Strain hardening of polycarbonate in the glassy state: Influence of temperature and molecular weight

This study is concerned with the temperature and molecular weight dependence of the strain-hardening behavior of polycarbonate. It is shown that the strain-hardening modulus reduces with increasing temperature and decreasing molecular weight. This result is interpreted in terms of temperature accelerated relaxation of the entanglement network. Moreover, it is shown that frozen-in orientations, induced by homogeneous deformations above the glass transition temperature, lead to anisotropic yield behavior that can be fully rationalized (and modelled) in terms of a superimposed stress contribution of the prestrained network. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2041–2049, 2004     

3004铝合金“反常”锯齿屈服现象的研究

在应变速率为5.56×10^-5s^-1—5.56×10^-3s^-1的范围内，在不同温度下(从223K至773K)，对3004铝合金进行系列拉伸试验，探索其锯齿屈服规律；通过激活能的计算、内耗研究、微观组织观察和能谱分析，探讨锯齿屈服的机理与物理本质.结果表明，3004铝合金在形变过程中会出现动态应变时效现象；发现了一种“反常”的锯齿屈服现象：在出现锯齿屈服的温区内，存在锯齿屈服临界应变量转变温度T_t， 关键词： 动态应变时效 锯齿屈服 铝合金 内耗     

Shear and extensional rheology of entangled polymer melts: Similarities and differences

This work extends our previous understanding concerning the nonlinear responses of entangled polymer solutions and melts to large external deformation in both simple shear and uniaxial extension. Many similarities have recently been identified for both step strain and startup continuous deformation, including elastic yielding, i.e., chain disentanglement after cessation of shear or extension, and emergence of a yield point during startup deformation that involves a deformation rate in excess of the dominant molecular relaxation rate. At a sufficiently high constant Hencky rate, uniaxial extension of an entangled melt is known to produce window-glass-like rupture. The present study provides evidence against the speculation that chain entanglements tie up into "dead knots" in constant-rate extension because of the exponentially growing chain stretching with time. In particular, it is shown that even Instron-style tensile stretching, i.e., extending a specimen by applying a constant velocity on both ends, results in rupture. Yet, in the same rate range, the same entangled melt only yields in simple shear, and the resulting shear banding is clearly not a characteristic of rupture. Thus, we conclude that chain entanglements respond to simple shear in the manner of yielding whereas uniaxial extension is rather effective in causing some entanglements to lock up, making it impossible for the entanglement network to yield at high rates.     

Comparing the mechanical response of di‐, tri‐, and tetra‐functional resin epoxies with reactive molecular dynamics

The influence of monomer functionality on the mechanical properties of epoxies is studied using molecular dynamics (MD) with the Reax Force Field (ReaxFF). From deformation simulations, the Young's modulus, yield point, and Poisson's ratio are calculated and analyzed. Comparison between the network structures of distinct epoxies is further advanced by the monomeric degree index (MDI). Experimental validation demonstrates the MD results correctly predict the relationship in Young's moduli. Therefore, ReaxFF is confirmed to be a useful tool for studying the mechanical behavior of epoxies. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 255–264     

A Preferred Synthesis of 1,2,4‐Oxadiazoles

Abstract

An efficient and high‐yielding one‐pot synthesis of 1,2,4‐oxadiazoles from carboxylic acids and amidoximes is described. Activation of the carboxylic acid using hydroxybenzotriazole (HOBt) and EDC/HCl followed by reaction with an amidoxime generates an oxime ester. Without isolation, the oxime ester is dehydrated to give the oxadiazole ring.     

Monitoring abiotic degradation of branched polyethylenes formulated with pro-oxidants through different mechanical tests

The mechanical properties of two linear low density and low density polyethylenes containing a pro-oxidant additive were monitored during accelerated aging (60 °C in a convection oven) and weather exposure. Tearing tests (trouser) were performed for the first time in polyethylenes subjected to oxo-degradation revealing a transition from an extensible to a non-extensible material, at exposure times when standard tensile tests were not able to detect any changes in the materials. The essential work of fracture (EWF) technique was also applied and the results were in agreement with those of trouser tests. The specific essential work of fracture first increased with exposure time until the sample experienced a transition to a less ductile state where EWF was no longer applicable. EWF and trouser tear tests were more sensitive detecting the onset of degradation probably because they employ notched specimens that impose more critical stress concentration conditions than conventional tensile tests.     

