Amphiphilic biodegradable poly(CL-b-PEG-b-CL) triblock copolymers prepared by novel rare earth complex: Synthesis and crystallization properties

Amphiphilic biodegradable poly(CL-b-PEG-b-CL) triblock copolymers have been successfully prepared by the ring-opening polymerization of ε-caprolactone (CL) employing yttrium tris(2,6-di-tert-butyl-4-methylphenolate) [Y(DBMP)₃] as catalyst and double-hydroxyl capped PEGs (DHPEG) as macro-initiator. The triblock architecture, molecular weight, thermal and crystallization properties of the copolymers were characterized by NMR spectra, SEC, DSC and WAXD analyses. The isothermal crystallization behavior of the copolymers was investigated by POM analysis in detail, which is greatly influenced by the length of PCL and PEG blocks. On the POM micrograph of PEG_10,000-(PCL₈₆₀₀)₂, a unique morphology of concentric spherulites was observed due to the sequent crystallization of the PCL and PEG blocks.     

新型环状聚(ε-己内酯-co-γ-三乙基硅氧基-ε-己内酯)的合成

设计合成了具有精确分子结构的聚合物对深入了解其结构与性能之间的关系起着至关重要的作用。研究了一种合成带有三乙基硅氧侧基的环状无规共聚酯的新方法。功能性单体γ-三乙基硅氧基-ε-己内酯(γ-Et3SiOεCL)和ε-己内酯(ε-CL)在环状引发剂2,2-二丁基-2-锡-1,3-二氧环庚烷(DSDOP)的作用下,进行活性开环聚合反应以制备活性环状无规共聚酯(LCP(εCLcoγEt3SiOεCL))前体,当单体完全转化后,以该活性环状前体作为大分子引发剂,引发反应性单体α-(1-丙烯酰氧乙基)-ε-己内酯(αAEεCL)进行嵌段聚合反应,合成了在活性中心附近带有不饱和双键的功能性环状嵌段共聚酯,即活性环状聚(ε-己内酯-co-γ-三乙基硅氧基-ε-己内酯)-b-(α-(1-丙烯酰氧乙基)-ε-己内酯)。最后该活性环状嵌段共聚酯在紫外光照射下,反应性单体结构单元中的双键发生分子内交联反应,从而制得稳定的不含有机锡的新型环状无规共聚酯cP(εCLcoγEt3SiOεCL)(Mn,NMR=28500)。采用SEC、1H NMR以及DSC等技术手段对聚合物的结构和性能进行表征。该方法的突出特点是能够高效地合成带有功能性侧基的高相对分子质量的环状无规共聚酯。     

树枝状嵌段聚合物D-PCL-b-PS在不对称末端受限条件下的结晶行为

研究了树枝状嵌段聚合物聚(ε-b-己内酯)-b-聚苯乙烯(D-PCL-b-PS)的分子结构对PCL链段受限结晶行为的影响.首先,通过活性正离子开环聚合(ROP)合成了树枝状的嵌段聚合物D-PCL.在此基础上用原子转移自由基聚合(ATRP)的方法,合成了树枝状的嵌段聚合物D-PCL-b-PS,在结晶的PCL链段的两个末端...     

用于基因传输及磁共振显像的聚乙烯亚胺-g-聚己内酯共聚物的合成与表征

采用可生物降解的聚己内酯改性聚乙烯亚胺,得到两亲性的接枝共聚物(PEI-g-PCL).该共聚物通过溶剂挥发法在水中自组装形成纳米粒子,其内部负载有超顺磁性四氧化三铁纳米粒子(SPIO)及质粒DNA(pDNA).研究表明,PEI-g-PCL聚合物自组装形成的颗粒为胶束状,无论是否负载SPIO纳米粒子都可以有效地负载pDNA,并对293细胞具有较高的转染效率.此类载体有望在基因转染的过程中利用磁共振手段进行实时、无创观测.     

聚己内酯在聚己内酯/聚乙烯基甲基醚共混体系中的结晶研究

通过示差扫描量热(DSC)、广角X射线衍射(WAXD)、小角X射线散射(SAXS)研究了聚己内酯(PCL)/聚乙烯基甲基醚(PVME)共混体系中PCL的结晶行为.研究结果表明,共混聚合物中PCL的结晶度几乎不随体系的组成而发生变化.共混物中PVME的存在没有改变PCL的晶体结构,但是随着PVME含量的增加,片晶之间的距离则大,这主要是由于非晶层增厚引起的.     

聚环氧乙烷-g-聚己内酯两亲性接枝共聚物的合成及药物释放行为

通过环氧丙醇(GL)与环氧乙烷(EO)的阴离子顺序开环聚合制备了水溶性嵌段共聚物PEO-b-PGL, 以PGL嵌段每个重复单元的侧羟基为引发点进一步引发ε-己内酯(CL)的开环聚合, 合成了结构规整的以聚环氧乙烷(PEO)为主链的两亲性接枝共聚物(PEO-b-PGL-g-PCL). 研究了PEO-b-PGL-g-PCL在水相中的自组装行为, 采用稳态荧光探针法测定了胶束的临界胶束浓度(cmc). 以疏水性药物阿霉素(DOX)为模型药物, 研究了两亲性接枝共聚物的化学组成对药物的扩散释放以及降解释放行为的影响.     

