Facile Synthesis of Ultra-Small Few-Layer Nanostructured MoSe2 Embedded on N,P Co-Doped Bio-Carbon for High-Performance Half/Full Sodium-Ion and Potassium-Ion Batteries

Sodium/potassium-ion batteries (SIBs/PIBs) arouse intensive interest on account of the natural abundance of sodium/potassium resources, the competitive cost and appropriate redox potential. Nevertheless, the huge challenge for SIBs/PIBs lies in the scarcity of an anode material with high capacity and stable structure, which are capable of accommodating large-size ions during cycling. Furthermore, using sustainable natural biomass to fabricate electrodes for energy storage applications is a hot topic. Herein, an ultra-small few-layer nanostructured MoSe₂ embedded on N, P co-doped bio-carbon is reported, which is synthesized by using chlorella as the adsorbent and precursor. As a consequence, the MoSe₂/NP-C-2 composite represents exceedingly impressive electrochemical performance for both sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs). It displays a promising reversible capacity (523 mAh g⁻¹ at 100 mA g⁻¹ after 100 cycles) and impressive long-term cycling performance (192 mAh g⁻¹ at 5 A g⁻¹ even after 1000 cycles) in SIBs, which are some of the best properties of MoSe₂-based anode materials for SIBs to date. To further probe the great potential applications, full SIBs pairing the MoSe₂/NP-C-2 composite anode with a Na₃V₂(PO₄)₃ cathode also exhibits a satisfactory capacity of 215 mAh g⁻¹ at 500 mA g⁻¹ after 100 cycles. Moreover, it also delivers a decent reversible capacity of 131 mAh g⁻¹ at 1 A g⁻¹ even after 250 cycles for PIBs.     

Highly N/O co-doped ultramicroporous carbons derived from nonporous metal-organic framework for high performance supercapacitors

A new nonporous Zn-based metal-organic framework (NPMOF) synthesized from a high nitrogen-containing rigid ligand was converted into porous carbon materials by direct carbonization without adding additional carbon sources. A series of NPMOF-derived porous carbons with very high N/O contents (24.1% for NPMOF-700, 20.2% for NPMOF-800, 15.1% for NPMOF-900) were prepared by adjusting the pyrolysis temperatures. The NPMOF-800 fabricated electrode exhibits a high capacitance of 220 F/g and extremely large surface area normalized capacitance of 57.7 μF/cm² compared to other reported MOF-derived porous carbon electrodes, which could be attributed to the abundant ultramicroporosity and high N/O co-doping. More importantly, symmetric supercapacitor assembled with the MOF-derived carbon manifests prominent stability, i.e., 99.1% capacitance retention after 10,000 cycles at 1.0 A/g. This simple preparation of MOF-derived porous carbon materials not only finds an application direction for a variety of porous or even nonporous MOFs, but also opens a way for the production of porous carbon materials for superior energy storage.     

试验优化设计Er3+-Yb3+共掺杂Gd2Ti2O7上转换发光特性

采用溶胶-凝胶（Sol-gel）法制备了Er³⁺-Yb³⁺共掺杂Gd₂Ti₂O₇纳米晶粉末,通过试验优化设计的理论建立了Er³⁺-Yb³⁺掺杂浓度与发光强度的回归方程,利用遗传算法优化计算出方程的最优解Er³⁺、Yb³⁺掺杂浓度分别为5.60%（物质的量分数）和13.43%。Er³⁺-Yb³⁺共掺杂Gd₂Ti₂O₇纳米晶粉末为单一面心立方Gd₂Ti₂O₇相结构,随Yb³⁺共掺杂浓度增加,X射线衍射峰逐渐向高角偏移。在976 nm激光激发下,Er³⁺-Yb³⁺共掺杂Gd₂Ti₂O₇获得了分别对应于Er³⁺的²H_11/2/⁴S_3/2→⁴I_15/2和⁴F_9/2→⁴I_15/2跃迁的绿色和红色上转换发光,且绿色和红色发光均为双光子吸收过程。研究了最优样品上转换发光与温度之间的关系,发现绿色上转换发光具有优良的温度传感特性,对红色上转换发光的温度猝灭进行了解释。     

