锂离子电池用纳米Sn/SnSb合金三维复合负极的制备及性能

采用多步电沉积法制备的三维多孔铜箔作为集流体、低温液相化学还原法制备的纳米Sn/SnSb 合金作为负极材料, 制备出一种新型三维多孔结构的纳米Sn/SnSb合金复合负极. 通过与普通负极电化学性能的对比实验发现, 这种新型三维复合负极具有如下优点: 三维多孔网络结构提高了负极活性材料与集流体之间的结合力, 使不含粘结剂电极的制备成为可能; 有效缓解了高容量负极活性材料在充放电过程中的体积膨胀, 提高了负极活性材料的循环性能, 当循环到第30周时, 普通负极剩余容量为初始容量的33%, 而三维复合负极剩余容量为初始容量的41%; 三维铜箔集流体的特殊结构为高容量负极活性材料提供了一个良好的导电环境, 使电极反应进行得更加完全, 从而获得了更高的电极比容量, 普通负极初始容量为480 mAh·g-1, 而三维复合负极达到了800 mAh·g-1. 纳米Sn/SnSb合金三维复合负极良好的电化学性能为锂离子电池负极结构的设计开发提供了新的思路.     

聚酯废弃物改性植物油沥青粘结剂的红外研究

采用蒸馏厂的下脚料——各种植物油沥青(棉油沥青、豆油沥青、混合油沥青)为主要原料,用聚酯废弃物为改性剂,经裂解、酯化等工艺制备成三种铸造用植物油沥青粘结剂(MB)。同时采用红外光谱和热重分析等手段对该三种粘结剂的基团结构,性能与固化机理进行探索,并与合脂粘结剂比较。 结果表明：改性粘结剂的主要成分与合脂粘结剂大致相同,且具有更高的干拉强度、更慢的发气速度等优异性能,达到甚至超过合脂粘结剂的性能,可用于Ⅰ级型芯砂的粘结,而且成本低廉。     

Analysis of artist’s palette on a 16th century wood panel painting by portable and laboratory Raman instruments

Non-destructive analysis of the artist’s palette of ancient wooden panel paintings is a difficult task and studies are rare. Here we compare different methods of analysis of a wooden panel painting, dated to the early sixteenth century, mainly by Raman and infrared spectroscopies. Raman spectra were recorded on collected/sampled micrometric fragments using portable Raman instruments with laser excitation lines at 532 and 785 nm and transportable Raman instruments at 532, 633 and 785 nm; a fixed 1064 nm Raman spectrometer was also used. Infrared analyses were performed in Attenuated Total Reflection (ATR-FTIR) mode. Using the portable instrument, the Raman spectra evidenced white lead, calcite and vermilion only. Raman spectra recorded by transportable and fixed instruments enabled the identification of most of the artist’s palette: (i) white lead, calcite, gypsum and cerussite for white colour; (ii) vermilion, red lead, litharge, haematite for red; (iii) azurite, indigo and lapis lazuli for blue. IR spectra gave information on the organic binding media. XRF analysis on a brown pigment suggested an heterogeneous mixture of a red pigment (such as haematite and/or minium) and a green one as malachite. GC-MS analysis allowed identifying terpenic resin in the composition of the outer protective layer.     

Analysis of organic colouring and binding components in colour layer of art works

Two methods of analysis of organic components of colour layers of art works have been tested: IR microspectroscopy of indigo, Cu-phthalocyanine, and Prussian blue, and MALDI-TOF-MS of proteinaceous binders and a protein-containing red dye. The IR spectra distortion common for smooth outer surfaces and polished cross sections of colour layer of art works is suppressed by reflectance measurement of microtome slices. The detection limit of the three blue pigments examined is ~0.3 wt% in reference colour layers in linseed oil binder with calcite as extender and lead white as a drying agent. The sensitivity has been sufficient to identify Prussian blue in repaints on a Gothic painting. MALDI-TOF-MS has been used to identify proteinaceous binders in two historical paintings, namely isinglass (fish glue) and rabbit glue. MALDI-TOF-MS has also been proposed for identification of an insect red dye, cochineal carmine, according to its specific protein component. The enzymatic cleavage with trypsin before MALDI-TOF-MS seems to be a very gentle and specific way of dissolution of the colour layers highly polymerised due to very long aging of old, e.g. medieval, samples.     

