合肥光源高亮度模式Lattice设计

介绍了一组合肥光源新高亮度模式的Lattice. 新的设计维持了储存环上所有元件和光束线位置不变,也没有加入新的元件. 取得了较低发射度. 所有直线节处的垂直方向β函数值都很小，适合插入件的运行. 跟踪计算表明新Lattice具有足够大的动力学孔径用于注入和储存粒子.     

The Design of a 25-Barrel Pellet Injector with Cycle Refrigerator for the HL-2A Device

In the study of nuclear fusion, the conventional fuelling of plasma is edge gas puffing, however many experiments indicated that the fuelling efficiency of gas puffing usually degraded with increase of heat power leading the density profile of plasma control     

低维材料的热导率

一根导热棒 ,如果在它的两端存在温差 ,便会有热量从高温端流向低温端 .这种能量在固体中的传输 ,不是沿着棒按照直线路径完成的 ;其间 ,导热声子将遭遇到频繁的碰撞 ,从而产生热阻 .表征材料导热性能的物理量是热导率κ[单位是W /(m·K) ],而传输的热流密度 jQ(W /m2 )与温度梯度成正比 ,即 jQ=-κdT/dX .如果声子在传输过程中不经历散射 ,则不论导热棒多长 ,jQ 将不依赖于温度梯度 ,而仅仅取决于两端的温差 .引入声子平均自由程l ,经典理论给出 ,κ =(1/3)Cvl,其中C是单位体积材料的热容 ,v是声子的平均速度 .在低温下 ,对于无杂质缺…     

A Facile Synthesis of Silver-Coated Composite Particles by Swelling Surface Method

We report a facile and rapid method for fabrication of composite particles consisting of a polystyrene (PS) core and a uniform silver shell. The process involves the PS colloid surface swelling, the anchoring of silver ions and nanoparticles onto the surfaces, and the subsequent growth of metal seeds in a short period. The present approach has the advantages of simplicity and high efficiency. The TEM images show the morphology of the obtained PS core-silver shell particles, and their chemical composition and crystallinity are analysed by x-ray diffraction. To our knowledge, this is the first study based on swelling PS surface for synthesis of silver-coated PS particles and may be implemented for preparing other metal-coated PS particles.     

The Analysis and Improving of the Microwave Exciter in the Lower Hybrid Wave System

When we carry out lower hybrid wave heating and current driving plasma experiment at tokamak, we need mega-watt order of microwave power. The microwave signal at frequency of 2450 MHz is generated by a microwave exciter. According to the experiment＇s demands, the microwave exciter must provide output power of 1.5～ 2. 5 W with stabilized frequency and amplitude tobe used as the klystron input. Being amplified by the klystron, the microwave signal is transmitted through the transmitting system to the antenna and is emitted into the HL-2A tokamak. So we can see that the microwave exciter＇s function is very important to the lower hybrid wave heating and current driving plasma experiment.     

EPT／BIIR橡胶密封材料制备及其性能

为了探索具备低水蒸气透过系数、低透气系数、低压缩永久变形以及良好耐老化性能的新型橡胶密封材料，鉴于影响并用胶性能的主要因素是共混相容性以及硫化速度，从实现并用胶优势互补角度出发，优选综合性能较好的三元乙丙橡胶（EPT）和溴化丁基橡胶（BIIR），开展了EPT／BIIR共混共硫化技术研究，并开展了DBPMH／HVA-2过氧化物硫化体系在EPT／BIIR并用胶中的应用研究。     

类铍离子低激发态等电子系列的能量、精细结构和超精细结构

采用多组态相互作用方法及Rayleigh-Ritz 变分方法，并考虑相对论修正和质量极化效应，获得了类铍离子等电子系列（Z=4-10）低激发态1s²2p2p ¹D^e和1s²2p3p ³P^e的相对论能量。同时还计算了精细结构和超精细结构。计算结果与其他理论和实验符合的很好。     

乌桕类可可脂结晶过程中表现体积变化

为了解乌桕类可可脂(CTCBE)缓冷结晶横向胀罐爆裂原因，研究CTCBE结晶过程中的膨胀特性，采用流体静力法测试了不同等温结晶条件下CTCBE结晶形成的表观密度和表观体积及其横纵向膨胀状况。结果表明，CTCBE缓冷结晶后形成外部和中部两个晶区。在5-25℃的各等温结晶范围内，当结晶温度增加时，外部结晶区域减小、表观密度变化不大；中部结晶区域增大、表观密度明显减小，CTCBE的表观体积、横向、纵向膨胀率均增大，膨胀横向大于纵向。进一步表明CTCBE在自然缓冷固化的表观体积根本上由其结晶温度决定。为有效防止横向胀罐，自然缓冷固化温度应低于10℃。     

A New High Efficiency Multiwave Cerenkov Generator Operating at Low Magnetic Field

With a resonant cavity inserted between the second slow-wave-structure section and the tapered wavegulde, a new structure of the multlwave Cerenkov generator (MWCG) operating at low guiding magnetic field is proposed to produce high efficiency and high power microwave. Some features and potential advantages of the proposed device are analysed. The 2.5-dimensional partlcle-in-cell simulation is employed to verify the initial expectation.The results show that, with the use of an electron beam of 640keV and 8.4kA guided by the magnetic lield of 0.6 T, a stable and monochromatic X-band microwave output of 4 GW in peak power is achieved, and the average efficiency is over 30%.