Investigation of thin-film electroluminescent structures on rough subsrates

Results of experimental investigations of the volt-brightness characteristics, frequency dependences of brightness, and the directional radiation pattern of electroluminescent MSDM, MSCM, and MSDCM emitters, where M stands for the first transparent and second nontransparent electrodes, S is a semiconductor, D is a thin-film dielectric, and C is a silicone-based composite liquid dielectric with a powdered segnetoelectric filler, developed on conventional “smooth” and rough glass substrates are presented. It is shown that electroluminescent structures on rough surfaces have a brightness approximately two times higher than that of similar structures developed on a “smooth” substrate. Ul’yanovsk State University, 42, L. Tolstoi St., Ul’yanovsk, 432700, Russia. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 4, pp. 507–512, July–August, 1997.     

涂敷法制作质谱场电离发射丝的方法及性能研究

本文介绍一种新的质谱场电离发射丝的制备方法——涂敷法,并研究了其制备机理及影响发射丝灵敏度的因素。此外,还对涂敷法制作的发射丝及高温活化法制作的发射丝进行了各项性能对比试验。最后,介绍了涂敷发射丝的应用效果。     

Biparametric multicommutated flow analysis system for determination of human serum phosphoesterase activity

A multicommutated flow analysis (MCFA) system constructed of microsolenoid valves and pumps offering simultaneous determination of activity of acid phosphatase (ACP) and alkaline phosphatase (ALP) in human serum samples has been developed. The MCFA system is based on optoelectronic flow-through detector made of two light emitting diodes and operating according to paired emitter detector diode (PEDD) principle. This photometric PEDD device has been dedicated for detection of p-nitrophenol (NP) generated in the course of enzymatic hydrolysis of p-nitrophenyl phosphate and optimized for the determination of NP in human serum samples. The developed PEDD-based MCFA system allows independent optimization of conditions for reaction and detection steps of photometric ACP and ALP bioassays. Moreover, it allows elimination of photometric interferences from serum matrix components according to two-points kinetic mode of measurement. The single measurement cycle takes 12 min, consists of four measurements (two for each phosphoesterase) and enables determination of serum ACP and ALP activities at physiological and pathological levels. The real analytical utility of the developed MCFA system has been confirmed by analysis of control sera as well as real human serum samples from healthy persons and oncological patients.     

Metal‐Free Triplet Phosphors with High Emission Efficiency and High Tunability

Design of highly efficient phosphorescent emitters based on metal‐ and heavy atom‐free boron compounds has been demonstrated by taking advantage of the singlet fission process. The combination of a suitable molecular scaffold and appropriate electronic nature of the substituents has been utilized to tailor the phosphorescence emission properties in solution, neat solid, and in doped PMMA thin films.     

A new light emitting diode-light emitting diode portable carbon dioxide gas sensor based on an interchangeable membrane system for industrial applications

A new system for CO₂ measurement (0–100%) based on a paired emitter–detector diode arrangement as a colorimetric detection system is described. Two different configurations were tested: configuration 1 (an opposite side configuration) where a secondary inner-filter effect accounts for CO₂ sensitivity. This configuration involves the absorption of the phosphorescence emitted from a CO₂-insensitive luminophore by an acid–base indicator and configuration 2 wherein the membrane containing the luminophore is removed, simplifying the sensing membrane that now only contains the acid–base indicator. In addition, two different instrumental configurations have been studied, using a paired emitter–detector diode system, consisting of two LEDs wherein one is used as the light source (emitter) and the other is used in reverse bias mode as the light detector. The first configuration uses a green LED as emitter and a red LED as detector, whereas in the second case two identical red LEDs are used as emitter and detector. The system was characterised in terms of sensitivity, dynamic response, reproducibility, stability and temperature influence. We found that configuration 2 presented a better CO₂ response in terms of sensitivity.     

