The volume and compressibility change for the formation of transition metal sulfate ion pairs at 25°C

The apparent molal volume and adiabatic compressibilities of some transition metal (Mn²⁺, Co²⁺ Ni²⁺, Cu²⁺, Zn²⁺, and Cd²⁺) sulfates have been determined at 25°C. Values of to 11.4 cm³-mole^–1 and to 31.3 × 10^–4cm³-mole^–1-bar^–1 at 1 atm were found for the formation of the transition metal sulfate ion pairs. These results are in good agreement with the values obtained from the high-pressure conductance measurements of Fisher et al., Shimizu et al., and Taniguchi et al. The volume and compressibility data indicate that 3.1±0.7 water molecules are lost when transition metals form ion pairs with SO ₄ ^2– . The fractions of inner-sphere ion pairs (20%) estimated in this study are in good agreement with the values obtained from ultrasonic measurements.     

Synthesis, nuclear, and magnetic structures and magnetic properties of [Mn3(OH)2(SO4)2(H2O)2

[Mn(3)(OH)(2)(SO(4))(2)(H(2)O)(2)] and its deuterated analogue were synthesized by a hydrothermal technique and characterized by differential thermal analysis, thermogravimetric analysis, and IR spectroscopy. Its nuclear structure, determined by single-crystal X-ray analysis and Rietveld analysis of neutron powder-diffraction data, consists of a 3D network of chains of edge-sharing Mn(1)O(6), running along the c axis, connected by the apices of Mn(2)O(6) and SO(4) units. It is isostructural to the nickel analogue. Determination of the magnetic structure and measurements of magnetization and heat capacity indicate the coexistence of both magnetic long-range ordering (LRO) and short-range ordering (SRO) below a Néel temperature of 26 K, while the SRO is retained at higher temperatures. The moments of the two independent Mn atoms lie in the bc plane, and that of Mn(1) rotates continuously by 54 degrees towards the c axis on decreasing the temperature from 25 to 1.4 K. While the SRO may be associated with frustration of the moments within a Mn(3) trimer, the LRO is achieved by antiparallel alignment of the four symmetry-related trimers within the magnetic unit cell. A spin-flop field, measured by dc and ac magnetization on a SQUID, is observed at 15 kOe.     

Chemical bond in alkali metal sulfates

In the context of the density functional theory of the local electron density the valence and differential density distribution in crystalline sulfates of M₂SO₄ (M is Li, Rb, and Cs) and double sulfates of MLiSO₄ were calculated using the pseudopotential method in the basis set of numerical atomic pseudo-orbitals. It is shown that in lithium sulfate crystallographically inequivalent oxygen atoms are in different charge states and have a different force of chemical bonding with sulfur. Anions are bonded to each other through lithium atoms that form tetrahedral complexes with oxygen. In rubidium sulfates the electron clouds of the anions overlap and chain structures form. Chemical bonding between the anion and the cation has an ionic nature. These features of the electron structure manifest themselves in double sulfates, where LiO₄ complexes that link the anionic chains also form, and heavy metals serve as cations.     

Characterization and quantitation of mixtures of alkyl ether sulfates and carboxylic acids by capillary electrophoresis with indirect photometric detection

The separation, characterization, and determination of mixtures of alkyl ether sulfates (AES) and fatty acids (C10-C16) in background electrolytes (BGEs) containing acetonitrile (ACN)-water mixtures is addressed. Due to inhibition of the ionization of the carboxylate groups, the migration time and the resolution between the fatty acids decreased when the water content of the BGE was reduced, but efficiency and resolution between the AES oligomers improved. The migration times increased and resolution improved by substituting 5% ACN by an equivalent amount of dioxane. A complete separation of the two surfactant classes, up to the AES oligomers with 8 ethylene oxide units (EOs) with respect to C10, with excellent resolution between the AES oligomers, while preserving a satisfactory resolution between the fatty acids, was achieved with a BGE containing 5 mM trimethoxybenzoic acid, 7 mM dipentylamine, 85% ACN, 5% dioxane, and 10% water. The two surfactant classes were increasingly resolved by further reducing the water content of the BGE. Thus, C2 (acetate) was resolved from the AES oligomers up to 7 EOs using 90% ACN and 5% dioxane, but the resolution between the heavier fatty acids was poor with this BGE. Identification of the AES oligomers was eased by the excellent regularity of the successive migration times; thus, within each AES subclass or series of oligomers with the same number of carbon atoms in the alkyl chain, the migration times decreased following a mild curve as the number of EOs increased. The way how the data obtained by indirect photometry (corrected peak areas that are proportional to the molar concentrations) should be managed to avoid systematic error when the calibration curve is constructed using an AES standard with an oligomer distribution different from that of the samples is discussed and equations are given. Decyl sulfate was successfully used as internal standard. The detection limits (S/N = 3) were of ca. 2 microM for individual AES oligomers.     

