Rice husk silica as a sustainable filler in the tire industry

In this paper, we studied commercially available precipitated rice husk silica (RHS) with conventional precipitated silica, which has nearly the same surface area, and replaced part of the carbon black with RHS and conventional silica in a basic tread formulation. All formulations were mixed with the same amount of filler during the study. Silica was used at 15, 30 and 50 phr loading, and part of the carbon black was replaced by silica. Compound curing characteristics, physical properties, rebound resilience, heat generation, abrasion loss, dynamic properties and morphology were analyzed. The results indicated that RHS demonstrated compound properties comparable to those of conventional silica. As part of the carbon black was replaced with conventional silica, a slower cure rate, higher rebound resilience, lower heat generation, lower abrasion loss, and lower tan delta were observed with no significant change in physical properties, but some changes in physical properties were observed using one way ANOVA analysis. We found the same trend when replacing part of the carbon black with RHS, such as a slower cure rate, higher rebound resilience, lower heat generation, lower abrasion loss, and lower tan delta with no significant change in physical properties, but some changes in physical properties were observed using one way ANOVA. This sustainable material could be used to replace conventional silica in tire compounding, as well as to replace a portion of carbon black with RHS for improved heat build-up, rolling resistance, and abrasion loss.     

Quantum states in fabricating poly-Si films

The quantum states are presented in these processions of fabricating poly-Si films. Amorphous silicon films prepared by PECVD has been crystallized by conventional furnace annealing (FA) and rapid thermal annealing (RTA), respectively. It is found that the thin films grain size present quantum states with the increasing of the gas flow ratios of SiH₄, H₂ mixture, substrate temperatures, frequency power, annealing temperature and time.     

164Lu的三轴超形变核态的理论计算

用三维TRS(totalrouthiansurface)自洽理论对奇奇核164Lu的位能面进行了计算,计算结果与实验上得到的ε2=0.38基本一致,从而从理论上确认了164Lu是三轴超形变核,并且指出了存在三轴超形变带的两个组态. Total routhian surface in~(164)Lu nuclei is calculated according to the three dimensional Total Routhian Surface (TRS) theory. The result of the calculation is in agreement with the experiment. At the same time, two TSD bands could be assigned to the configuration(π\(1/2), α=1/2)(ν\(5/2), α=1/2), (π\(1/2), α=1/2)(ν\(3/2), α=-1/2).     

164Lu的三轴超形变核态的研究

利用TRS方法对双奇核¹⁶⁴Lu的位能面进行了计算,确认了¹⁶⁴Lu核的一条三轴超形变带,结果与实验较好地符合,同时指出了三轴超形变带的一个具体的组态     

Microwave-assisted synthesis of new pyrimido[4′,5′：4,5]thiazolo[3,2-α] benzimidazol-4（3H）-one derivatives in solvent-free condition

Microwave-assisted synthesis of new 2-arylpyrimido[4′,5′：4,5]thiazolo[3,2-α]benzimidazol-4（3H）-ones from 3-aminothia- zolo[3,2-α]benzimidazol-2-earboxamide and aroyl halides in solvent-free condition is described. In comparison with classical conditions the reactions are faster and the yields are higher under microwave irradiation.     

不同干燥过程对超细TiO2粉体性质的影响

考察了采用不同干燥工艺制备的TiO2粉体在粒子形貌、颗粒大小与分布、晶相组成以及比表面积和孔结构等织构和结构性质方面的差异。结果表明，利用常规的干燥方法，由水凝胶脱水所得的颗粒，颗粒间严重团聚，颗粒粒径大且分布不均匀，比表面积和孔体积最小；由醇凝胶直接脱水，则可以显著提高粉体的织构性能．而采用超临界流体干燥法则可以进一步提高粉体的性能，比表面积由水凝胶的4．88m2·g－1增大到113．8m2·g－1，提高了近30倍；孔体积由0．027cm3·g－1增大到0．41cm3·g-1．大约提高了15倍；而且其能够有效地防止粒子间的团聚，较好地保持了湿凝胶的网络结构，使颗粒尺寸降低且分布均匀，可重复性好．     

Determination of vitamin C and preservatives in beverages by conventional capillary electrophoresis and microchip electrophoresis with capacitively coupled contactless conductivity detection

