轴流风扇叶片端导叶作用的研究

本文采用数值方法研究了叶片端导叶对轴流风扇性能的影响。通过与普通开式轴流风扇比较,分析了叶片端导叶对内部流动作用的机理.数值计算结果表明:叶片端导叶的安装位置将影响轴流风扇气动效率,安装叶片端导叶不能提高风扇静压升,但是在压力面安装时能有效地减小风扇叶顶泄漏流与主流的掺混损失;在设计流量下,压力面安装叶片端导叶使泄漏涡的作用范围较小,涡核更靠近吸力面;吸力面安装叶片端导叶弱化了泄漏涡的强度但没有减小泄漏涡的作用范围。     

前缘弯掠斜流转子叶顶间隙流动特性数值分析

本文对前缘弯掠斜流转子叶顶间隙内的流动特性进行了数值分析。结果表明:叶顶间隙气流与主流发生卷吸而生成泄漏涡。泄漏涡作用的区域具有较低的压力分布。在叶片通道内,泄漏涡沿着与转子旋向相反的方向朝相邻叶片的压力面移动。大间隙时的泄漏涡比小间隙时强烈。低流量时泄漏涡的作用区域比高流量时大。在各种流量特性下,叶顶尾缘近吸力面区域都存在着二次间隙流。     

Study on the anodic reaction of Ni in an alkaline solution by transient pH detection based on scanning electrochemical microscopy (SECM)

The anodic reaction of Ni in an alkaline solution was studied by the tip–substrate voltammetry mode of scanning electrochemical microscopy (SECM) and cyclic voltammetry (CV). A platinum microdisc electrode was selected as the tip electrode, which functioned as a pH sensor with transient response capability. The pH value of the solution near the Ni electrode surface varied while the Ni substrate oxidation reaction occurred, and the pH variation could be detected by the tip faradic current. The cyclic voltammogram results showed that two types of hydroxides: i.e. α‐Ni(OH)₂ and β‐Ni(OH)₂ were formed during Ni oxidation in the lower potential region. In the proceedings of α‐Ni(OH)₂ → γ‐NiOOH and β‐Ni(OH)₂ → β‐NiOOH, the process of OH^? concentration decrease in the solution was ahead and behind of electron transfer in the solid phase, respectively. These results indicate that the OH^? adsorption process occurs as an elementary step in the former reaction and the H⁺ diffusion process from the inner to the outer layer of the solid phase occurs as a subsequent step in the latter reaction. The results also revealed that the oxide film on the Ni surface has a two‐layer structure. The real potential of the oxygen evolution reaction (OER) on the Ni surface with different cycles is also analyzed in the paper. Copyright © 2007 John Wiley & Sons, Ltd.     

Stabilities in field electron emissions from noble‐metal covered W nano‐tips: apex structure dependence

We observed field emission microscopy (FEM) patterns of noble‐metal (NM) covered W nano‐tips with three different apex structures fabricated by field evaporation. Each of the three tips was terminated with a single atom, three atoms or ten atoms. We investigated the temporal changes in the FEM of these tips to discuss the stabilities in the spatial distributions of the field emission (FE) beams. The single‐atom tip showed two characteristics that were superior to the others. First, the beams emitted from the single‐atom tip were the most collimated among the three tips (the semi‐cone angle of 1.0° , FWHM). Second, adsorption of residual gas had little influence on FE from the single‐atom tip, while the other tips were easily contaminated even at ultra high vacuum, resulting in the emission fluctuation. Copyright © 2006 John Wiley & Sons, Ltd.     

泡沫铜对密闭管道内合成气爆炸特性影响的实验研究

为研究泡沫铜孔隙密度和H₂体积分数对合成气爆炸特性的影响,在封闭的管道中安装了孔隙密度为15、25和40 ppi的泡沫铜,实验分析了当量比为1的合成气-空气在不同H₂体积分数时的火焰结构、尖端速度和超压等参数变化规律。实验结果表明：火焰在泡沫铜上游的行为是受“郁金香”火焰形成过程的影响,泡沫铜对其没有影响。但是孔隙密度和H₂体积分数的改变不仅会影响“郁金香”火焰的形成时间,还会影响变形“郁金香”火焰的形成。泡沫铜将火焰分割促使其从层流向湍流转化,对爆炸火焰传播起到加速作用。泡沫铜会引起管道内超压和火焰尖端速度的极大提升,且孔隙密度越小,H₂体积分数越大,火焰穿过泡沫铜后的最大火焰尖端速度越大,压力上升幅度越大,超压峰值越高。

     

一维六方准晶压电材料反平面Ⅲ型裂纹电塑性分析

论文基于一维六方准晶压电材料反平面问题的基本方程,对Ⅲ型裂纹的电塑性区进行分析.采用条带模型并假设在电塑性区的切应力保持为常数,得到了电塑性区大小的表达式.这种假设方式消除了电场和应力在裂纹尖端的奇异性,这与实际情况相符合,也为一维六方准晶压电材料的断裂分析提供了理论基础.     

快点火靶的新型概念和结构分析

提出了一个快点火靶新型概念和结构分析,在锥的尖端制作一个热斑大小的平台,以避免燃料从锥方向逃逸;在平台中间制作一个微纳米点,以约束热电子发射。或者在平台上制作微纳米点阵列,以抬高阿尔文效应限制的条件。考虑超热电子发射的静电势、材料的逸出功,给出了热电子发射能量公式,根据公式提出了关于快点火靶在材料和结构方面的优化条件和研究内容。比如,提高超热电子发射的静电势,和发射材料的选择等,以优化超热电子的出射能量和方向。     

低约束试件断裂韧性测试方法研究进展 1)

低约束试件断裂韧性测试对油气管道安全运营具有重要意义。本文回顾了低约束试件断裂韧性测试方法及发展过程,介绍了裂纹尖端张开位 移(crack tip opening displacement, CTOD)和J积分等常用断裂韧性表征参数,并对断裂韧性测试中应力强度因子、J积分塑性因子、J积分与CTOD转换因子、裂纹尺寸测量方法、数 字图像相关方法等关键问题进行对比分析,总结需要深入研究的问题,为低约束试件断裂韧性测试发展提供一定依据。     

风力机叶尖加小翼动力放大特性实验研究

本文在风力机的叶尖上通过添加V型平板小翼实验,提高了风力机的输出功率.在风洞实验研究中,进行了不同长度和宽度,不同前张角和后张角小翼的探索.实验表明小翼对风力机在一定尖速比λ范围内可以提高功率系数cp值.     

凹槽叶顶冷气射流对涡轮叶尖泄漏流动的影响

涡轮叶尖泄漏流动对涡轮通道内流动损失有着显著影响,叶顶冷气射流对控制叶尖泄漏流动和改善涡轮叶尖气热性能有重要意义.本文利用数值模拟方法,研究了叶顶冷气喷射位置和喷射流量对高压涡轮凹槽叶顶间隙泄漏流动控制的影响.文中重点分析了泄漏流动结构及涡轮气动效率的变化,探讨了冷气对刮削涡这一间隙内主控流动结构演化的影响.研究表明,...