[H2en]2{La2M(SO4)6(H2O)2} (M=Co, Ni): First organically templated 3d-4f mixed metal sulfates

The first organically templated 3d-4f mixed metal sulfates, [H₂en]₂{La₂M(SO₄)₆(H₂O)₂} (M=Co 1, Ni 2) have been synthesized and structurally determined from non-merohedrally twinned crystals. The two compounds are isostructural and their structures feature a three-dimensional anionic network formed by the lanthanum(III) and nickel(II) ions bridged by sulfate anions. The La(III) ions in both compounds are 10-coordinated by four sulfate anions in bidentate chelating fashion, and two sulfate anions in a unidentate fashion. The transition metal(II) ion is octahedrally coordinated by six oxygens from four sulfate anions and two aqua ligands. The doubly protonated enthylenediamine cations are located at the tunnels formed by 8-membered rings (four La and four sulfate anions).     

Sulfonation of arylamines: Part 12. Kinetics of thermal decomposition of dimethylanilinium sulfates

Three dimethylanilinium sulfates (DMAS) have been prepared and characterised by elemental and spectral studies. Thermal decomposition of these salts has been studied by TG and simultaneous TG-DTG technique and kinetic parameters were evaluated from both dynamic and isothermal TG data using mechanism based kinetic equations. The thermal decomposition pathways have also been suggested and it has been found that DMAS salts give dimethyl aminobenzenesulfonic acids (DMABSA) via solid state reaction. The primary step in the thermal decomposition involves proton transfer followed by sulfonation.This revised version was published online in November 2005 with corrections to the Cover Date.     

高温~1H NMR鉴别8种海参硫酸软骨素

提取了8种海参中的粗多糖,经DEAE-52阴离子交换柱分离纯化得到其中的海参硫酸软骨素(SC-CHS),除日本刺参CHS外其余均为首次获得的海参多糖。对获得的SC-CHS进行分子量、单糖组成及硫酸基含量等基本性质分析后,利用高温1HNMR对SC-CHS结构进行初步鉴别。结果表明,高温条件下SC-CHS的1HNMR图谱具有较好的分辨度。对其支链硫酸化岩藻糖的异头氢进行归属和比较,并以此为指标鉴别不同种类海参硫酸软骨素的结构差异,建立了一种以海参硫酸软骨素结构特征为指标的海参指纹图谱;初步探讨了不同海域生长的海参中硫酸软骨素支链岩藻糖硫酸基的特点,比较发现:寒带海域海参的硫酸软骨素岩藻糖上硫酸基取代以2,4-di OSO3、3,4-di OSO3双取代为主,含部分4-OSO3单取代;温带海域海参以2,4-di OSO3双取代为主,含部分4-OSO3单硫酸基取代;热带亚热带海域海参以2,4-di OSO3双取代和4-OSO单取代为主。这将为海参构效关系的进一步分析鉴定提供理论依据。     

新型三维开放骨架稀土硫酸盐[Ln4(H2O)4(SO4)10](C4N2H12)4(H2O)4(Ln=Gd,Eu)的合成、结构及荧光性质

以哌嗪为模板剂,在水-乙醇混合溶剂体系中溶剂热合成了两个具有三维开放骨架结构的稀土硫酸盐[Ln4(H2O)4(SO4)10](C4N2H12)4(H2O)4（Ln = Gd,化合物1和Eu,化合物2）,并对其进行了结构表征、热重以及荧光光谱分析. 单晶结构解析表明,化合物1和2属于同构异质,均结晶于单斜晶系,P21/c空间群,化合物1,a = 19.691(3) ?,b = 19.249(3) ?,c = 13.186(2) ?,β = 92.33(0)o,V = 4993.5(1) ?3, Z =4. 化合物2,a = 19.7233(8) ?,b = 19.2791(8) ?,c = 13.2095(5) ?,β = 92.329(1)o,V = 5018.7(3) ?3, Z =4. 两个化合物在ab平面上由SO4,GdO8和GdO9多面体共边或共角交错连接形成含有八元环和十六元环的二维层状结构,该二维层沿c方向平行排列,相邻层通过SO4四面体相连形成具有孔道的三维开放骨架结构,其孔道之中包含平衡骨架负电荷的质子化哌嗪分子. 化合物2的固体荧光光谱分析显示其在397nm激发波长下,表现出典型的Eu3+发光性质.