LiBa0.95-yBO3:0.05Tb3+,yBi3+荧光粉的制备及荧光性质

以硼酸和碳酸盐为原料,用高温固相法制备了可被（近）紫外光（369、254 nm）有效激发的Tb³⁺单掺杂LiBa_1-xBO₃：xTb³⁺（物质的量分数x=0.02、0.03、0.04、0.05、0.06、0.07）及Bi³⁺和Tb³⁺共掺杂LiBa_0.95-yBO₃：0.05Tb³⁺,yBi³⁺（物质的量分数y=0.02、0.03、0.04、0.05、0.06、0.07）的2个系列荧光粉,产物的结构和形貌分别用粉末X射线衍射（PXRD）和扫描电子显微镜进行表征。PXRD测定结果表明2个系列的产物均为纯相LiBaBO₃。通过对第一系列产物荧光光谱的测定,筛选出发光强度最好的产物,据此确定铽离子的最佳掺杂量;在此基础上制备出铋离子掺杂量不同的第二系列荧光粉。荧光光谱测定的实验结果表明,Tb³⁺/Bi³⁺共掺杂的荧光粉的发光强度好于Tb³⁺单掺杂的荧光粉,这说明Bi³⁺对Tb³⁺有敏化作用;而且随着Bi³⁺掺杂量的增加,产物的荧光强度表现出先增加后减小的趋势,当Bi³⁺的掺杂量y=0.03时,产物的荧光强度达到最大。Bi³⁺和Tb³⁺之间存在偶极-四极相互作用而进行能量传递。系列荧光粉的CIE坐标显示其发光颜色在一定程度上呈现出由绿色光到白光的渐变趋势。     

Ho3+/Yb3+共掺ZnO-Al2O3-GeO2-SiO2玻璃陶瓷的制备和上转换发光性质

综合ZnO-Al₂O₃-SiO₂系和锗酸盐玻璃陶瓷的优点,采用熔融-晶化法首次制备了Ho³⁺/Yb³⁺共掺以ZnAl₂O₄为主晶相的ZnO-Al₂O₃-GeO₂-SiO₂系玻璃陶瓷。因[GeO₄]四面体和[SiO₄]四面体都是玻璃网络形成体,讨论了GeO₂取代SiO₂对玻璃陶瓷样品硬度及发光性能的影响,最终确定GeO₂的取代量为10.55%（w/w）时,玻璃陶瓷综合性能最佳。在980 nm泵浦光的激发下,发现强的绿色（546 nm）和弱的红色（650 nm）上转换发光,并研究了不同Ho³⁺/Yb³⁺掺杂比对样品上转换发光的影响,最终结果表明当Ho³⁺/Yb³⁺掺杂比为1：11（n/n）时样品荧光强度最强,在绿色上转换发光材料方面具有潜在的应用。     

Enhanced room temperature ferromagnetism and photoluminescence behavior of Cu-doped ZnO co-doped with Mn

Cu, Mn co-doped ZnO nanoparticles were successfully synthesized by the sol–gel technique. XRD pattern described that Mn-doping did not affect the hexagonal wurtzite structure of the samples and no secondary phases were found. The reduced crystallite size at Mn=2% is due to the suppression of grain surface growth by foreign impurity. The enhancement of crystal size after Mn=2% is due to the expansion of lattice volume produced by the distortion around the dopant ion. The better dielectric constant and conductivity noticed at Mn=2% are explained by charge carrier density and crystallite size. The suppression of broad UV band by Mn-doping is discussed based on the generation of non-radiative recombination centers. Hysteresis loop showed the clear room temperature ferromagnetism in all the samples and the magnetization increased with Mn-doping. Better electrical and magnetic behavior of Zn_0.94Cu_0.04Mn_0.02O sample is suggested for effective opto-magnetic devices.     

