能量回收型直线加速器

 能量回收型直线加速器(EnergyRecoveringLinacs,简称ERL),是一种新型的、发展中的加速器,它具有直线加速器的优质束流性能,具有接近环型加速器的高效率。已在自由电子激光等方面投入应用,并具有多方面的发展和应用前景。一、由来和优势我们知道,高频电子直线加速器是用高频电场加速沿直线轨道运动的电子束的装置。通常,电子束只通过直线加速结构一次,在达到要求的能量后,即离开直线加速器,或直接用于科学实验、医学放疗、材料辐照、自由电子激光驱动等;或注入到环型加速器中继续加速和积累,用于同步辐射光源或高能物理实验等。     

横向放大率法确定复合光学系统的基点

介绍了应用测量横向放大率确定两薄透镜组成的复合光学系统基点的方法。由于采用线阵光电耦合器件（CCD）测量物经光学系统成像的横向放大率，提高了测量精度。     

Decoherence Induced by Spin Chain Environment

We study the decoherence process of an exact solvable model that consists of a central spin-1/2 coupling to the surrounding anisotropy spin-1/2 chain in transverse fields. The Loschrnidt echo is calculated to study the character of decoherence with different degree of anisotropy. Our results show that the degree of anisotropy γ greatly affects the decoherence process of the central spin-system when the spin chain is in weak transverse fields, but it gives weak effect in the strong transverse field. The decoherence process of the central system changed dramatically along the line of the critical points, and this may be explained as the reflection of quantum phase transitions.     

透镜初级球差的横向剪切干涉条纹研究

利用玻璃平行平板构成简单的横向剪切干涉仪可以观察到单薄透镜形成的准直光束的剪切干涉条纹,由干涉条纹分布求出对应的几何像差和离焦量.用焦距为190 mm的单薄透镜做实验,实验结果与计算机模拟结果符合,说明可以从剪切干涉条纹的分布求出透镜的轴向调整误差和初级球差.     

横向放大率法测定光具组的基点

介绍了用横向放大率法确定两薄透镜组成的光具组基点的原理和方法,该方法采用线阵光电耦合器件(CCD)测量物经光学系统成像的横向放大率,进一步提高了测量精度.     

Double-Humped Transverse Density Profile in Two-Dimensional Chute Flow with Rough Sidewalls

We study a two-dimensional granular rapid flow with rough sidewalls stuck with the same size discs by molecular dynamics simulation. A transient state of the double-humped density profile in the flowing process has been found, which appears and moves as travelling wave and is the same as the phenomena in the recent experiments [Acta Phys. Sin. 53 （2004） 3389 （in Chinese）]. Our simulation shows that the rough sidewalls play an important role in the converting momentum of boundary discs from the vertical direction to the horizontal one through particle collisions to form this profile and the good elasticity of discs ensures this effect. The appearance of the double-humped profile may be a precursor, which determines if the whole flow will be far repulsed from the boundary and become dilute eventually.     

厄米-双曲余弦-高斯光束的瞄准稳定性

用失调叠加积分的方法 ,对厄米双曲余弦高斯光束的瞄准稳定性作了研究 ,得到了厄米双曲余弦高斯光束失调因子 ηm2 的精确解析公式和近似解析公式 ,并用数值计算了相对横向偏移和相对角向偏移对失调因子ηm2 的影响以及对精确解析公式和近似解析公式的适用范围作了分析和说明。     

A Comparison of Different Measures for Dynamical Event Mean Transverse Momentum Fluctuation

Various measures for the dynamical event mean transverse momentum fluctuation are compared with the real dynamical fluctuation using a Monte Carlo model. The variance calculated from the G-moments can reproduce the dynamical variance well, while those obtained by subtraction procedures are approximate measures for not very low multiplicity. Фpt, proposed by Gadzicki M and Mrowczynski S [Z. Phys. C 54 (1992)127], can also serve as an approximate measure after being divided by the square root of mean multiplicity.     

压电智能复合材料层合梁的力电耦合模型及层间应力分析

由于非凡的物理性能,石墨烯纳米片(GPL)被认为是最有吸引力的复合材料增强材料之一.GPL增强材料可以明显提高聚偏氟乙烯(PVDF)压电性能和力学性能.在力电载荷作用下,对含均匀石墨烯薄片增强(GSR)智能压电复合材料层合梁层间应力预测至关重要.若对受到力电耦合作用且层与层之间材料性能突变的压电层合梁层间剪切变形预测有误,则其层间应力过大可能导致层间失效.因此,论文提出一种适于分析此类问题且满足层与层之间相容性条件的有效力电耦合模型,用于含GSR致动器的复合材料层合梁层间应力分析.应用Reissner混合变分原理(RMVT),可以提高考虑力电耦合效应的横向剪应力预测精度.三维(3D)弹性理论和所选模型计算结果将用于评估所提梁模型性能.此外,还从力电载荷、压电层厚度、石墨烯体积分数和长厚比等方面对含GSR致动器复合材料层合梁力学响应特性进行了系统的研究.