Organic electroluminescent device with aromatic amine-containing polymer as a hole transport layer (II): Poly(arylene ether sulfone)-containing tetraphenylbenzidine

Organic electroluminescent devices were fabricated using a poly(arylene ether sulfone)-containing tetraphenylbenzidine (PTPDES) and tris(8-quinolinolato)-aluminum(III) complex, Alq, as the hole transport layer and the electron-transporting emitter layer, respectively. A device structure of glass substrate/indium—tin oxide (ITO)/PTPDES/Alq/Mg : Ag was employed. Hole injection from ITO through the PTPDES layer to the Alq layer and concomitant electroluminescence from the Alq layer were observed. Bright green light with a luminance of 14,000 cd/m² was observed at a drive voltage of 14 V, indicating that the polymer possesses a high hole mobility and a high electron-blocking capability.     

Preparation of polymers having hole and electron transport units by Friedel–Crafts reaction

Polymers having 2,5‐diphenyl‐1,3,4‐oxadiazole (BCO) or anthracene (BCA) as an electron transport unit and N,N′‐diphenyl‐N,N′‐bis(4‐butylphenyl)‐benzidine (BTPD) as a hole transport unit were prepared by condensation polymerization using Friedel–Crafts reaction. It was found that BCO was less reactive than BCA. The low reactivity of the BCO monomer can be explained by the oxygen atom in the oxadiazole unit, which acts as a Lewis base and reduces the activity of the catalyst. The redox behavior measured by cyclic voltammetry showed for both BTPD‐BCO and BTPD‐BCA almost the same oxidation potential. In addition, the BTPD‐BCO also exhibited a reduction peak. Hole and electron drifts mobility of the polymers were measured by the time‐of‐flight method. The hole drift mobility of both BTPD‐BCO and BTPD‐BCA was 7.4 × 10^?5 cm² V^?1 s^?1. The electron drift mobilities of BTPD‐BCO and BTPD‐BCA were 6.5 × 10^?5 cm² V^?1 s^?1 and 5.2 × 10^?6 cm² V^?1 s^?1, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3083–3089, 2007     

Synthesis,Crystal Structure and Spectroscopic Properties of N,N′-Diphenyl-N,N′-bis(2-fluorophenyl)-1,1′-biphenyl-4,4′-diamine

A fluorinated tetraphenylbenzidine derivative, N,N′-diphenyl-N,N′-bis(2-fluorophenyl)-1,1′-biphenyl-4,4′-diamine (C36H26F2N2, Mr = 524.59) was synthesized via the palladiumcatalyzed Buchwald-Hartwig reaction of N,N′-diphenyl-1,1′-biphenyl-4,4′-diamine with 2-fluoroiodobenzene (yield: 75%) and structurally characterized. It crystallizes in monoclinic, space group P21/n with a = 9.820(7), b = 14.305(11), c = 10.233(8) , β = 108.973(9)o, V = 1359.3(18) 3, Z = 2, Dc = 1.282 g/cm3, μ(MoKα) = 0.084 mm-1, F(000) = 548, S = 1.018, the final R = 0.0439 and wR = 0.0928. It presents a linear centrosymmetric framework constituted by a linkage of biphenyl as a bridge and two fluorinated diphenylamine moieties. The UV-Vis absorption and fluorescence spectra of the title compound were also investigated. This compound emits intense blue fluorescence with a peak wavelength of 406 nm in film.     

ClInPc-(TPD-PVK)光电导体性能的研究

本文以氯化酞菁铟(ClInPc)为载流子发生层(CGL),四苯基联苯胺(TPD)与聚乙烯咔唑(PVK)复合为载流子传输层(CTL),形成双层结构的功能分离型有机光电导体(P/R),研究了它的静电感光性能。结果表明,ClInPc/PMMA(30%)与TPD/PVK(1:1)两者匹配时的P/R具有良好的光电导性能,其电荷接受能力V_max≈800V,光电导率△V_t(ls)>70%,暗衰小(<50V/s),残余电位低(30V/s).由真空蒸镀成膜(CGL)所研制的P/R的光电导性能更为优异。