Mg-N阴阳离子共掺杂SnO2的第一性原理研究

基于密度泛函理论,利用第一性原理计算Mg-N阴阳离子双受主共掺杂SnO₂的电子结构、电荷密度分布和缺陷形成能.Mg、N分别取代SnO₂晶体中的Sn和O,掺杂浓度分别为4.17at;、2.08at;,Mg-N键之间的共价性明显高于Sn-O键,富氧条件下,Mg-N共掺杂的缺陷形成能为2.67 eV,有利于进行有效的受主替代掺杂.Mg单受主掺杂SnO₂时,增加了带隙宽度,费米能级进入价带,Mg-N共掺杂SnO₂时,带隙窄化,表现出明显的p型导电类型.     

Mn2+、N2-共掺杂Zn2GeO4晶体电子结构和光学性质的研究

采用基于密度泛函理论的平面波超软赝势方法对本征Zn2GeO4,Mn2+掺杂Zn2GeO4,Mn2+/N2-共掺杂Zn2GeO4超晶胞进行了几何结构优化,计算了掺杂前后体系的晶格常数、能带结构、态密度和光学性质。结果表明,Mn离子掺入后,Mn离子3d轨道与O离子2p轨道之间有强烈的轨道杂化效应,掺杂系统不稳定,而Mn/N离子共掺后,Mn离子和N离子之间的吸引作用克服了Mn离子之间的排斥作用,能够明显地提高掺杂浓度和体系的稳定性。光学性质计算结果表明,Mn离子与N离子共掺杂能改善Zn2GeO4电子在低能区的光学跃迁特性,增强电子在可见光区的光学跃迁;吸收谱计算结果显示,Mn离子与N离子掺入后体系对低频电磁波吸收增加。     

The synergistic catalysis on Co nanoparticles and CoN_x sites of aniline-modified ZIF derived Co@NCs for oxidative esterification of HMF

An efficient sustainable and scalable strategy for the synthesis of porous cobalt/nitrogen co-doped carbons(Co@NCs) via pyrolysis of aniline-modified ZIFs,has been demonstrated.Aniline can coordinate and absorb on the surface of ZIF(ZIF-CoZn3-PhA),accelerate the precipitation of ZIFs,thus resulting in smaller ZIF particle size.Meanwhile,the aniline on the surface of ZIF-CoZn3-PhA promotes the formation of the protective carbon shell and smaller Co nanoparticles,and increases nitrogen content of the catalyst.Because of these prope rties of Co@NC-PhA-3,the oxidative esterification of 5-hydroxymethylfurfural can be carried out under ambient conditions.According to our experimental and computational results,a synergistic catalytic effect between CoN_x sites and Co nanoparticles has been established,in which both Co nanoparticles and CoN_x can activate O_2 while Co nanoparticles bind and oxidize HMF.Moreover,the formation and release of active oxygen species in CoN_x sites are reinfo rced by the electronic interaction between Co nanoparticles and CoN_x.     

硼、氮共掺杂多孔碳的制备及其超电容性能

分别以含氮菲咯啉、四硼酸钾和醋酸锌为碳源、活化剂和模板,制备了B、N共掺杂多孔碳(BN-PC),并探究模板质量对BN-PC结构和储电性能的影响。当醋酸锌质量为5g时,所得BN-PC₅中B、N杂原子含量分别为 20.21%、18.29%。电化学测试结果表明,以6 mol·L^-1 KOH为电解液,BN-PC₅电极展现出高的比电容(在0.05 A·g^-1电流密度下为255 F·g^-1)、优异的倍率性能(在20A·g^-1电流密度下为188F·g^-1)和卓越的循环稳定性(在5 A·g^-1的电流密度下循环10 000次比电容保持率为97%)。以3 mol·L^-1 ZnSO₄为电解液,在平均功率密度为56W·kg^-1时,BN-PC₅电容器的能量密度可达27Wh·kg^-1。