Ultrasound imaging and evaluation of lesion induced by High Intensity Focused Ultrasound

The present study was to investigate the differential imaging method for detecting HIFU (High Intensity Focused Ultrasound)-induced lesions and the estimation of variation of attenuation for lesion evaluation with log spectral difference algorithm. Experiment results of bovine muscle and liver in vitro were acquired. Several algorithms for lesion detection - Absolute Difference (AD), Sum Absolute Differences (SAD) and Sum Squared Differences (SSD) - were analyzed with several window sizes and threshold values. Then three attenuation parameters were compared to evaluate the degree of tissue damage. It was found that variation of the mean attenuation △α was an effective parameter to evaluate lesions.     

新试剂二溴氟基偶氮氟胂分光光度法快速测定热镀锌合金中微量铈

报道了新试剂DBF-FAsA的合成及其应用于测定锌合金中添加微量元素铈量的方法。在强酸性体系中铈与二溴氟基偶氮氟砷(DBF-FAsA)形成蓝紫色配合物,其最大吸收波长为624nm,表观摩尔吸光系数ε为1.20×105L·mol-1·cm-1,线性范围为0～1.0μg/mL。该法可用于锌合金或中间锌合金材料中微量铈的测定。     

Deposition of Diamond-Like carbon Films by High-Intensity Pulsed Ion Beam Ablation at Various Substrate Temperatures

Diamond-like carbon (DLC) films have been deposited on to Si substrates at substrate temperatures from 255℃ to 400O℃ by a high-intensity pulsed-ion-beam (HIPIB) ablation deposition technique. The formation of DLC is confirmed by Raman spectroscopy. According to an x-ray photoelectron spectroscopy analysis, the concentration of sp^3 carbon in the films is about 40% when the substrate temperature is below 300℃ C. With increasing substratetemperature from 25℃ to 400℃, the concentration of sp^3 carbon decreases from 43% to 8%. In other words,sp3 carbon is graphitized into sp^2 carbon when the substrate temperature is above 300℃. The results of xray diffraction and atomic force microscopy show that, with increasing the substrate temperature, the surface roughness and the friction coefficient increase, and the microhardness and the residual stress of the films decrease.     

稀土复合变质对新型铸造热锻模具钢组织与性能的影响

研究了稀土复合变质对新型铸造热锻模具钢（CHD钢）组织与性能的组织。结果表明，稀土复合变质能细化晶粒，并且随着稀土量的增加。细化效果明显；加入适量的稀土复合变质后，夹杂物数量明显减少，夹杂物趋于球化并均匀地分布在钢中，形态和分布得以了改善，向钢中加入稀土进行复合变质，能促进贝氏体、奥氏体和位错亚结构的形成，细化马氏体板条。当残留稀土含量为0.02%时，CHD钢的硬度、强度变化不大，断裂韧性（KIC）和疲劳裂纹扩展门槛值（△Kth）有所提高，冲击韧性、延伸率、断面收缩率提高了近一倍，抗热疲劳性能也最好。     

镧对Al—Si合金锶和钠变质的影响

在含有变元素锶或钠的铸造Ａｌ－Ｓｉ－Ｃｕ－Ｍｇ合金中添加微量镧，发现合金组织中同时存在在富镧和锶的化合物，而镧和钠不存在这种作用，在富镧的化合物中没有钠的富集，因此镧对锶和钠变质存在不同程度的影响。     

高强度聚乙烯醇/聚苯胺/聚吡咯/TiO2导电杂化水凝胶的制备与性能

本文以聚乙烯醇(PVA)、苯胺(ANI)、吡咯(Py)及钛酸丁酯(TBOT)为原料,通过溶胶-凝胶法、原位氧化聚合法及冷冻-融溶法一步得到聚乙烯醇/聚苯胺/聚吡咯/TiO 2(PVA/PANI/PPy/TiO 2)杂化水凝胶。结果表明,该杂化水凝胶具有优异的力学性能和导电性能。当n(ANI)∶[KG-*3/5]n(Py)=8∶[KG-*3/5]2(TBOT体积为100μL)时,其压缩强度高达2.45 MPa。同时,在外加电源的作用下,该凝胶能够使灯泡发光。当n(ANI)∶[KG-*3/5]n(Py)=2∶[KG-*3/5]8(TBOT体积为150μL)时,杂化水凝胶的电导率(0.25 S/m)最好。该杂化水凝胶有望广泛地应用在柔性可穿戴电子器件、安全离子电池、传感器和生物器件等领域。     

微量元素秘在稀土镁球铁中的作用

设计并试用了含微量元素机和不含铋的稀土镁钡钙多元球化剂BBC和BC。试验结果表明,二种球化剂能促进薄壁球铁件形核,增加铸件铸态铁素体量,减少以至消除铸态碳化物,特别是含铋的BBC效果更显著。采用扫描电镜、能谱和波谱分析,研究认为铋在稀土镁球铁中的作用是“吸附复合作用”和与稀土元素间的“化合复合作用”的综合。     

聚酯废弃物改性植物油沥青粘结剂的红外研究

采用蒸馏厂的下脚料——各种植物油沥青(棉油沥青、豆油沥青、混合油沥青)为主要原料,用聚酯废弃物为改性剂,经裂解、酯化等工艺制备成三种铸造用植物油沥青粘结剂(MB)。同时采用红外光谱和热重分析等手段对该三种粘结剂的基团结构,性能与固化机理进行探索,并与合脂粘结剂比较。 结果表明：改性粘结剂的主要成分与合脂粘结剂大致相同,且具有更高的干拉强度、更慢的发气速度等优异性能,达到甚至超过合脂粘结剂的性能,可用于Ⅰ级型芯砂的粘结,而且成本低廉。     

裂解气相色谱法分析铸造用聚苯乙烯泡沫塑料热解产物

采用裂解气相色谱法研究了汽化模铸造工艺用聚苯乙烯泡沫塑料在４５０～１０００℃温度范围内热分解产物的分布,定量测定了４种主要蒸气态热分解产物的含量。结果表明,所采用的分析方法对研究铸造用高分子材料热分解产物行之有效,而且方法简单、快速、准确。