直流磁控溅射一步法原位制备MgB2超导薄膜

用MgB2靶,控制直流磁控溅射工作在异常辉光放电或弧光放电状态,在SrTiO3衬底上原位一次性得到了MgB2超导薄膜,其起始转变温度为32K,零电阻温度为15K. 关键词： 高温超导体 超导薄膜 磁控溅射 二硼化镁     

化整为零:聚合物/粘土纳米复合材料的微观结构和阻隔性能

在聚合物基体中掺入少量的层状硅酸盐所制备的聚合物／粘土纳米复合材料，其阻隔性能明显地优于纯聚合物及其传统的复合材料。实验及分析结果表明，聚合物／粘土纳米复合材料的微观结构和阻隔性能主要受控于粘土剥离后的径厚比．一简单的重整化群模型被用来评估粘土几何因素（诸如径厚比、取向、剥离程度等）对聚合物／粘土纳米复合材料阻隔性能的影响，所得到的逾渗阈值及最佳粘土含量与实验结果吻合。     

二维椭圆型方程反问题中优化算法的比较

近年来，决定椭圆型方程系数反问题在地磁、地球物理、冶金和生物等实际问题上有着广泛的应用．本文讨论了二维的决定椭圆型方程系数反问题的数值求解方法．由误差平方和最小原则，这个反问题可化为一个变分问题，并进一步离散化为一个最优化问题，其目标函数依赖于要决定的方程系数．本文着重考察非线性共轭梯度法在此最优化问题数值计算中的表现，并与拟牛顿法作为对比．为了提高算法的效率我们适当选择加快收敛速度的预处理矩阵．同时还考察了线搜索方法的不同对优化算法的影响．数值实验的结果表明，非线性共轭梯度法在这类大规模优化问题中相对于拟牛顿法更有效．     

Magnetic and Crystalline Microstructures of Fe-Pt-B Nanocomposite Ribbons

We investigate magnetic and crystalline microstructures of melt-spun (Fe0.675Pt0.325)100-xBx (x=12, 14, 16, 18,20) nanocomposite ribbons after optimal thermal treatment using a magnetic force microscope. The magnetic microstructures are characterized by darker spots adjacent to brighter ones in a sub-micro scale and in random distribution. It is found that the strength of the exchange coupling interaction between the crystals in the 10-100 nm scale, implied by the maximum value (δM)max of the Henkel plot, could be roughly described by the ratio of the average width of the magnetic spots w^- to the average crystal size D^- for the ribbons. Moreover, we find that the intrinsic coercivity jHc of the ribbons is sensitive to their crystal sizes, and the smaller D^-, the higher jHc. Finally, by using roughness analysis, the curve of the root mean square values (δФ)rms of the phase shift of the magnetic force images versus the boron content x is obtained, which is qualitatively consistent with that of the magnetization σ12 kOe of the ribbons versus x.     

有机硼在不对称合成中的应用

本文综述了重要的手性有机硼试剂的合成，反应，机理及其在不对称合成中的应用。     

Field Emission from Silicon Nanocrystallite Films with Compact Alignment and Uniform Orientation

Patterned silicon nanocrystallite (SINC) films were fabricated on (100) orientation p-type boron-doped sificon wafer by the hydrogen ion implantation technique and the anodic etching method. The efficient field emission with low turn-on field of about 3.5V/μm at current density of 0.1μA/cm^2 was obtained. The emission current density from the SiNC films reached 1mA/cm^2 under a bias field of about 9.1V/μm. The experimental results demonstrate that there are great potential applications of the SiNC films for fiat panel displays. A surface treatment with hydrogen plasma was performed on the SiNC films and a significant improvement of emission properties was achieved.     

稀土掺杂硼铝硅酸盐玻璃结构的NMR研究

采用魔角核磁共振（MAS NMR）研究了稀土掺杂B2O3-Al2O3-SiO2玻璃的结构及其组成和热处理等因素对玻璃结构的影响。研究发现，在B2O3-Al2O3-SiO2玻璃结构中，硼的配位主要是三角体[BO3]和[BO4]，铝的配位主要是[AlO4]，[AlO5]和少量的[AlO6]。随着B2O3-Al2O3-SiO2玻璃中BaO含量的增加，[BO3]逐渐向[BO4]转变，[AlO5]和[AlO5]也转变为[AlO4]。此外，由于稀土离子比钡离子更高的离子场强，其能够积聚硼氧结构使得其形成了巨大的网络结构。随着稀土掺量的增加，玻璃结构中的硅氧配位逐渐以Q4（3T）为主。热处理对玻璃结构中的硼氧和铝氧配位影响很小。