硫化物纳米级粒子化膜的形成与气相性质的影响

采用偏振光反光度、紫外及可见光谱、电子显微镜形貌观察、粒子大小测定及电子衍射等方法加以系统研究硫化锌纳米级粒子化膜的制备与气相性质的影响．     

纸带-光纤技术对硫化氢气体测量的初探

以研制的光导纤维反射分光光度计为仪器,建立了根据浸渍醋酸铅的纸带与硫化氢反应生成黑色硫化铅斑点而改变纸带相对反射率,达到对H2S测量的新方法。测量波长为450nm,测量H2S浓度范围为5×10-8mol/L～1.35×10-6mol/L。方法可用于测量废气中的硫化氢。     

Spectrophotometric analysis of the sulphide-thiocyanate and cyanide-thiocyanate mixtures using the copper(II)-DPGH complex

Mixtures of sulphide-thiocyanate and cyanide-thiocyanate can be analyzed without separation using the Cu(II)-DPGH complex.Sulfide and cyanide cause a decrease in absorption that is a linear function of their concentration in the range 0.06–2 and 0.18–6 ppm, respectively. The Cu(II)-DPGH complex is extractable into chloroform in presence of thiocyanate and this is used for the Spectrophotometric determination of thiocyanate in the range 0.09–3 ppm.     

Measurement of the enthalpy of phase transition for iron chevrel phase sulphide in the temperature range from 300 to 500 K

Enthalpy increment H_T-H_289K measurements have been made on iron Chevrel phase sulphide Fe₂Mo₆S_7.8, in the temperature range 300 to 500 K by the drop method using a hightemperature Calvet-type twin calorimeter. The first-order phase transition of this sulphide from a triclinic (low-temperature phase) to a rhombohedral (high-temperature phase) occurred at 375 K, and the enthalpy was evaluated to be 6.0 kJ/mol. The heat capacities of iron Chevrel phase sulphide Fe₂Mo₆S_7.8 were also calculated before and after the phase transition.

---

Zusammenfassung Nach der Tropfenmethode wurden mittels eines Hochtemperaturdoppelkalorimeters vom Typ Calvet im Temperaturbereich 300–500 K an Fe₂Mo₆S_7.8Messungen der Enthalpieinkremente H_T-H_298K durchgeführt. Die Phasenumwandlung erster Ordnung bei diesem Sulfid von der triklinen (Niedertemperaturphase) in die rhomboedrische (Hoch-temperaturphase) erfolgt bei 375 K und die Enthalpie erhielt man mit einem Wert von 6.0 kJ/mol. Die Wärmekapazitäten für Fe₂Mo₆S_7.8 wurden sowohl vor als auch nach der Phasenumwandlung berechnet.

     

硝酸、硫化钠溶液浸取冷原子荧光法选择性测定土壤及河流沉积物中硫化汞

本文研究了饱和硫化钠溶液对土壤样品中硫化汞的浸取效率(其加标回收率达100%),以及用硝酸和硫化钠溶液对样品中汞的选择性浸取并研究了土壤中硫化汞垂直分布。提出了利用硝酸、饱和硫化钠溶液浸取,由冷原子荧光法选择性测定土壤及河流沉积物中硫化汞的新方法。用该方法对同一样品进行8次测定,其相对标准偏差为7.1%。     

Influence of sorbed carbon dioxide on transition temperatures of poly(p-phenylene sulphide)

Static pressure usually increases the transition temperatures of polymers by decreasing their free volume. If the pressurizing medium is soluble in the polymer matrix, the opposing effect of increasing the free volume is possible. Those shifts of transition temperatures were monitored with a medium-pressure Differential Scanning Calorimetry (DSC) device. The influences of sorbed and surrounding gas molecules are demonstrated by changes occurring in the transition temperature regions. The results show the severe plasticizing effect of CO₂ on poly(p-phenylene sulphide) (PPS). The glass transition temperature T_G and the temperature of crystallization T_C are influenced by sorbed gas molecules. They decrease due to sorbed CO₂ molecules. Glass transition is lowered, but is difficult to interpret, as relaxation phenomena which diminish with increasing pressure occur during DSC runs. In crystallites no gas solution is usually possible, so that the melting point of PPS is mainly affected by influences other than plasticization.     

Design and fabrication of multi-layers infrared antireflection coating consisting of ZnS and Ge on ZnS substrate

We have designed, fabricated and characterized a multi-layers antireflection coating on multispectral ZnS substrate, suitable for the infrared range of 8–12 μm. The 4-layers coating (Ge/ZnS/Ge/ZnS) with optimized thicknesses was fabricated by PVD technique and studied by FTIR, nanoindentation and AFM. From FTIR spectroscopy it was found that, in the wavelength range of 8–12 μm, the average transmittance of the double-side coated sample increases by about 26% and its maximum reaches about 98%. To improve the mechanical hardness, a bilayer of Y₂O₃/carbon was deposited on the coating. Nanoindentation test shows that the coating enhances the mechanical properties. The final coating have successfully passed durability and environmental tests.     

Effect of corona discharge on cadmium sulphide and lead sulphide films

This paper describes the effect of corona discharge on cadmium sulphide (CdS) and lead sulphide (PbS) films prepared using the chemical route. The property of films before and after exposure to corona has been described in detail. The electronic properties of the CdS and PbS films have been studied by current-voltage (I-V), capacitance-voltage (C-V) measurements. The structural properties and surface morphology were studied by using X-ray diffraction and scanning electron microscopy before and after exposing to Corona discharge. The films displayed the change in surface morphology after exposure to the corona discharge. It has been found that the films showed an increase in resistivity after exposure. This change in property has been attributed to modification in surface states. Time-dependent recovery indicated that room temperature annealing is sufficient to regain the normal resistivity of the films. The experiment was carried with the aim of studying the effect of the interaction of corona discharge on the semiconductor films and its subsequent effects.     

Nickel sulphide-reduced graphene oxide composites as counter electrode for dye-sensitized solar cells: Influence of nickel chloride concentration

Nickel sulphide-reduced graphene oxide (NiS-rGO) composite films have been prepared via modified Hummers’s method assisted with spin coating technique. The NiS-rGO samples were then employed as counter electrode in a dye-sensitized solar cell (DSSC). The main aim of this work is to investigate the relationship between the concentrations of NiCl₂ with the properties of NiS-rGO and performance parameters of the device. The dominant rGO and minor NiS phase exist in the composite. The morphology of the composite is white strips rGO and NiS agglomerate particle. The element of C, O, Ni and S present in the composite. The highest η of 1.04% and J_sc of 7.39 mA cm⁻² were obtained from the device with 0.06 M NiCl₂ resulted from the longest carrier lifetime. The photovoltaic parameters results reveal that NiS-rGO composite has potential to become as a free platinum counter electrode of DSSC.     

金属硫化物在可充电电池中的研究进展

低成本、长寿命、高安全性、高性能且易于大规模生产的锂/钠离子电池已被证实为重要的二次储能设备。 电极材料对锂/钠电池性能与循环寿命影响极大,金属硫化物由于具有高比容量和低电势而极具潜力成为锂/钠离子电池负极材料。 在电化学循环过程中,由于金属硫化物容易产生穿梭效应和体积变化,从而电极材料结构被破坏,进一步导致电池容量衰退、稳定性降低。 本文总结了多种金属硫化物的微观结构调控策略,从三维空间构建到与其它材料的复合,增强了电极的导电性和减缓体积变化带来的负面影响,进而获得性能优异的金属硫化物负极材料。 通过对金属硫化物的结构与性能的讨论,对其研究前景进行了积极的展望。