CdSe和ZnO量子点的拉曼光谱研究

本文介绍了用拉曼光谱研究CdSe和ZnO两种Ⅱ Ⅳ族量子点材料的结果,对拉曼峰进行了指认。观察到的光学声子峰位的移动被认为是由量子限制效应引起。     

Spectra Analysis of a Novel Ti-Doped LiAlO2 Single Crystal

LiAlO2 single crvstals doped with Ti at concentration 0.2at.% are grown by the Czochralskl technique with dimensions φ42×55mm. Ti ions in the crystal are quadrivalence proven by comparing the absorption and fluorescence spectra of pure LiAlO2 and Ti： LiAlO2. After air and Li-rich atmosphere annealing, the absorption peaks in the range of 600-800nm disappear. We conclude that 682 and 756nm absorption peaks are attributed to the VLi and Vo absorptions, respectively： The peaks at 716nm and 798nm may stem from the VLi^＋ and absorptions. The colour-centre model can be applied to explain the experimental phenomena. Ti^4＋-doping produces more lithium vacancies in the LiAlO2 crystal. The intensities of [LiO4] and the associated bonds remain unchanged, which improves the anti-hydrolyzation and thermal stability of LiAlO2 crystals.     

Exciton—Phonon Scattering in CdSe／ZnSe Quantum Dots

A temperature-dependent photoluminescence measurement is performed in CdSe/ZnSe quantum dots with a ZnCdSe quantum well.We deduce the temperature dependence of the exciton linewidth and peak energy of the zero-dimensional exciton in the quantum dots and two-dimensional exciton in the CdSe wetting layer.The experimental data reveal a reduction of homogeneous broadening of the exciton line in the quantum dots in comparison with that in the two-dimensional wetting layer,which indicates the decrease of exciton and optical phonon coupling in the CdSe quantum dots.     

Electronic Properties of Red P-Type Tl2S5 Single Crystals

Single crystals of red Tl2S5 were prepared by a special modified vertical Bridgman and Stockbarger technique.This growth was performed in our laboratory. The influences of temperature on the electrical conductivity, Hall mobility, carrier concentration, and thermoelectric power (TEP) were carried out in the temperature range 277-413K. Throughout these measurements, various physical parameters such as effective mass of charge carriers,carrier mobility, diffusion coefficient, and the relaxation time for both majority and minority carriers were found.     

发光反应型有机铵分子与CdSe纳米晶的组装

用巯基乙酸做稳定剂制备了水溶性CdSe纳米颗粒, 用十六烷基三甲基溴化铵(HTAB)、发光性(4-甲氧基均二苯乙烯基)二甲基乙基溴化铵 (MODAB)及末端含有双键的(4-甲基丙烯酰氧基均二苯乙烯基)二甲基乙基溴化铵(MSDAB)对该CdSe纳米颗粒进行了混合组装.通过改变三种有机分子的比例可以调控所得组装体的溶解性、聚合性及其发光性质.实验结果表明,当HTAB:MODAB:MSDAB=1:5.98～5.90:0.02～0.10(摩尔比)时,所得组装体具有较好的聚合性、溶解性和荧光性质.     

Thermoelastic stresses in SiC single crystals grown by the physical vapor transport method

A finite element-based thermoelastic anisotropic stress model for hexagonal silicon carbide polytype is developed for the calculation of thermal stresses in SiC crystals grown by the physical vapor transport method. The composite structure of the growing SiC crystal and graphite lid is considered in the model. The thermal expansion match between the crucible lid and SiC crystal is studied for the first time. The influence of thermal stress on the dislocation density and crystal quality is discussed. The project supported by the National Natural Science Foundation of China (10472126) and the Knowledge Innovation Program of Chinese Academy of Sciences. The English text was polished by Keren Wang     

CdSe:Nd纳米晶及CdSe:Nd@SiO2核壳结构的合成及发光性能

利用有机相法合成Nd³⁺掺杂CdSe纳米晶（CdSe∶Nd）,通过X射线粉末衍射（XRD）、透射电镜（TEM）、紫外吸收光光谱及荧光光谱表征,证明Nd³⁺已经成功掺入到CdSe的晶格中。与纯CdSe纳米晶相比,CdSe∶Nd纳米晶的结构仍为立方晶型,且形貌近似球形,均匀分散,粒径约为2~4 nm。紫外吸收峰和荧光发射峰都发生红移,而且掺杂后的CdSe∶Nd纳米晶量子产率也提高,这可能是由于掺杂Nd³⁺引入了新的杂质能级,带隙减小。为了实现CdSe∶Nd纳米晶的可加工性和功能性,通过微乳法合成SiO₂壳包覆的CdSe∶Nd纳米球（CdSe∶Nd@SiO₂纳米球）,CdSe∶Nd@SiO₂纳米球呈均匀球形,直径约为100~115 nm,并且包壳后的CdSe∶Nd@SiO₂纳米球发射峰（581 nm）与CdSe∶Nd纳米晶（598 nm）相比,发光强度提高且发射峰蓝移,蓝移约为17 nm,可能是因为SiO₂壳可以减少纳米晶表面的非辐射跃迁以及改善表面缺陷导致的。     

