光强一定时饱和光电流随入射光频率的变化关系辨析

对光电效应实验中饱和光电流随入射光频率变化关系的几种谬误进行了辨析，给出了光强一定时饱和光电流随入射光频率变化的正确规律并作了解释。     

Host-guest complexation effect of 2,3,6-tri-O-methyl-β-cyclodextrin on a C60-porphyrin light-to-photocurrent conversion system

In a light-to-photocurrent conversion system based on a C₆₀-porphyrin bilayer prepared by electrostatic alternate adsorption, porphyrin units in a porphyrin polymer have been isolated by cyclodextrin utilizing the host-guest interaction. In this system, a high quantum yield was achieved by suppression of self-quenching of porphyrin units.     

6AZO-CONTAINING SELF-ASSEMBLY ULTRA-THIN FILMS AND THEIR PHOTOVOLTAIC PROPERTIES

A kind of azo-containing resin (Azo-R) was synthesized by a simple way through the coupling reaction of 2-nitro-N-methyldiphenylamine-4-diazoresin (NDR) with phenol, and a new covalentely attached multilayer film from Azo-R as H-donor and photosensitive diazoresin, diphenylamine-4-diazoresin (DR) as H-acceptor via H-bonding attraction by selfassembly technique has been fabricated. Following the decomposition of diazonium group of DR under exposure to UV light, the H-bonds between the layers of the film convert to covalent bonds and the film becomes very stable toward polar solvents or electrolyte aqueous solutions. Thus the UV-irradiated azo-containing films can be used to measure photocurrent in a conventional three-electrode photoelectrochemical cell using KCl as supporting electrolyte. It was confirmed that the azo-containing multilayer film is responsible for the photocurrent generation.     

Photocurrent generation in multilayer self-assembly films fabricated from water-soluble poly(phenylene vinylene)

A novel, water-soluble, cationic PPV derivative poly[(2,5-bis(3-bromotrimethylammoniopropoxy)-phenylene-1,4-divinylene)-alt-1,4-(2,5-bis(2-(2-hydroxyethoxy)ethoxy))phenylene vinylene] (BH-PPV) has been synthesized by a Heck coupling reaction. Multilayered assemblies of the BH-PPV and the sodium salt of hexa(sulfobutyl)fullerenes (C(60)-HS) were fabricated successfully by an alternate deposition technique. The multilayer structures were studied by UV/Vis spectroscopy, small angle X-ray diffraction, and atomic force microscopy. The photoinduced charge transfer property of the self-assembled multilayer film was also measured by a three-electrode cell technique. A steady and rapid cathodic 5.5 microA cm(-2) photocurrent response was measured as the irradiation of the multilayer film was switched on and off. Importantly, the response of on/off cycling is prompt and reproducible. A possible mechanism for the electron-transfer process is proposed.     

Enhancement of Photocurrent Generation of a Novel Stilbazolium Dye Dimer in LB Monolayer Films

A novel dye dimer,bis-{[1-(N-hexadecyl-4-pyridinium)-2-(4-N,N-dimethylaminopheyl)] ethenyl} methane diiodide (C16BP) was synthesized,and the photoelectrochemistry of the dye Langmuir-Blodgett monolayer modified ITO electrode was investigated.For comparison,the photoelectrochemistry of the monomer (E)-N-hexadexyl-4-[2-(4-N,N-dimethylaminophenyl) ethenyl] pyridinium iodide (C16P) was also measured.The results show that the photocurrent generation property of the dimer is enhanced.The photocurrent generation quantum yield is 0.38% for C16BP,while that for C16P is 0.23%.     

A pH-Induced Reversible Conformational Switch Able to Control the Photocurrent Efficiency in a Peptide Supramolecular System

External stimuli are potent tools that Nature uses to control protein function and activity. For instance, during viral entry and exit, pH variations are known to trigger large protein conformational changes. In Nature, also the electron transfer (ET) properties of ET proteins are influenced by pH-induced conformational changes. In this work, a pH-controlled, reversible 3₁₀-helix to α-helix conversion (from acidic to highly basic pH values and vice versa) of a peptide supramolecular system built on a gold surface is described. The effect of pH on the ability of the peptide SAM to generate a photocurrent was investigated, with particular focus on the effect of the pH-induced conformational change on photocurrent efficiency. The films were characterized by electrochemical and spectroscopic techniques, and were found to be very stable over time, also in contact with a solution. They were also able to generate current under illumination, with an efficiency that is the highest recorded so far with biomolecular systems.     

