盐酸伊达比星杂质A的合成工艺优化及其高效液相分析

通过对盐酸伊达比星脱羟基杂质A的合成研究，为盐酸伊达比星的质控标准提供参考。以盐酸伊达比星为起始原料，经过4步反应得到脱羟基杂质A。本文提供了盐酸伊达比星杂质A的制备方法以及高效液相色谱分析方法，为杂质含量控制提供了依据。该工艺可以稳定、快速制备高纯度脱羟基杂质A，制备总收率为57.20%，纯度为57.20%，其结构经¹H NMR， ¹³C NMR和MS(ESI)表征。     

离心力场作用下多孔介质中强制对流换热的研究

对离心流化床中空气通过多孔物料层的强制对流换热进行了理论和实验研究。获得了气流和物料间强制对流换热的准则关联式。研究结果表明,在气流速度和温度梯度方向一致的条件下,强制对流换热比通常的边界层强制对流换热有所强化,其换热的准则关联式具有 Nu=CRePr的线性形式。从而验证了改变气流方向和热流密度矢量之间夹角可以强化换热的这一强化传热新原理。     

Recent Experimental Results of HL-1M Tokamak and Progress of HL-2A Project

Recent experimental results of HL-1M tokamak and progress of HL-2A project are presented. Strong fishbone instability was observed during off-axis ECRH. This is first observation of the fishbone instability purely driven by energetic electrons produced by ECRH. The MBI was first proposed and demonstrated on HL-1M. Recently new results of MBI experiment were obtained by increasing the pressure of gas. A stair-shape density increment was obtained with high-pressure multi-pulse MBI just like the density evolution behavior during the multipellet injection. It is shown     

竖直波纹板表面凝结过程的强化传热研究

根据波纹板壁面与凝结液间的表面张力使液膜减薄的强化凝结传热的机理建立数学模型,计算了波纹板槽道谷底和波峰两侧液膜传热的综合效果与当量竖直平壁相比较的传热结果,提出了一种可兼顾通流截面和强化效应的双尺度波纹形式,对双尺度波纹、普通波纹板和当量平板进行了凝结传热性能比较实验,表明双尺度波纹板凝结侧传热系数可比普通波纹板增强约40％。     

催化剂薄层内甲烷水蒸气重整反应强化管内对流换热的数值模拟

本文以竖直圆管内壁催化剂薄层内发生甲烷水蒸气重整反应强化对流换热作为研究对象,对其进行了数值模拟．结果发现,催化剂薄层内的吸热化学反应可以有效地强化对流换热,降低流体和壁面温度,从而对壁面起到保护作用;极限热流密度的大小与流体的入口温度有关,存在最佳入口温度使极限热流密度最大．     

Banach空间上有界可逆线性变换逆变换的结构

Fillmore在[1]中得到一个定理:设A,T是Banach空间X上的线性变换,A有界,若Lat(A) Lat(T)且AT=TA,则T是A的多项式.在本文里,以此作为引理,讨论了Banach空间上可逆线性变换A在什么情况下,A-1可表示为A的多项式.本文最主要的结论是定理3.4:设X是Banach空间,A是X上的有界线性变换,且可逆,则A-1是A的多项式当且仅当A-1是A的局部多项式.     

Development of Vacuum Monitoring System in the HL-2A tokamak

HL-2A is the first divertor tokamak in China. The vacuum system is one of the important parts of the HL-2A tokamak, which has to be work well during the physics campaign in 2004. As the tokamak machine is separated from the operation staff during discharges, to guarantee the safe and reliable operation of the vacuum system, it is necessary to watch the vacuum system outside the machine hall with an automatic monitoring system. The paper describes the design and manufacture of the monitoring system.     

The Design for Automation of Pellet-Forming Process in HL-2A Pellet Fueling System

In the ever fusion experiments in SWIP, pellet forming process was carried out through adjusting relative devices by staff member in site, which will make every pellet-forming process slight distinction and will result in pellet difference in shape, size and intensity. In the intervals of HL-2A discharges, staff member have to go site to accomplish the pellet-forming process, this wastes human power and increase the potential danger. So it is necessary to develop a remote control system to perform the pellet-forming process. The control system needs have the features of real-time, reliability and be easy to operate and maintain.     

Vacuum System for HL-2A Tokamak

The vacuum system of today＇s tokamak devices is designed to meet the operational requirements of the experiments. The operation can be divided into five modes, （1） pumping down and leak detecting of the vacuum vessel, （2） baking, （3） plasma-facing component （PFC） conditioning, （4）evacuating and controlling of the particles at plasma edge, （5） plasma discharge experiments.     

Control of LHCD on the HL-2A Tokamak

in order to study non-indutive plasma current production, the lower hybrid current drive（LHCD） experiment on the HL-2A tokamak is carried out. Simultaneously a microcomputer has been used to control the whole LHCD system. During the experiment this year, we can monitor and protect the LHCD system by use of the microcomputer control system, which will imediately switch off the microwave power to be launched into the tokamak if the plasma is disrupted. All this ensure that the microwave is injected into the equipment correctly.