新型宽温区高热稳定性微波功率SiGe 异质结双极晶体管

宽温区大电流下的热不稳定性严重制约着功率SiGe 异质结双极晶体管 (HBT) 在射频和微波电路中的应用.为改善器件的热不稳定性, 本文利用SILVACO TCAD建立的多指功率SiGe HBT模型, 分析了器件纵向结构中基区Ge组分分布对微波功率SiGe HBT电学特性和热学特性的影响. 研究表明, 对于基区Ge组分为阶梯分布的HBT, 由于Ge组分缓变引入了少子加速电场, 使它与均匀基区Ge组分HBT相比, 具有更高的特征频率f_T, 且电流增益β和f_T随温度变化变弱, 这有利于防止器件在宽温区工作时电学特性的漂移.同时, 器件整体温度有所降低, 但器件各指温度分布均匀性较差.考虑多指HBT各发射极指散热能力存在差异, 在器件纵向结构设计为基区Ge组分阶梯分布的同时, 对其横向版图进行发射极指间距渐变结构设计, 用于改善器件各指温度分布的均匀性, 进而提高HBT的热稳定性.结果表明, 与基区Ge组分为均匀分布的等发射极指间距结构HBT相比, 新器件各指温度分布均匀性明显改善, f_T保持了较高的值, 且β和f_T 随温度变化不敏感, 热不稳定性得到显著改善, 显示了新器件在宽温区大电流下工作的优越性. 关键词： SiGe 异质结双极晶体管 Ge组分分布 发射极指间距渐变技术 热稳定性     

基于空域非均匀傅里叶变换的傅里叶望远镜

为了在稀疏发射阵列下清晰重构目标图像,提出了一种基于空域非均匀傅里叶变换(NDFT)的傅里叶望远镜信号处理方法。依据傅里叶望远镜的发射器位置与抽取的目标空间频率关系,结合MATLAB程序特点,完成了空域非均匀傅里叶逆变换,重构了目标图像。稀疏发射阵列配置方式为:T型阵列单臂放置11个发射望远镜,连续抽取目标的8个低频信息,再抽取3个高频分量。选择不同形状和灰度分布的4个卫星作为成像目标。与补零均匀快速傅里叶变换(FFT)方法重构的图像对比发现:信噪比为100 dB时,相比补零均匀FFT方法, NDFT方法重构图像的Strehl比都有所提升,最高提升了0.159 8。     

Light‐induced degradation of PECVD aluminium oxide passivated silicon solar cells

Light‐induced degradation (LID) has been identified to be a critical issue for solar cells processed on boron‐doped silicon substrates. Typically, Czochralski‐grown silicon (Cz‐Si) has been reported to suffer from stronger LID than block‐cast multicrystalline silicon (mc‐Si) due to higher oxygen concentrations. This work investigates LID under conditions practically relevant under module operation on different cell types. It is shown that aluminium oxide (AlOx) passivated mc‐Si solar cells degrade more than a reference aluminium back surface field mc‐Si cell and, remarkably, an AlOx passivated Cz‐Si solar cell. The defect which is activated by illumination is shown to be doubtful a sole bulk effect while the AlOx passivation might play a certain role. This work may contribute to a re‐evaluation of the suitability of boron‐doped Cz‐ and mc‐Si for solar cells with very high efficiencies. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Acceleration and mitigation of carrier‐induced degradation in p‐type multi‐crystalline silicon

Recently, a new carrier‐induced defect has been reported in multi‐crystalline silicon (mc‐Si), and has been shown to be particularly detrimental to the performance of passivated emitter and rear contact (PERC) cells. Under normal conditions, this defect can take years to fully form. This Letter reports on the accelerated formation and subsequent passivation of this carrier‐induced defect through the use of high illumination intensity and elevated temperatures resulting in passivation within minutes. The process was tested on industrial mc‐Si PERC solar cells, where degradation after a 100 hour stability test was suppressed to only 0.1% absolute compared to 2.1% for non‐treated cells. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

热活化延迟荧光蓝光小分子取代基效应的研究进展

近年来,作为第三代有机发光二极管(organic light-emitting diodes, OLED)发光材料的热活化延迟荧光(thermally activated delayed fluorescence, TADF)材料受到了学术界和产业界的广泛关注. TADF分子由于其单线态与三线态之间的能级差较小,三线态激子可以被环境热活化而通过反系间窜越上转换至单线态,理论上可实现100%的激子利用率,从而使得OLED器件外量子效率显著提高.TADF材料被认为是突破高效稳定有机电致蓝光发射瓶颈的潜在解决方案.一般, TADF分子为含有电子给体(donor, D)和电子受体(acceptor, A)的纯有机推拉电子体系.通过改变给体单元和受体单元的结构、数量和取代基及其位置可以有效调节TADF分子的单线态-三线态能级差、前线轨道分布、聚集态结构、电致发光颜色及其性能.同时取代基在调控给、受体单元的推拉电子能力及TADF材料的分子构型、聚集态结构和稳定性等物化特性方面扮演着非常重要的角色.本综述分别对D-A型和多重共振型TADF蓝光分子的取代基效应进行了综述,以期为高效稳定的蓝光TADF分...