A computational modeling for micropipette-manipulated cell detachment from a substrate mediated by receptor-ligand binding

We perform computer simulations of using a micropipette to attach and then detach a red blood cell on a flat substrate mediated by receptor-ligand binding. The cell is initially swollen with osmotic pressure, coated with a specific kind of bio-molecular receptor, sucked into the micropipette and then allowed to approach a substrate coated with the corresponding ligand. Binding interactions between the membrane-bound receptors and the substrate-anchored ligands cause the cell to spread onto the substrate surface. While the specific interaction between a pair of receptor and ligand is described by a chemical reaction equation, a traction-separation law is adopted to describe the non-specific interactions between the receptors and the substrate. A surface diffusion model is introduced to describe the mobility of the receptors within the cell membrane. After the equilibrium state of adhesion is achieved, a pulling force is applied on the micropipette to detach the cell from the substrate. The governing equations of cell-substrate interactions and receptor diffusion are implemented in a finite element scheme to simulate the entire process of cell suction, cell spreading, receptor diffusion, and cell detachment, and to investigate the effects of membrane stiffness, cohesive parameters, micropipette size, and suction pressure on the unbinding kinetics of the cell. The simulation results are shown to agree qualitatively with existing experimental data.     

FT-IR,EPR and SEM–EDAX investigation of some accelerated aged painting binders

The results of FT-IR, SEM–EDAX and EPR investigations of some binders used in classical paintings and artificial aged binders, i.e. linseed oil, hen yolk and linseed oil/hen yolk are presented and discussed. Carbon dioxide, sulfur dioxide as well as nitrogen oxides were used as aging agents. Accordingly, the FT-IR spectra of all binders showed a set of characteristic modifications. This makes it possible to select the most representative bands which, acting as sui generis fingerprints, provided evidence of certain specific combinations for each binder and the polluting agents. The EPR spectroscopy was helpful in choosing the most appropriate chemical reactions whose products were identified in the corresponding FT-IR spectra. Moreover, the SEM–EDAX data allowed us to establish that, in the case of CO₂ aging, the patina consists of finely dispersed carbon aggregates. Within this context, the most plausible chemical reactions explaining the observed changes were proposed and discussed.     

Use of near infrared spectroscopy in a study of binding media used in paintings

The present study illustrates the use of near infrared spectroscopy in the conservation and restoration field. This application of the technique, widely used in other fields such as the agricultural and food industries, is very interesting due to two of its features: rapidity and non-destructiveness. In this study, three classification algorithms have been used to attempt to correlate the spectra of the samples under study—mixtures of two pigments (one organic and the other inorganic)—with binder recipes found in literature. Some of these recipes have very similar compositions, but they were distinguished into groups, depending on the painting technique associated with them.     

EPR spectra of γ-irradiated dl-α-alanine supported on molecular sieves

The aim of the work was to collect information concerning boundary effects which are suspected in α-alanine dosimeters consisted of powdered microcrystalline α-alanine and binders. In our experiments the conventional binders were replaced by molecular sieves (MS). MS are inorganic porous materials (host structures) with well organized and uniform intra-crystalline pore systems of nano-scale size. The guest molecules can be either physically adsorbed on very large inner MS surface, or chemically bound to the active sites. They can be also encapsulated inside the intracrystalline cavities. The EPR spectra of gamma irradiated dl-α-alanine supported on NaY, CeY, SOD, mordenite, ZSM-5 and ALPO₄-5 were very similar to that one observed for irradiated microcrystalline dl-α-alanine. In the case of alanine supported on HY an initial EPR spectrum was different and only after some weeks it made resemble to the well known quintet observed in microcrystalline samples. In sodalites synthesized in the presence of dl-α-alanine EPR signal appeared in non-irradiated sample was very low and structureless. The irradiated sample showed a distinct spectrum which was quite different from that one observed for crystalline dl-α-alanine.     

Polyimide Compounds For Post-Lithium Energy Storage Applications

The exploration of cathode and anode materials that enable reversible storage of mono and multivalent cations has driven extensive research on organic compounds. In this regard, polyimide (PI)-based electrodes have emerged as a promising avenue for the development of post-lithium energy storage systems. This review article provides a comprehensive summary of the syntheses, characterizations, and applications of PI compounds as electrode materials capable of hosting a wide range of cations. Furthermore, the review also delves into the advancements in PI based solid state batteries, PI-based separators, current collectors, and their effectiveness as polymeric binders. By highlighting the key findings in these areas, this review aims at contributing to the understanding and advancement of PI-based structures paving the way for the next generation of energy storage systems.