元素在石墨炉内石墨探针表面上的原子化机理研究：Ⅶ.锗的原子化机理

本文应用Ｘ－射线衍射，Ｘ－射线光电子能谱，俄歇电子能谱和其它一些实验，考察石墨炉升温过程中氟化锗，锗酸钠在石墨探针表面上的形态变化，阐明了它们的原子化机理：ＧｅＦ２与Ｎａ２ＧｅＯ３首先分解为ＧｅＯ２，ＧｅＯ２还原为ＧｅＯ，后者在＞２４００Ｋ热分解产生自由态的锗原子，ＧｅＦ２和Ｎａ２ＧｅＯ３的原子化均源于ＧｅＯ（ｇ）的气相分解。原子化的升温过程中，在１４００－２４００Ｋ ＧｅＦ２和Ｎａ２ＧｅＯ３都产     

WLY100型顺序扫描ICP光谱仪设计方案的一些考虑

本文对国产ＷＬＹ１００型顺序扫描ＩＣＰ光谱仪在设计中对单色仪，高频发生器，扫描机构，测光系统，短紫外光域的测量，恒温，气流控制与软件编制等方案的选择作了详尽的阐述，稳妥的方案使研制工作顺利进行，保证整机一次成功。     

On the evolution of two-dimensional patterns in an inviscid liquid sheet

We perform an analysis of the pattern formation for a moving sheet of inviscid fluid. The sheet, which is assumed to have an infinite horizontal extent, moves at some prescribed velocity into a passive surrounding gas. The sheet’s thickness is assumed much smaller than the horizontal scale of the fluid motion. By considering a system that is symmetric with respect to the horizontal planes, long scale asymptotics are used to reduce the full governing equations in three dimensions to a set of three coupled nonlinear partial differential equations for the horizontal components of the velocity field and the height of the interface profile. The interfacial conditions consisting of the kinematic and normal stress balance are incorporated into these evolution equations. Investigations are carried out as function of the sole dimensionless parameter, namely the Weber number. A small amplitude stability analysis around the planar gas–liquid interface reveals that wave patterns in the form of traveling plane waves occur subcritically, and are therefore unstable. The reduced evolution equations are solved numerically for fixed values of the Weber number. Since the reduced system of equations is homogeneous, the wave motion is generated by initial conditions. Five initial conditions have been imposed: one-dimensional rolls, two-dimensional squares, two-dimensional hexagons, two-dimensional ridges, and smooth peaks. The ensuing evolution of the liquid sheet’s shape and corresponding flow fields are described by illustrations of the changes in the sheet’s morphology with time.     

某些离解能、电子亲合能等的G2计算与评价

PoPle及其合作者创立的Gaussian再简称GZ）理论［‘－’］，以其相对可靠的化学精度和相应较小的计算量已经引起了实验和理论化学家们的广泛关注问．p。ple等人在他们的GZ文章中强调了GZ的理论计算结果在研究离解能等化学问题中与精确实验数据之间的偏差普遍不大于全8．狄J规厂‘．我们近期的研究表明＊’1，＊2和优（＊则在计算一般化学反应能量中，绝大多数情况下，分别都能保证结果与实验偏差在全8．4和士13kJ·mol‘以内．近年来，已有大量的研究工作表明，GZ的理论结果已广泛用于未知实验数据的预测、已有实验数据的评价和修正等…     

Light intensity and image visualization of GDI injector sprays according to nozzle hole arrangements

The light intensity measurement and image visualization of multi-hole injection spray due to different hole arrangements and hole numbers were investigated. The light intensities and behavior characteristics of the GDI spray were analyzed through the axial and diagonal spray penetration, cone angle, and spray area from the spray images by using the image visualization system and image analysis system. The atomization performance of GDI injectors was analyzed by the local and overall Sauter mean diameter (SMD) measurement.     