Synthesis and characterization of poly(L-lactide-co-ε- caprolactone) copolymers: influence of sequential monomer addition on chain microstructure

A series of copolymers with various compositions were synthesized by one-step and two-step bulk ring-opening polymerizations of L -lactide (LA) and ε-caprolactone (CL) using stannous octoate [Sn(Oct)₂] and 1-hexanol as the initiating system. For the sequential two-step polymerization, a poly(ε-caprolactone) (PCL) prepolymer was polymerized first to a percent conversion of approximately 70% and LA then added in order to produce a copolymer with a chain microstructure different from that obtained from the corresponding one-step reaction. The resulting copolymers were characterized using a combination of nuclear magnetic resonance spectroscopy (¹H- and ¹³C-NMR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and gel permeation chromatography (GPC). The average sequence lengths of the lactidyl ( ) and caproyl ( ) units, the degree of randomness (R) and the transesterification coefficient (T_(II)) were calculated from the ¹³C-NMR spectra. The appearance of a signal due to CapLCap sequences was directly attributable to transesterification of lactidyl (LL) units. It was found that both and values from the two-step syntheses were significantly longer than from the corresponding one-step syntheses, leading to different semi-crystalline morphologies and chain microstructures. The copolymers all showed at least some blocky chain structure as a result of the significant difference in monomer reactivity (LA > CL) between LA and CL. Thermal properties including stability depended on both composition and chain microstructure which could be controlled by the method of synthesis. From their DSC curves, the two-step copolymers were seen to be semi-crystalline whereas the one-step copolymers were mainly amorphous. A more blocky microstructure, as obtained from the two-step method, appeared to result in a lower thermal stability. Copyright © 2007 John Wiley & Sons, Ltd.     

聚[碳酸(亚丁酯-co-ε-己内酯)酯]的制备及其载药微球性能的研究

采用阴离子配位聚合方法, 合成了二氧化碳、1,2-环氧丁烷与ε-己内酯的三元共聚物: 聚[碳酸(亚丁酯-co-ε-己内酯)酯](PBCL). 并采用复相乳液(W/O/W)溶剂挥发法制备了包裹抗菌药物甲磺酸帕珠沙星的可降解微球. 对聚合物进行了FTIR, ¹H NMR, ¹³C NMR, DSC, TGA和WAXD等表征, 以及降解性能和载药微球特性的研究. 结果表明, PBCL热稳定性及降解性能优于聚碳酸亚丁酯(PBC). 所得PBCL微球球形规整、表面光滑. 大部分微球粒径在0.5～1 μm的范围内, 载药量和包封率分别达到38.21%和87.9%. 微球的体外释药性能研究在pH 7.4的磷酸缓冲溶液中进行, 释放21 d后, PBCL微球的累积释药量为84.74%, PBC微球的释药量仅为17.29%. 药物的体外释放行为符合Higuchi方程. PBCL载药微球具有长效缓释作用.     

Preparation,Characterization and Drug Release Behavior of 5-Fluorouracil Loaded Carboxylic Poly(ε-caprolactone) Nanoparticles

In this paper, 5-Fluorouracil (5-FU) loaded carboxylic poly(ε-caprolactone) nanoparticles have been prepared by emulsification/solvent evaporation o/w method, and the drug release behaviors of 5-FU were investigated. The novel carboxylic poly (ε-caprolactone) (P(CL-OPD)-mal) was synthesized via conjugation of maleic anhydride to sodium borohydride (NaBH₄) reduced poly(ε-caprolactone-co -4- carbonyl -ε-caprolactone) (P(CL-OPD)), while P(CL-OPD) was synthesized in bulk by ring-opening polymerization of ε-caprolactone and 4-carbonyl-ε-caprolactone (OPD) with stannous octoate as a catalyst. Their structures were confirmed by ¹HNMR, FT-IR and GPC. Dynamic light scattering (DLS), transmission electron microscopy (TEM), zeta potential measurements were used for nanoparticle characterization. TEM and DLS showed the nanoparticles were with spherical shape and uniform size distribution (mean diameter 70～100 nm), respectively. Zeta potential analysis revealed that the nanoparticles had an increased negative surface with the increase of carboxyl group concentration. UV spectroscopy was adopted to study the entrapment and release behaviour. The maximum 5-FU loading efficiency was 14.39% with the entrapment efficiency be 42%. In vitro release studies were performed in PBS at 37°C. Results of the study showed that the release behavior can be well-controlled, and the balanced release was up to 96 h. P(CL-OPD)-mal nanoparticles would provide increased benefit in biomedical and pharmaceutical applications.     

General auxiliary problem and algorithm for a generalized multi-valued variational-like inequality problem in reflexive Banach spaces

In this article, some generalized multi-valued variational-like inequality problems and their related general auxiliary problems in real reflexive Banach spaces are introduced. An existence theorem for one of the general auxiliary problems is proved. Furthermore, by exploiting this theorem, an algorithm for the corresponding generalized multi-valued variational-like inequality problem is constructed. The theorems of this article generalize, improve and unify many known corresponding results.