电流密度对钙磷沉积层组成和结构的影响(英文)

用X射线衍射、激光拉曼光谱以及等离子体原子发射光谱等技术研究了电化学沉积钙磷陶瓷过程中 ,电流密度对电沉积层组成和结构的影响 .实验表明阴极表面得到的沉积物是几种钙磷盐组成的混合物 ,且其成份随电流密度的改变而发生较大的变化 .在电解液温度为 75℃条件下 ,当控制电流密度较低时 ,沉积层主要由CaHPO4· 2H2 O (DCPD)和Ca8H2 (PO4) 6· 5H2 O (OCP)组成 ;随着电流密度的增加 ,阴极表面逐渐生成Ca3 (PO4) 2 ·nH2 O (TCP)和Ca10 (PO4) 6(OH) 2 (HAP) .当电流密度大于 5mA/cm2 时 ,电沉积层的主要成份为羟基磷灰石 (HAP) .     

桑蚕丝素蛋白初始结构对其矿化作用的影响

以碱金属离子诱导桑蚕丝素蛋白溶液发生构象转变, 研究了蛋白质初始结构对其矿化作用的影响. FT-IR, XRD和SEM等测试结果显示, 未经任何处理的桑蚕丝素蛋白溶液矿化后形成片状复合物, 其无机相以二水磷酸氢钙(DCPD)为主; 而经过K^＋和Na^＋金属离子处理后, 桑蚕丝素溶液的结构由无规线团/螺旋构象向β-折叠发生转变, 矿化后成纤维状, 并相互结合呈现纳米级的三维多孔结构, 其无机相以热力学稳定的羟基磷灰石(HA)为主. 可以认为, 丝素蛋白结构转化为较伸展的β-折叠后, 使得更多的亲水基团暴露在外面, 在丝素蛋白分子不断凝聚成纤过程中, HA结晶快速生长并附着在这些微纤上, 最终形成纤维状的丝素蛋白/HA复合物. 该结果为阐明蛋白质的生物矿化过程及其调控机理提供了理论依据, 同时可以从矿化复合物的形成来反映这些微量元素可能对骨组织形成的影响, 为临床骨组织的修复提供一定的参考.     

Hydroxyapatite-poly(d,l-lactide) Nanografts. Synthesis and Characterization as Bone Cement Additives

This paper reports the creation of hydroxyapatite/polyester nanografts by “graft-from” polymerization of d,l-lactide with [Ca₅(OH)(PO₄)₃]₂ as the initiator and tin(II)-2-ethylhexanoate as the catalyst. Model polymerizations were performed with cyclooctanol as initiator to confirm the grafting on the surface of the hydroxyapatite nanocrystals. Polymers with the highest molecular mass (M_n) between 4250 Da (cyclooctanol) and 6100 Da (hydroxyapatite) were produced. In both cases the molecular mass distributions of the polymers formed were monomodal. The materials obtained were characterized by size-exclusion chromatography, NMR and FT-IR spectroscopy, and thermal methods. Their suitability as additives for commercial bone cement (Simplex P Speedset, Stryker Orthopaedics) has been confirmed by thermal analysis techniques and mechanical testing. The results obtained show that addition of the hydroxyapatite/ polyester nanografts improved both thermal and mechanical properties of the bone cement.     

Robust Superhydrophobic Brass Mesh with Electrodeposited Hydroxyapatite Coating for Versatile Applications

A robust superhydrophobic brass mesh was fabricated based on a low-energy surface and a roughness on the nano/micro-meter scale. It was carried out by the forming of hydroxyapatite (HP) coatings on its surface through a constant current electro-deposition process, followed by immersion in fluoroalkylsilane solution. Surface morphology, composition and wetting behavior were investigated by field-emission scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), high speed camera, and contact angle goniometer. Under optimal conditions, the resulting brass mesh exhibited superhydrophobicity, excellent anti-corrosion (η = 91.2%), and anti-scaling properties. While the surfactant liquid droplets of tetradecyl trimethyl ammonium bromide (TTAB) with different concentration were dropped on the superhydrophobic surface, maximum droplet rebounding heights and different contact angles (CAs) were observed and measured from side-view imaging. The plots of surfactant-concentration−maximum bounding height/CA were constructed to determine its critical-micelle-concentration (CMC) value. Close CMC results of 1.91 and 2.32 mM based on the determination of maximum rebounding height and CAs were obtained. Compared with its theoretical value of 2.1 mM, the relative errors are 9% and 10%, respectively. This indicated that the novel application based on the maximum rebounding height could be an alternative approach for the CMC determination of other surfactants.     