滑坡冲击铲刮变量的计算方法研究

高速远程滑坡运动过程中,冲击铲刮效应不仅增加滑坡的体积与规模,而且会增大滑坡成灾范围,风险预测与判断出现明显误差,导致灾难性事件的发生。目前对于高速滑坡的铲刮深度、铲刮范围和铲刮体积等变量计算往往是采用基于经验的铲刮率算法,其是通过体积增量来反算铲刮变量的数学方法,而实际情况中高速滑坡的冲击铲刮是滑体冲击力和地表可铲刮材料之间的力学屈服破坏作用的结果。本文基于接触力学、弹塑性力学和岩土力学,提出了地表可铲刮层在附加冲击荷载作用下铲刮变量的理论计算方法,认为竖向冲击和切向剪切是滑体冲击铲刮过程的两种主要作用方式。结合实际岩土体材料参数,发现不考虑切向荷载时,铲刮层塑性区主要以竖向破裂区为主,考虑切向荷载时,铲刮层塑性区沿切向迁移,直至塑性边界贯通至地表,符合实际情况,实现了对铲刮变量的定量化计算。     

物理老化无规聚苯乙烯屈服机理的研究

利用机械拉伸、示差扫描量热(DSC)以及溶剂溶胀等方法研究了物理老化后的无规聚苯乙烯(α-PS)的应力屈服行为,并从凝聚缠结的观点对实验结果进行了解释.实验结果表明,经物理老化后的α-PS在拉伸过程中出现应力屈服峰实质上是逐步打开凝聚缠结的过程.凝聚缠结是聚合物非晶相在物理老化过程中相邻的两三条链的局部链段由于范德华吸引力的作用形成的一种有序结构,其作用能很弱,升温至T_g附近,机械拉伸至屈服点以及溶胀剂都可将其完全破坏.     

流变岩体中让压支护作用下隧道力学行为研究

高地应力深埋软岩隧道大变形问题已成为隧道工程建设领域的突出难题. 根据高地应力深埋软岩隧道的变形特征, 基于"围岩能量吸收、变形释放"的让压支护是解决软岩隧道大变形问题的有效方法. 针对流变岩体中深埋圆形隧道在让压支护作用下的力学响应问题, 通过引入分数阶微积分理论, 采用Abel黏壶元件建立了改进的分数阶Burgers蠕变模型来表征围岩的时效变形. 此外, 通过在让压支护不同变形阶段引入刚度修正系数, 克服了传统支护未能考虑围岩变形释放的问题. 据此, 本文推导了在考虑支护延迟安装影响下, 不同变形阶段围岩与让压支护相互作用的解析解. 为了验证理论研究的正确性, 对一算例进行了不同解答及工程结果的比对, 吻合较好. 最后, 参数研究结果表明: 围岩与让压支护间的相互作用受蠕变本构模型分数阶阶数影响较大. 隧道的位移或支护压力与让压位移、支护刚度修正系数间存在线性比例关系, 但由于刚度修正系数仅保持在较小的变化范围内, 隧道的位移或支护压力变化并不显著.      

中国科大光力学工作进展

中国科学技术大学光力学实验室近年从事实验力学方法在红外成像、金属物理学以及生化传感等交叉领域的研究，为实验力学带来了新的研究内容，也为相关领域的研究开辟出独特的途径。本文拟对该小组近年来取得的研究进展作一个概述：1）提出微梁阵列FPA变形的高灵敏光学检测法，设计制作出相应的FPA，实现了新概念光学读出红外成像，热成像指标处于国际领先；2）提出用动态散斑研究合金材料锯齿形屈服剪切带，建立了溶质原子与位错交互作用的动态应变时效模型，再现出锯齿形加载曲线和带反复传播的轨迹；3）提出用微梁传感研究大分子／蛋白质构象折叠，检测到构象转变过程中分子间力的相互作用信息和折叠动力学过程，为研究大分子折叠机理提供了一种新途径。