Well-posedness of two pseudo-parabolic problems for electrical conduction in heterogeneous media

We prove a well-posedness result for two pseudo-parabolic problems, which can be seen as two models for the same electrical conduction phenomenon in heterogeneous media, neglecting the magnetic field. One of the problems is the concentration limit of the other one, when the thickness of the dielectric inclusions goes to zero. The concentrated problem involves a transmission condition through interfaces, which is mediated by a suitable Laplace-Beltrami type equation.     

High temperature annealing effect on structural and magnetic properties of Ti/Ni multilayers

High temperature annealing effect on structural and magnetic properties of Ti/Ni multilayer (ML) up to 600 °C have been studied and reported in this paper. Ti/Ni multilayer samples having constant layer thicknesses of 50 Å each are deposited on float glass and Si(1 1 1) substrates using electron-beam evaporation technique under ultra-high vacuum (UHV) conditions at room temperatures. The micro-structural parameters and their evolution with temperature for as-deposited as well as annealed multilayer samples up to 600 °C in a step of 100 °C for 1 h are determined by using X-ray diffraction (XRD) and grazing incidence X-ray reflectivity techniques. The X-ray diffraction pattern recorded at 300 °C annealed multilayer sample shows interesting structural transformation (from crystalline to amorphous) because of the solid-state reaction (SSR) and subsequent re-crystallization at higher temperatures of annealing, particularly at ≥400 °C due to the formation of TiNi₃ and Ti₂Ni alloy phases. Sample quality and surface morphology are examined by using atomic force microscopy (AFM) technique for both as-deposited as well as annealed multilayer samples. In addition to this, a temperature dependent dc resistivity measurement is also used to study the structural transformation and subsequent alloy phase formation due to annealing treatment. The corresponding magnetization behavior of multilayer samples after each stage of annealing has been investigated by using Magneto-Optical Kerr Effect (MOKE) technique and results are interpreted in terms of observed micro-structural changes.     

SSIMS analysis of organics, polymer blends and interfaces

This paper gives a critical review on the applications of ToF SIMS in the areas of polymer additive characterization and in the study of polymer blends and interfaces. Polymer additives can readily be identified by ToF SIMS using their parent molecular ions or characteristic fragments. This analytical capability has been successfully applied to monitor the migration or segregation of additives during polymer processing. ToF SIMS is an ideal analytical tool for the study of polymer blends and interfaces because it is able to provide information on both surface composition and morphology. In combination with other analytical techniques such as AFM and XPS, ToF SIMS chemical imaging capability has opened up new horizons in the investigation of complex polymer blend systems. Finally the main advantages and limitations of ToF SIMS in these application areas are also discussed.     

Selective spatial localization of the atom displacements in one-dimensional hybrid quasi-regular (Thue-Morse and Rudin-Shapiro)/periodic structures

We have studied the vibrational frequencies and atom displacements of one-dimensional systems formed by combinations of Thue-Morse and Rudin-Shapiro quasi-regular stackings with periodic ones. The materials are described by nearest-neighbor force constants and the corresponding atom masses. These systems exhibit differences in the frequency spectrum as compared to the original simple quasi-regular generations and periodic structures. The most important feature is the presence of separate confinement of the atom displacements in one of the parts forming the total composite structure for different frequency ranges, thus acting as a kind of phononic cavity.     

Atomic scale properties of interior interfaces of semiconductor heterostructures as determined by quasi-digital highly selective etching and atomic force microscopy

We report on first experiments combining quasi-digital highly selective etching and atomic force microscopy (AFM) to examine the interior interfaces of semiconductor heterostructures. Lattice matched (GaIn)As/InP heterostructures grown by metalorganic vapour-phase epitaxy (MOVPE) are taken as a model system to check the capabilities of this new method. Standard selective etchants for different material systems have been optimized in selectivity and etch rate to achieve a quasi-digital etching behaviour. In this way, the real structure of interior interfaces can be determined by AFM. We find a significant difference between the surface of the heterostructure and the interior interfaces.     

Methods and Results of Optical Investigations on Semiconductor Interfaces

Measurement of the state of polarization of reflected light (ellipsometry) permits the determination of the thickness and refractive index of thin layers formed on a surface. The IR absorption spectra of such thin layers, which can be measured by means of internal reflection spectroscopy (IRS), provide information about their chemical composition. These methods have been used to study adsorption processes and the formation of reaction layers at semiconductor interfaces, and may also be used for measurements of free charge carriers in the space-charge region and in surface states. Results of such investigations are given in this article.     

Surface tension in Ising systems with Kac potentials

We consider an Ising spin system with Kac potentials in a torus of ^d,d>-2, and fix the temperature below its Lebowitz-Penrose critical value. We prove that when the Kac scaling parameter vanishes, the log of the probability of an interface becomes proportional to its area and the surface tension, related to the proportionality constant, converges to the van der Waals surface tension. The results are based on the analysis of the rate functionals for Gibbsian large deviations and on the proof that they -converge to the perimeter functional of geometric measure theory (which extends the notion of area). Our considerations include nonsmooth interfaces, proving that the Gibbsian probability of an interface depends only on its area and not on its regularity.     

Investigation of parameters affecting the on-line combination of supercritical fluid extraction with capillary gas chromatography

Two different injectors, a split/splitless injector and a programmed temperature vaporizer (PTV) injector were investigated as the interface in on-line supercritical fluid extraction (SFE)-capillary gas chromatography (cGC). The parameters affecting the chromatographic peak shapes as well as the quantitative performance of the interfaces in on-line SFE-cGC were identified and studied. Particular attention was paid to the case where modified extraction fluids were used. Experiments were performed on two different samples. The first sample consisted of PAHs spiked on sand at different concentration levels. The other sample was a polymeric material.     

Computer modelling: Future directions

Summary Recent developments in computing and in the theory of simulation have extended greatly the successes of the modelling of ionic crystals pioneered by Mott and Littleton. This has changed the way in which computer experiments are brought to bear on an increasing range of solid-state phenomena. Yet applied science creates new demands, both in the form of new types of system and in terms of the complexity and subtlety of what is studied. The author's brief survey looks at some of the successes and gaps from interfaces and catalysts to neurotransmitters and from superconductors to slags.     

Determination of heterocyclic amines by pneumatically assisted electrospray liquid chromatography-mass spectrometry

Electrospray ionization mass spectrometry was applied to the study of the amines IQ, Trp-P-1, Trp-P-2, PhIP and AC and the co-mutagens harman and norharman. The results obtained on a triple quadrupole mass spectrometer equipped with a pneumatically assisted electrospray source are reported. The chromatographic conditions were optimized with a reversed-phase column (1 mm I.D.) using acetonitrile-5 mM ammonium acetate (pH 6.7) (50:50) as the mobile phase at a flow-rate of 50 μl min⁻¹. Different parameters influencing the mass spectra were investigated. For these compounds [M + H]⁺ in the positive-ion mode and also some fragments produced through collisionally activated decomposition in the interface were observed. Detection limits of 5.4–44 pg were obtained for standard solutions of these amines. Analysis of a meat extract was performed by HPLC-MS using single-ion monitoring after a solid-phase extraction clean-up.