多壁碳纳米管膜湿敏特性的研究

研究了多壁碳纳米管(MWNTs)薄膜的湿敏特性，实验所用的多壁碳纳米管是用热灯丝化学气相沉积法(CVD)合成的.分别对未修饰和修饰的多壁碳纳米管膜温度和湿度特性进行研究后发现，修饰的多壁碳纳米管对温度和湿度非常敏感，且对湿度的响应时间和恢复时间短，重复性好.而未修饰的多壁碳纳米管对温度和湿度不太敏感.对修饰多壁碳纳米管的湿敏特性进行了理论分析，给出了其理论表示式. 关键词： 多壁碳纳米管 化学修饰 湿敏特性 物理吸附     

Relative stability of the2 A 1g and2 E g states of the C2H 6 + ion

Anab initio study of the relative stability for the states² A _1g and² E _g of C₂H ₆ ⁺ has been carried out. The results of the Open Shell Restricted Hartree-Fock calculations lead to assign the² A _{1 g} as the ground state of the molecule in agreement with previous SCF calculations.The correlation energy associated to both states has been calculated within the correlation hole model and the results, contrary to those obtained from Configuration Interaction calculations, do not alter qualitatively the conclusions from SCF.     

铜在3%NaCl溶液中腐蚀行为的光电化学研究

Cu以其优异的导电性、导热性和易加工性广泛用于工农业生产中．自然Cu的腐蚀和防腐成为人们很关注的问题．人们已经注意到，Cl-对Cu的腐蚀有影响，并进行过一些研究．但目前使用光电化学方法研究这一问题的文章尚不多见，特别是利用测量开路光电压及其瞬态波形这一现场的、无损的、灵敏的监测方法研究户对Cu电极腐蚀全过程的文章尚未见到．本文正是利用如上方法及XPS，AES方法，研究了Cl-对Cu电极腐蚀的全过程，取得了一些有意义的结果．1实验方法Cu电极用99．99％（质量分数）的Cu制成，面积约为39mm2；电极底部由Cu导线焊接引出，…     

Computation of Dispersion in Microstrip Line with Anisotropic Substrate and Overlay

This paper presents an analysis of frequency dependent propagation characteristics of microstrip lines with anisotropic substrate and overlay. The method involves setting up of the Greenph07t7085m3m/xxlarge8217.gif" alt="rsquo" align="BASELINE" BORDER="0">s functions corresponding to the structure and formulating a dispersion relation in Fourier transform domain. The dispersion relation is constructed in a Galerkinph07t7085m3m/xxlarge8217.gif" alt="rsquo" align="BASELINE" BORDER="0">s procedure. Numerical results are also presented.     

Effect of BaO on the crystallization kinetics of glasses along the Diopside-Ca-Tschermak join

We report on the effect of BaO on the crystallization kinetics of glasses in the diopside (CaMgSi₂O₆)-Ca-Tschermak (CaAl₂SiO₆) system. Partial substitution (i.e. 5%, 10% and 20%) of Ba²⁺ for Ca²⁺ was attempted in composition CaMg_0.8Al_0.4Si_1.8O₆, in three different glasses while partial substitution of B³⁺ for Al³⁺ was made in the fourth glass. Structural investigations on the glasses have been made by density measurements, molar volume and Infra-red spectroscopy (FTIR). Non-isothermal crystallization kinetic studies have been employed to study the mechanism of crystallization in all the four glasses. The Avrami parameter for the glass powders is ∼2, indicating the existence of intermediate mechanism of crystallization. Crystallization sequence in the glasses has been followed by X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM) and FTIR. Augite crystallized out being the dominant phase in all the glass-ceramics, while different polymorphs of BaAl₂Si₂O8 were present as secondary or minor phases.     

压电体超晶格中的新型极化激元

对压电体超晶格中电磁波的传播情况进行了研究，通过压电效应，压电体超晶格中的纵振动声波将引起横向电极化，这一极化会与某一特定波段的电磁波强烈耦合，从而出现通常离子晶体中所没有的新型极化激元，产生非布拉格反射引起的光学禁带。     

Ablation process of silica glass induced by laser plasma soft X-ray irradiation

Silica glass can be machined by irradiation with laser plasma soft X-rays on nano- and micrometer scale. We have investigated the ablation process of silica glass induced by laser plasma soft X-ray irradiation. We observed ionic and neutral species emitted from silica surfaces after irradiation. Dominant ions and neutrals are O⁺ and Si⁺ ions and Si, O, SiO and Si₂ neutrals, respectively. The ions have kinetic energies of 13 and 25 eV, which are much higher than those of particles emitted by evaporation. The energy of laser plasma soft X-rays absorbed to silica glass at a fluence of 1.4 J/cm² is estimated to be 380 kJ/cm³, which is higher than the binding energy of SiO₂ of 76 kJ/cm³. These results suggest that the most of the bonds in silica glass are broken by absorption of laser plasma soft X-rays, that several percent of the atoms are ionized, and that neutral atoms are emitted together with repulsive ions. The process possibly enables us to fabricate nano structures.     

对苯二酚改性聚二苯基硼硅氧烷的研究

应用熔融缩聚方法，用对苯二酚对硼硅氧烷聚合物进行改性，得到一种新型耐高温聚合物（ＰＢ）ＰＨ。并对其溶解性、热性能及其结构等作了详尽的论述。     

Germania nanocrystals in Modified Chemical Vapour Deposition

The Modified Chemical Vapour Deposition process for fabrication of silica-based optical fibres is used to generate nanoscale soot particles which are deposited on a substrate by thermophoresis and then sintered and collapsed into a preform from which optical fibre can be drawn. To increase the refractive index of the fibre core silica and germania soots are often generated together and co-deposited. The silica soot is invariably amorphous in character but for certain configurations of the preform lathe it has been found that germania soot particles may be crystalline. A systematic study has identified parameters controlling germania crystallinity in soot nanoparticles and transition from crystalline germania nanoparticles to glassy germania has been observed. The implications of possible retention of germania nanocrystals in preform and fibre are discussed with regard to fibre quality and optical performance.