Antimicrobial Effect and Cytotoxic Evaluation of Mg-Doped Hydroxyapatite Functionalized with Au-Nano Rods

Hydroxyapatite (HA) is the main inorganic mineral that constitutes bone matrix and represents the most used biomaterial for bone regeneration. Over the years, it has been demonstrated that HA exhibits good biocompatibility, osteoconductivity, and osteoinductivity both in vitro and in vivo, and can be prepared by synthetic and natural sources via easy fabrication strategies. However, its low antibacterial property and its fragile nature restricts its usage for bone graft applications. In this study we functionalized a MgHA scaffold with gold nanorods (AuNRs) and evaluated its antibacterial effect against S. aureus and E. coli in both suspension and adhesion and its cytotoxicity over time (1 to 24 days). Results show that the AuNRs nano-functionalization improves the antibacterial activity with 100% bacterial reduction after 24 h. The toxicity study, however, indicates a 4.38-fold cell number decrease at 24 days. Although further optimization on nano-functionalization process are needed for cytotoxicity, these data indicated that Au-NRs nano-functionalization is a very promising method for improving the antibacterial properties of HA.     

明胶/羟基磷灰石复合物微球中明胶对无机相影响的研究

在油包水的乳液体系中,通过原位合成的方法使羟基磷灰石(HAP)在明胶链上化学沉积,改变明胶溶液的浓度,制得了一系列的明胶/HAP复合物微球.采用X射线衍射仪(XRD)、傅里叶变换红外光谱仪(FTIR)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和热失重分析仪(TGA)等对产物的组成、形貌以及热失重情况进行了表征.结果表明,明胶用量对复合物微球中HAP的形成具有重要影响.在明胶溶液浓度为0.025 g/mL时,明胶分子链提供的结合位点恰好与溶液中游离的Ca²⁺、PO₄^3-等离子达到平衡状态,复合物微球中无机相含量达40%,这是明胶与HAP以化学键合的形式结合所能得到的最大值.     

Raman Spectroscopy Investigation of Nano Hydroxyapatite Doped with Yttrium and Fluoride Ions

In this study, nano hydroxyapatite doped with yttrium (2.5, 5, and 7.5 mol%) and fluoride (2.5 mol%) ions were synthesized by precipitation method and sintered at 900°C, 1100°C, and 1300°C. Raman spectroscopy was applied to track the structural modifications in pure and doped hydroxyapatites. The results showed that the main characteristic band of pure hydroxyapatite at 963 cm^?1 was not affected significantly by ion doping but exhibited higher intensity with increasing sintering temperature. Due to fluoride substitution, the 1048 and 1034 cm^?1 bands of pure hydroxyapatites appeared with a wavenumber shift in the spectra of ion-doped hydroxyapatites. The 333 cm^?1 band of pure hydroxyapatite disappeared and an additional calcium–fluor bond at 322 cm^?1 was observable in ion-doped hydroxyapatites. Two fluorescence bands at 770 and 697 cm^?1, which were also observed in the spectra of pure hydroxyapatites, shifted to higher wavenumbers in the spectra of ion-doped hydroxyapatites. This was considered to result from the perturbation in the hexagonal structure of hydroxyapatite due to yttrium and fluoride codoping.     

Bioactive materials for bone regeneration based on zinc-modified hydroxyapatite

1. Download : Download high-res image (167KB)
2. Download : Download full-size image

     

Preparation and Characterization of Isotactic Polypropylene Reinforced with Hydroxyapatite Nanorods

Isotactic polypropylene (PP) composites filled with hydroxyapatite nanorods (nHAs) were fabricated using a melt compounding process. The effects of nHA additions on the structure, thermal, and mechanical properties as well as bioactivity of PP were investigated. Wide-angle X-ray diffraction and differential scanning calorimetry results showed that PP crystallized exclusively in the α-form when adding nHAs. Dynamic mechanical analysis showed that nHAs enhanced the storage modulus of PP. Mechanical measurements showed that nHAs stiffened and reinforced PP but reduced its tensile ductility and impact strength considerably. Furthermore, the PP/nHA nanocomposites were found to exhibit excellent bioactivity upon immersion in a simulated body fluid solution. This was attributed to the formation of apatite mineral crystals on the nanocomposite surfaces as revealed by scanning electron microscopy and energy dispersive X-ray analysis.