 0.56% for protein, of 0.78 and 0.49% for moisture; 0.92 and 0.049% for ash; 0.81 and 1.32 g of glucose/100 g of bee pollen; 0.84 and 0.15 for pH, respectively.The prediction capacity of the pattern was checked by applying it to samples of unknown pollen in external validation.     

Determination of Fibre Pore Structure: Influence of Salt,pH and Conventional Wet Strength Resins

It has been shown, in the present investigation, that the two methods used to investigate the pore size distribution of unbleached chemical pulps, i.e. inverse size exclusion chromatography (ISEC) and nuclear magnetic resonance (NMR), give different average pore radius for the pores inside the fibre wall. This is due to the way in which these experiments are performed and the sensitivity of the methods to different types of pores in the cell wall. It was also shown that the two methods gave different results when changing the pH and the ionic strength of the pulp suspension. The pore radius, as detected with ISEC, decreased with both increasing ionic strength and decreasing pH, indicating a loose structure of the exterior of the fibrillar network. However, the pore radius as detected with NMR, was virtually unaffected when increasing the ionic strength, indicating a very rigid structure of the interior of the fibre wall. Decreasing pH though, lead to a decrease in pore radius indicating that upon protonation of the carboxylic groups in the fibre wall, the electrostatic repulsion is diminished and the average pore radius decreases. The NMR technique was also used to study wet strength aid penetration into the fibre wall. It was shown that wet strength aids with a small molecular weight, penetrated the fibre wall, as detected by a decrease in pore radius. It was also shown that addition of different wet strength aids increased the tensile index of the sheet and decreased the fibre strength, measured as zero span-strength of the sheets.     

Dissipative structures formed in the course of drying the colloidal crystals of silica spheres on a cover glass

Macroscopic and microscopic dissipative structural patterns formed in the course of drying the deionized aqueous colloidal crystal suspensions of silica spheres (diameter: 103 nm) on a cover glass have been observed. Spoke-like and ring-like patterns are formed in the macroscopic scale; the former is the crack in the sphere film and the latter is the hill accumulated with spheres formed around the outside edge. The neighbored inter-spoke angle, thickness of the film, and other morphological parameters have been discussed as a function of sphere concentration, concentration of sodium chloride, and the inclined angle of the cover glass. Fractal patterns of the mud cracks are observed in the microscopic scale. Capillary forces between spheres at the air-liquid surface and the relative rates between the water flow at the drying front and the convection flow of spheres are important for the pattern formation. Electronic Publication     

Nonequilibrium Brownian dynamics simulations of shear thinning in concentrated colloidal suspensions

The effect of interparticle forces on shear thinning in concentrated aqueous and nonaqueous colloidal suspensions was studied using nonequilibrium Brownian dynamics. Hydrodynamic interactions among particles were neglected. Systems of 108 particles were studied at volume fractions of 0.2 and 0.4. For the nonaqueous systems, shear thinning could be correlated with the gradual breakup of small flocs present because of the weak, attractive secondary minimum in the interparticle potential. At the highest shear rate for=0.4, the particles were organized into a hexagonally packed array of strings. For the strongly repulsive aqueous systems, the viscosity appeared to be a discontinuous function of the shear rate. For=0.4, this discontinuity coincided with a transition from a disordered state to a lamellar structure for the suspension.     

Effect of Electrode Pattern on the Column Structure and Yield Stress of Electrorheological Fluids

For electrorheological (ER) suspensions, the aggregate structures of particles were observed in electric fields by the use of transparent cells with different electrode patterns. Although the suspension is dispersed to noninteracting particles without electric fields, many aggregates are formed on the electrode surface in electric fields. Since the dipole–dipole interactions cause chain structures of particles and equilibrium conformations of chains are always aligned with electric field, the aggregates indicate the presence of columns spanning the electrode gap. The particle concentration in columns which are developed between parallel-plate electrodes is about 22 vol %. In striped electrodes, the particles construct striped aggregates along the electrodes and no particles remain in the insulating region. The particle concentration in striped aggregates is about 35 vol %. The nonuniformity of electric field is responsible for the high particle concentration. The increase in particle concentration of column lead to the high yield stress of electrified suspension. Therefore, the ER performance of suspension as an overall response can be improved by the electrode design.     

Tying together the ultrastructural modifications of wood fibre induced by pulping processes with the mechanical properties of paper

The composition and ultrastructural arrangement of cell wall polymers in wood fibres have determining influence on the properties of wood derived materials. It is therefore important to improve our understanding of the relationship between fibres organisation, the modifications induced by pulping treatments, and the resulting paper sheet mechanical properties. The different treatments to which fibres are subjected during the manufacturing of pulps and papers induce morphological and micro-structural alterations due to the removal of wall constituents and of microfibrillar elements. The impact of pulping processes on fibres was investigated at the ultrastructural scale of transmission electron microscopy. Particular attention was given to the effects of beating in refiners at various intensities on the ultrastructure of fibres. The most characteristic effects consisted of delaminations, microfibril disorganisation, and even fractures, of varying importance depending on the intensity of the mechanical refining. The consequences of internal alterations and surface modifications of the fibres were examined in relation to the paper sheet mechanical properties. Correlations between the type of alteration observed in the fibres and its possible impact on a given paper mechanical property are suggested. With similar approaches, the effects of drying and recycling were studied.