Nano-tribological study on a super-hydrophobic film formed on rough aluminium substrates

A novel super-hydrophobic stearic acid (STA) film with a water contact angle of 166^o was prepared by chemical adsorption on aluminum wafer coated with polyethyleneimine (PEI) film. The micro-tribological behavior of the super-hydrophobic STA monolayer was compared with that of the polished and PEI-coated Al surfaces. The effect of relative humidity on the adhesion and friction was investigated as well. It was found that the STA monolayer showed decreased friction, while the adhesive force was greatly decreased by increasing the surface roughness of the Al wafer to reduce the contact area between the atomic force microscope (AFM) tip and the sample surface to be tested. Thus the friction and adhesion of the Al wafer was effectively decreased by generating the STA monolayer, which indicated that it could be feasible and rational to prepare a surface with good adhesion resistance and lubricity by properly controlling the surface morphology and the chemical composition. Both the adhesion and friction decreased as the relative humidity was lowered from 65% to 10%, though the decrease extent became insignificant for the STA monolayer. The project supported by the National Natural Science Foundation of China (50375151, 50323007, 10225209) and the Chinese Academy of Sciences (KJCX-SW-L2)     

沉积温度对硬质合金表面沉积的SiC薄膜的影响

采用强电流直流伸展电弧等离子体CVD技术,以Ar、H2和四甲基硅烷(TMS)为先驱气体,在YG6硬质合金衬底表面制备了SiC薄膜。实验结果表明:随着沉积温度的升高,薄膜的致密性和平整度提高;但当沉积温度过高时,SiC薄膜的表面开始具有含非晶碳球和呈花瓣状的疏松结构。在合适的沉积温度下,SiC薄膜的致密性和平整度较好,且其具有较好的附着力和一定的强度,而这样的SiC薄膜可以阻止在金刚石涂层沉积过程中硬质合金中含有的Co对金刚石相沉积过程的有害作用。     

用于高性能涂料的无定型聚芳醚腈酮共聚物的制备及性能

通过亲核缩聚反应由酚酞、4,4′-二氟二苯酮和2,6′-二氯苯腈制备了一系列不同腈基含量的无定型聚芳醚腈酮共聚物。通过FT-IR、1 H-NMR、13 C-NMR、DSC、TGA等表征了聚合物的结构与性能。研究表明:随着腈基含量的提高,聚合物的玻璃化转变温度升高,在马口铁板上的附着力逐渐提高;该聚合物在有机溶剂中具有良好的可溶性和成膜性,聚合物涂层具有优异的综合性能。     

丝网印刷法制备高催化活性对电极

对电极在染料敏化太阳能电池（DSCs）中主要起催化氧化还原反应及收集电荷的作用,铂对电极常用的制备方法为磁控溅射法,但其成本较高,制备条件苛刻. 本文通过引入低成本的表面活性剂Span-85,所制得的铂对电极的附着力、透光率和均匀性显著改善,实现了面积可控,与两步浸泡法和旋涂热解法制备的对电极在DSCs中的光电转换效率分别为7.30%,6.96%和7.03%. 紫外-可见吸收光谱、扫描电镜和附着力测试等结果表明,（1）添加表面活性剂有利于增加附着力及改善透光率和均匀性;（2）使用该法制备的Pt/FTO对电极的透光率与两步浸泡法制作的相同,且铂粒子分布更加均匀. 电化学阻抗图谱、塔菲尔极化曲线和循环伏安曲线结果表明,丝网印刷方法制备的Pt/FTO对电极具有更加优异的催化性能,且该法更有利于降低其生产成本和大规模生产.     

防覆冰涂层构建机理及制备

航空、通信、电力和运输设备的覆冰现象给人们的生产、生活带来许多不便,甚至引起重大经济损失,防覆冰涂层主要通过材料表面特殊物理化学性能与微相形貌来实现抗冰目的,这类材料需要兼具防结冰性和疏冰性,从延长结冰时间和降低冰的附着力两方面来减轻甚至消除冰雪积聚,是目前研究的热点。本文从防覆冰机理入手,深入探讨了防结冰性和疏冰性的影响因素,阐述了防覆冰涂层材料的设计与制备方面的最新进展,并对防覆冰涂层目前存在的问题与发展方向进行了分析和展望。     

STATIC STUDY OF CANTILEVER BEAM STICTION UNDER ELECTROSTATIC FORCE INFLUENCE

I. INTRODUCTION For capacitor-like microelectromechanical systems (MEMS) structure[1??6], the voltage betweenthe structure and substrate causes attractive force. The sources of the voltage can be an arti?ciallymounted device[2 , 7??9] or the temporar…     

Experimental Investigation of the Velocity Effect on Adhesion Forces with an Atomic Force Microscope

Capillary forces are significantly dominant in adhesive forces measured with an atomic force microscope (AFM) in ambient air, which are always thought to be dependent on water film thickness, relative humidity, and the free energy of water film. We study the nature of the pull-off force on a variety of surfaces as a function of tip velocity. It is found that the capillary forces are of relatively strong dependence on tip velocity. The present experiment is expected to provide a better understanding of the work mechanism of AFM in ambient air.     

光学塑料真空镀膜附着力机理与工艺研究

依据光学塑料的基本特性，研究光学塑料真空镀膜过程中附着力的有关问题。论述薄膜生长过程中影响薄膜附着力的各种因素，针对其相关因素作了具体的理论分析。在真空镀膜实验的基础上，提出了一种提高真空镀膜附着力的具体方法。     

热蒸发YbF3薄膜的机械特性

 实验研究了热蒸发YbF₃薄膜在大气中的应力和附着力。利用Veeco干涉仪,测试了各种工艺条件下单层YbF₃薄膜的应力。结果发现:YbF₃薄膜的残余应力为张应力,热应力在残余应力中的比重较大;沉积方式对薄膜应力的影响不大;薄膜应力在大气中有一个释放的过程。热处理后,YbF₃薄膜应力增大。     

减薄耐磨涂层对斯特林制冷机性能的影响

通过将某型斯特林制冷机压缩活塞耐磨涂层减薄,测试制冷机的性能变化,发现该型制冷机性能并没有受影响,并且在高温下有较优异的性能,一次装调合格率得到提升。这种方法可以缩短加工周期、提高涂层的附着力和可靠性。