Polycarbonate nanoparticles spray coated on silicon substrate using micro-electromechanical-systems-based high-frequency ultrasonic nozzle

Mono-disperse polycarbonate (PC) nanoparticles 20 nm in diameter was spray coated on silicon substrate using a novel high-frequency ultrasonic nozzle. Specifically, Bisphenol-A polycarbonate with a molecular weight (M_w) of approximately 6.4 × 10⁴ g/mol was first dissolved in pyridine. The resulting solution was sprayed into surfactant-containing de-ionized (DI) water using a 300 kHz silicon-based multiple-Fourier horn nozzle (MFHN). As pyridine was extracted into the water, PC nanoparticles formed but remained dispersed. This suspension of PC nanoparticles was then sprayed onto a silicon substrate using a 500 kHz 3-Fourier horn nozzle. Scanning electron microscopy (SEM) of the dried substrate revealed that PC nanoparticles were spread uniformly with no aggregation.     

The atomization current and droplet size of ethanol in two different small-scale electro-spraying systems

An experimental study on electro-spraying from small-scale combustors is carried out using liquid ethanol as fuel. Two systems of electro-spraying are employed in the present study; one is a nozzle system (without a ring electrode) and the other is a nozzle-ring system (with a ring electrode). The photos of electro-spraying at the cone-jet mode are taken by a digital camera. The voltage drop across the resistance in the loop is measured by a data acquisition instrument, and the atomization current is calculated according to Ohm's Law. The size and velocity of electro-spraying droplets are measured by a Phase Doppler Anemometer. A non-dimensional analysis on atomization current is completed to explain the electro-spraying phenomena of liquid at the stable cone-jet mode. The results show that, the lower atomization current and droplet velocity corresponds to smaller size of droplet. Based on the results of non-dimensional analysis, it is found that the dimensionless atomization current in both the nozzle system and nozzle-ring system obeys the scaling law as square root of the dimensionless flow rate. The charge density is of a −1.5 power dependence on droplet diameter. Both of the nozzle and the nozzle-ring systems show a good agreement with Rayleigh instability.     

Enrichment of surfactant from its aqueous solution using ultrasonic atomization

Dilute aqueous solutions of dodecyl-benzenesulfonic acid sodium salt (DBS-Na) and polyoxyethylenenonylphenyl ethers (PONPEs) were ultrasonically atomized. The surfactants were concentrated in collected mist droplets. The enrichment ratio increased with decreasing surfactant concentration. Depending on the surfactant’s molecular weight and affinity to water, different enrichment ratio was observed in the range of low feed concentrations. For anionic surfactant, DBS-Na, the enrichment ratio was significantly improved by KCl addition and a peak appeared on the plot of the ratio against KCl concentration. Addition of NaCl or CaCl₂ · 2H₂O to the surfactant solution also enhanced the enrichment ratio; however, the effect was relatively small. Such behaviors of the ratio were interpreted as enhanced interfacial adsorption of the surfactant and a lack of supply of surfactant monomers from liquid bulk because of slow breaking of surfactant micelles. Time required for collecting an amount of mist was also observed. Among the three salt systems, the time for KCl system was twice as long as others. This fact suggested that the formation of smaller droplets in KCl system.     

Acoustic resonance and atomization for gas-liquid systems in microreactors

It is shown that a liquid slug in gas–liquid segmented flow in microchannels can act as an acoustic resonator to disperse large amounts of small liquid droplets, commonly referred to as atomization, into the gas phase. We investigate the principles of acoustic resonance within a liquid slug through experimental analysis and numerical simulation. A mechanism of atomization in the confined channels and a hypothesis based on high-speed image analysis that links acoustic resonance within a liquid slug with the observed atomization is proposed. The observed phenomenon provides a novel source of confined micro sprays and could be an avenue, amongst others, to overcome mass transfer limitations for gas–liquid processes in flow.     

Comparison of theoretical methods for assessing the heat of formation of C1 and C2 chlorofluorocarbons and hydrochlorofluorocarbons

The heat of formation of a number of key C₁ and C₂ chlorofluorocarbons and hydrochlorofluorocarbons have been calculated by G3, G3MP2, G3MP2B3 and G3B3 methods. Based on the results of the atomization approach, it was found that the errors are approximately dependent upon the number of C-F or C-Cl bonds. Moreover, the bond additive correction (BAC) procedure and isodesmic reactions approach improved the accuracy and decreased these system errors significantly. The extended comparison between the BAC procedure and isodesmic reaction approaches had been made; the latter yielded the best results and showed broader applicability.