XPS investigations of ink‐jet printed paper

Different ink‐jet printed paper materials were investigated using X‐ray photoelectron spectroscopy (XPS) yielding the elemental composition of the near‐surface region of the papers. We found significant differences with respect to the detected elements and their atomic concentrations in the different inks studied here. Two different groups of inks could be identified by means of a lower ratio of the O and C atomic concentrations and lower concentrations in specific trace elements like Mg, Na and Si. High‐resolution spectra of C 1s and O 1s core levels allowed a detailed determination of the chemical state of the respective elements. On the basis of a detailed deconvolution of these XPS signals, significant differences between all the investigated ink‐jet printed papers were found, thereby allowing their discrimination. The applicability of the measurements and, more generally, the XPS technique for forensic investigations of paper are discussed. Copyright © 2007 John Wiley & Sons, Ltd.     

水性涂料用聚丙烯酸酯微乳液的合成及其表征

低污染、低能耗的乳液涂料在建筑涂料中得到了广泛应用,具有核壳结构的聚合物乳液对胶膜的力学性能有较大的改善[1],微米(或纳米)级乳液具有优异的成膜性能,两者均是近年来高分子材料科学中发展十分迅速的新领域[2]。但微乳液聚合时乳化剂用量大,单体含量少。本文采用阴非离子复合乳化剂体系,单体预乳化工艺,种子乳液聚合法,通过正交实验优化聚合工艺参数及体系配方,合成了纳米级聚丙烯酸酯微乳液。并对乳液聚合物的粒径及分布、热性能、分子量及分布、结构等进行了表征。1　实验部分1 1　主要原料及乳液表征苯乙烯(St)、甲基丙烯酸甲…     

水性丙烯酸酯共聚物交联体系的流变性

用旋转粘度计研究了甲基丙烯酸甲酯／丙烯酸丁酯／丙烯酸三元共聚物水性交联体系的流变性，考察了树脂含量、金属鳌合物含量和氨水水化对其流变性的影响。结果表明：三元共聚物水性交联体系呈非牛顿流体流变行为，具有剪切变稀特性；随树脂含量或鳌合物含量增加，体系的增稠能力得以增强；水化不仅可改善体系的增稠性能，而且可增强体系的非牛顿流变性。     

油墨用聚氨酯树脂的研究

研究用于印刷油墨的单组分溶剂型聚氨酯树脂，考查聚合物多元醇和异氰酸酯对树脂微观形态、机械性能以及印刷适应性和附着性等性能的影响。结果表明：聚酯型树脂的附着性较好，4，4-二甲苯甲烷二异氰酸酯(MDI)基树脂的附着性较佳。     

Book Reviews

Room temperature glass containing copper nitrate was produced using the microemulsion-gel method. Ultraviolet-visible spectroscopy and x-ray diffraction spectra were used to demonstrate the presence of copper nitrate in the gel samples. The samples were examined using optical microscopy, with and without polarized filters, and scanning electron microscopy with energy dispersive x-ray analysis, before and after the extraction of the surfactant with an organic solvent. The results indicated that copper nitrate was present throughout the silicate network formed and was associated with the microemulsion components, i.e., the interstitial liquid, remaining in the bulk material.     

Liquid hydridosilane precursor prepared from cyclopentasilane via sonication at low temperatures without the action of light

We report on a liquid hydridosilane precursor ink prepared via the ultrasonically induced ring-opening polymerisation of cyclopentasilane (Si₅H₁₀) without irradiation by ultraviolet light. The sonication is carried out in N₂ atmosphere at temperatures between 20 and 75 °C. We use size exclusion chromatography (SEC) to show polymer growth and estimate molecular mass with increasing sonication time. In combination with UV–vis transmission measurements, further SEC analysis is used to compare solutions subjected to either purely thermal or ultrasonic treatment at the same process temperature and for the same duration. Our findings provide strong evidence showing that the initiation of the polymerisation is sonocatalytic in nature and not thermic due to the macroscopic temperature of the solution. The liquid precursor is used to produce homogeneous hydrogenated amorphous silicon (a-Si:H) thin films via spin coating and pyrolytic conversion. The optoelectronic properties of the films are subsequently improved by hydrogen radical treatment. Fourier transform infrared spectroscopy (FTIR) is used to determine a compact film morphology and electrical conductivity measurements show that the layers attain a light-to-dark photosensitivity ratio of 2 × 10³ making them suitable for application in optoelectronic devices.     

Advanced Polymer Designs for Direct-Ink-Write 3D Printing

The rapid development of additive manufacturing techniques, also known as three-dimensional (3D) printing, is driving innovations in polymer chemistry, materials science, and engineering. Among current 3D printing techniques, direct ink writing (DIW) employs viscoelastic materials as inks, which are capable of constructing sophisticated 3D architectures at ambient conditions. In this perspective, polymer designs that meet the rheological requirements for direct ink writing are outlined and successful examples are summarized, which include the development of polymer micelles, co-assembled hydrogels, supramolecularly cross-linked systems, polymer liquids with microcrystalline domains, and hydrogels with dynamic covalent cross-links. Furthermore, advanced polymer designs that reinforce the mechanical properties of these 3D printing materials, as well as the integration of functional moieties to these materials are discussed to inspire new polymer designs for direct ink writing and broadly 3D printing.     

A Review of Instrumental Approaches for Studying Historical Inks

In the last 10 years researchers have adapted a number of instrumental techniques for studying various aspects of historical inks that have been used in historical documents. In this paper, the applications of atomic spectroscopy such as GFAAS, ICP-MS, XRF, PIXE, and XANES are described for identifying and quantifying metals that are found in historical inks. Applications of vibrational spectroscopy, primarily Raman and near/mid-IR spectroscopy, are described for detecting organic and inorganic compounds in ink and paper.     

Fabrication of a Simple and Cheap Screen-printed Silver/Silver Chloride (Ag/AgCl) Quasi-reference Electrode

In this work, a silver/silver chloride ink is fabricated using two steps. First the silver ink is prepare using silver, nail polish and acetone. Then the silver ink is painted in a paper substrate and a silver chloride layer is deposited using a bleach solution. The result is the silver/silver chloride conductive ink. The silver ink is cheap ($2.49/g), well-dispersive and very easy to fabricate. The materials were characterized by SEM and XRD. The Ag ink showed the formation of a continuous network throughout the silver ink film with fewer agglomeration. The effective chlorination process was also observed in the Ag/AgCl characterization. Since the Ag/AgCl substrate will be used as a quasi-reference electrode, it is important to investigate the electrical properties. The Ag ink showed an average ohmic resistance of 2.27 Ω. The addition of the AgCl layer decreases the conductivity, as expected. In summary, the Ag/Ag/Cl ink developed is simple, well-dispersed, cheap and with good conductivity. Therefore, it can be used as a conductive ink in the fabrication of quasi-reference electrodes.