The separation and detection of commonly used preservatives (benzoate, sorbate) and vitamin C by both conventional CE and microchip electrophoresis with capacitively coupled contactless conductivity detection is presented. The separation was optimized by adjusting the pH-value of the buffer and the use of hydroxypropyl-beta-CD (HP-beta-CD) and CTAB as additives. For conventional CE, optimal separation conditions were achieved in a histidine/tartrate buffer at pH 6.5, containing 0.025% HP-beta-CD and 0.1 mM CTAB. LOD ranged from 0.5 to 3 mg/L (S/N = 3) and the RSDs for migration time and peak area were less than 0.1 and 2%, respectively. A considerable reduction of analysis time can be accomplished by using microchip electrophoresis without significant loss in sensitivity under optimal separation conditions. A histidine/tartrate buffer at pH 6.5, incorporating 0.06% HP-beta-CD and 0.25 mM CTAB, gave detection limits ranging between 3 and 10 mg/L and satisfactory reproducibilities of < or =0.4% for the migration time and < or =3.5% for the peak area. The methods developed are useful for the quantitative determination of food additives in real samples such as soft drinks and vitamin C tablets.     

Synthesis and biological evaluation of 4-thiazolidinone derivatives as antitubercular and antimicrobial agents

New series of N-[2-{2-(substitutedphenyl)-4-oxo-5-(substitutedbenzylidene)-1,3-thiazolidine}-iminoethyl]-2-amino-5-nitrothiazole, 5(a–m) have been synthesized from 2-amino-5-nitrothiazole as a starting material by conventional as well as microwave methods. All the synthesized compounds 4(a–m) were screened for their antibacterial and antifungal activities against some selected bacteria and fungi and antitubercular activity screened against Mycobacterium tuberculosis. The structure of all the synthesized compounds were confirmed by chemical and spectral analyses such as IR, ¹H NMR, ¹³C NMR and FAB-Mass.     

Green synthesis of novel quinoline based imidazole derivatives and evaluation of their antimicrobial activity

We have described the conventional and microwave method for the synthesis of N-(4-((2-chloroquinolin-3-yl)methylene)-5-oxo-2-phenyl-4,5-dihydro-1H-imidazol-1-yl)(aryl)amides 3a–l. It is observed that the solvent-free microwave thermolysis is a convenient, rapid, high-yielding, and environmental friendly protocol for the synthesis of quinoline based imidazole derivatives when compared with conventional reaction in a solution phase. Antimicrobial activity of the newly synthesized compounds is screened in vitro on the following microbial cultures: Escherichia coli (MTCC 443), Pseudomonas aeruginosa (MTCC 1688), Staphylococcus aureus (MTCC 96), Streptococcus pyogenes (MTCC 442), Candida albicans (MTCC 227), Aspergillus niger (MTCC 282), Aspergillus clavatus (MTCC 1323). All the synthesized bio-active molecules are tested for their in vitro antimicrobial activity by bioassay namely serial broth dilution. Among these compounds 3c, 3d, 3f, 3h and 3j show significant potency against different microbial strains. All the compounds have been characterized by IR, ¹H NMR, ¹³C NMR and mass spectral data. On the basis of statistical analysis, it is observed that these compounds give significant co-relation.     

Simultaneous determination of peroxydisulfate and conventional inorganic anions by ion chromatography with the column‐switching technique

The application of ion chromatography with the column‐switching technique for the simultaneous analysis of peroxydisulfate and conventional inorganic anions in a single run is described. With this method, conventional inorganic anions were separated by consecutive elution through both the guard column and separation column, but peroxydisulfate that only passed through the guard column had a good peak shape and short retention time. A series of standard solutions consisting of target anions of various concentrations from 0.01 to 75 mg/L were analyzed, with a correlation coefficient (r) ≥ 0.9990. The limits of detection were in the range of 0.49–9.84 μg/L based on the S/N of 3 and a 25 μL injection volume. RSDs for retention time, peak area, and peak height were all <1.77%. A spiking study was performed with satisfactory recoveries between 97.6 and 103.4% for all anions. The quantitative determination of peroxydisulfate and conventional inorganic anions in surface waters was accomplished within 18 min by this column‐switching technique.