(CdSe)n(n=1,2)团簇性质及CdSe分子热力学性质的理论计算

用密度泛函B3LYP方法、有效核势(ECP)基组LanL2DZ对(CaSe)n(n=1,2)团簇进行了理论研究,得到(CaSe)n(n=1,2)分子体系可能存在的状态及各电子状态的平衡几何Re、谐振频率、偶极矩和离解能De、不同温度、压力下的热力学函数值;设用总能量中的电子和振动能量近似代表CdSe分子处于固态时的能量,用总熵中的电子和振动熵近似代表CdSe分子处于固态时的熵,进而计算了Cd与Se反应的△Hθ、△Sθ、△G,并由此计算出不同温度的反应平衡常数Kp结果表明:在298～1400K温度范围内,Cd与Se反应的自由能值均为负,且随着温度的升高,△Gθ值负的越多,表明在这个温度范围内反应能自发发生,而且自发趋势随温度的升高逐渐增大;平衡常数逐渐减小,即反应进行程度随温度的升高逐渐减小;CdSe分子材料的导电性随压力增大而增强.     

退火温度对TiO2/CdSe纳米片异质结薄膜光电性能的影响

采用水热法在FTO上制备（001）高活性晶面主导的TiO₂纳米片薄膜,利用循环伏安法在TiO₂纳米片薄膜上沉积CdSe颗粒,制备了TiO₂/CdSe纳米片异质结薄膜。分别在150、250、350、450 ℃,氩气保护气氛中对样品进行退火。利用X射线衍射仪（XRD）、场发射扫描电镜（FESEM）、X射线光电子能谱分析仪（XPS）、紫外-可见（UV-Vis）分光光度计以及电化学工作站对不同温度退火后的TiO₂/CdSe纳米片异质结薄膜的微观形貌、晶体结构、光电化学性能进行表征和测试。结果表明：六方相CdSe纳米颗粒均匀包覆在TiO₂纳米片表面,直径30 nm左右;随着退火温度的升高CdSe纳米颗粒长大,形成光滑的CdSe薄膜,且晶化程度提高;TiO₂纳米片表面的Se元素与Cd元素发生氧化;TiO₂/CdSe纳米片异质结薄膜对可见光的吸收光谱发生红移,禁带宽度逐渐减小。光电化学性能测试表明随着退火温度的升高,TiO₂/CdSe纳米片异质结薄膜的光电流密度显著提高,开路电压减小,但由于SeO2和CdO的出现,导致填充因子减小,影响光电转换效率的提高。在本实验条件下,TiO₂/CdSe纳米片异质结薄膜的最佳退火温度为150 ℃,填充因子为0.77,光电转换效率达到3.12%。     

基于CdSe/ZnS量子点薄膜结构的高双折射光子晶体光纤的色散与损耗控制

基于有限元法,设计了一种六边形排列含CdSe/ZnS量子点薄膜结构的高双折射光子晶体光纤,分析了具有不同厚度CdSe/ZnS量子点薄膜光子晶体光纤的色散及损耗特性.结果表明,含CdSe/ZnS量子点薄膜结构的光子晶体光纤在x和y方向均存在基模.当泵浦光波长逐渐增加时,具有相同厚度CdSe/ZnS量子点薄膜光子晶体光纤的双折射值逐渐增大,x和y方向总色散先增大后减小且存在两个零色散点,损耗逐渐增大并在可见光波段趋近于零;具有不同厚度CdSe/ZnS量子点薄膜光子晶体光纤随CdSe/ZnS量子点薄膜厚度的增加,在相同泵浦光波长处,双折射值逐渐减小,x和y方向总色散逐渐减小且两个零色散点逐渐靠近,损耗逐渐增大.通过沉积不同厚度CdSe/ZnS量子点薄膜和选择合适泵浦光波长,可有效控制光子晶体光纤的色散和损耗.