Dynamics of excitons and carriers at the NPB/C60 interface by transient photocurrents

The transient photocurrent (TPC) technique was performed to explore the dynamics of excitons and carriers at organic active layer/buffer layer interfaces. A special device with ITO/PEIE/NPB/C₆₀/Al structure was designed to study the interfacial processes at the NPB/C₆₀ interface. An external electrical field was provided to neutralize the built-in electrical field of the device. Interestingly, a new phenomenon was observed, wherein the polarity of the TPC changed from negative to positive under an external electrical field. The initial negative signal was ascribed to exciton separation by the built-in field in C₆₀, and the subsequent positive signal can be attributed to the diffusion of electrons that accumulate at the NPB/C₆₀ interface. TPC measurements shown that further increasing the external electrical field causes polarity to change twice. Analyzing the two changes in polarity revealed that the NPB did not only extract holes from C₆₀ but also provided an effective interface for exciton dissociation.     

Multiple plasmonic effect on photocurrent generation of metal‐loaded titanium dioxide composite/dye films on gold grating surface

We demonstrate the multiple plasmonic effect on the photocurrent properties of photoanodes containing Ag or Au nanoparticles (NPs) loaded onto titanium dioxide film (Ag–TiO₂ or Au–TiO₂) on Au grating surfaces. Ag–TiO₂ or Au–TiO₂ nanocomposite particles are prepared by a flame spray pyrolysis route. The structures and morphologies of the prepared products are characterized by high‐resolution transmission electron microscopy. The Ag–TiO₂ or Au–TiO₂ composite NPs are deposited by spin coating onto the Au grating surfaces. The photoanode electrode is a layered structure of blu‐ray disc‐recordable grating substrate/Au/Ag (or Au)–TiO₂/dye/electrolyte/indium‐tin oxide. The plasmonic effect is induced when Ag or Au NPs are located within the propagating surface plasmon (SP) field on the Au grating surface. The short‐circuit photocurrent is increased by exciting the grating‐coupled propagating SP on the Au gratings and is further enhanced by positioning the Ag or Au NPs within the grating‐coupled SP field. Copyright © 2014 John Wiley & Sons, Ltd.     

Laser-beam-induced current in two-dimensional <Emphasis Type="Italic">n-p-n</Emphasis>-structures

Appearance of a transverse photocurrent at local excitation, by an optical beam, of the surface of n-p-n-structure realized on the basis of a two-dimensional electron gas is studied theoretically. It is shown that the magnitude and sign of the photocurrent depend on the coordinate of the center of light spot. Conditions of linearity of this dependence are found demonstrating the suitability of two-dimensional bipolar structures for use in position-sensitive detectors with high spatial resolution.     

Charge carrier decay and diffusion in organic–inorganic CH3NH3PbI3–xClx perovskite based solar cell

In recent years, organic–inorganic lead halides attracted widespread interest, mainly due to their impressive photoconversion properties and low‐cost solution processing. In this study, we employed small amplitude transient photovoltage and photocurrent spectroscopy to investigate charge transport and recombination properties of perovskite CH₃NH₃PbI_3–xCl_x solar cell under realistic light harvesting conditions (<1 sun). Cell structure resembles outlay commonly found in organic photovoltaics, with perovskite absorber being sandwiched between two thin layers of organic polymers. Tested device displayed high power conversion efficiency (10.3%), good fill factor and negligible hysteresis effect. Fundamental device parameters were characterized at various open‐circuit voltages (V_oc) by examination of small voltage and current perturbations created by the low intensity pulsed laser excitations. The obtained results exhibit long charge carrier lifetimes and fast charge transport over the full range of applied optical bias, as well as remarkable diffusion lengths exceeding 1 μm. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)