Dielectric properties of selected laterally fluoro-substituted 4,4′′-dialkyl,dialkoxy and alkyl-alkoxy [1:1′;4′:1′′]terphenyls

Measurements of the complex permittivity, ε*?=?ε′ – iε″, within the frequency range 200 Hz to 10 MHz for 15 laterally fluoro-substituted terphenyls have been conducted. In most cases the substances exhibited the nematic phase over a broad temperature range. All substances were characterised by negative dielectric anisotropy, and are potentially useful for vertical alignment mode systems. The static permittivity tensor components have been analysed in relation to the dipole structure of the molecules. Dielectric relaxation processes observed in the liquid crystalline (LC) and solid rotator (R) phases (obtained by slow cooling of the samples) are characterised by calculation of the relaxation times and activation barriers. The rotation motions around the short axes are typical for LC phases, whereas rotations about the long axes, accompanied in some cases by internal motions, are present in the R phase.     

Suzuki Cross‐coupling Method to Prepare 4,4″‐Diamino‐p‐terphenyl

The synthesis of 4,4″‐dinitro‐p‐terphenyl is accomplished by double Suzuki cross‐coupling. The product was reduced catalytically to give 4,4″‐diamino‐p‐terphenyl in 75% overall yield.     

Synthesis and properties of new materials with banana-shaped achiral cores and chiral end groups

New chiral bent-core mesogens, derivatives of 1,3-phenylene bis[4-(alkanyloxyphenyliminomethyl)benzoate], were synthesized with variation of a substituent (X=F, Cl); their antiferroelectric properties are described. The mesomorphic and switching properties were characterized by differential scanning calorimetry, polarizing optical microscopy, triangular wave method, and X-ray diffractometry in the small and wide angle regions. The presence of chiral tails at the terminals of side wings in the bent-core molecules induced a decrease in transition temperature and formation of the switchable SmC* phase in the melt. In addition, the introduction of a lateral halogen substituent in the Schiff's base moiety prevented the regular stacking of the molecules, resulting in the formation of very complex optical textures. The smectic phase with F-substituted PBFDOB and Cl-substituted PBCDOB showed layer spacings of 39 and 38.5?Å, respectively, corresponding to the end-to-end distance of molecules with a bent conformation. Significantly, the smectic phases of PBFDOB and PBCDOB exhibited a period of 179.5 and 131?Å, respectively, compatible with a helical structure with periodicity about 4.6 and 3.4 times the layer spacings.     

Conformational Isomerism in Monomeric,Low‐Coordinate Group 12 Complexes Stabilized by a Naphthyl‐Substituted m‐Terphenyl Ligand

The synthesis and characterization of the first series of low‐coordinate bis(terphenyl) complexes of the Group 12 metals, [Zn(2,6‐Naph₂C₆H₃)₂] ( 1 ), [Cd(OEt₂)(2,6‐Naph₂C₆H₃)₂] ( 2 ) and [Hg(OEt₂)(2,6‐Naph₂C₆H₃)₂] ( 3 ) (Naph=1‐C₁₀H₇) are described. The naphthyl substituents of the terphenyl ligands confer considerable steric bulk, and as a result of limited flexibility introduce multiple conformations to these unusual systems. In the solid state, complex 1 features a two‐coordinate Zn centre with the ligands oriented in a syn/anti conformation, whereas the three‐coordinate distorted T‐shaped complexes 2 and 3 feature the ligands in the syn/syn configurations. The results of DFT calculations are in good agreement with the solid‐state configurations for these complexes and support the spectroscopic measurements, which indicate several conformers in solution.     

Modular diphosphine ligands based on bisphenol A backbones

A straightforward two-step synthesis is used to obtain new phosphorus-containing ligands based on readily available bisphenol A type backbones. Five diphosphine ligands have been prepared in good yields. An X-ray crystallographic study is presented for ligand 5. Preliminary results on rhodium-catalyzed hydroformylation exemplify the use of these ligands for homogeneous catalysis.     

One‐dimensional CuII coordination polymers containing C2h‐symmetric 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate linkers

Two new one‐dimensional Cu^II coordination polymers (CPs) containing the C_2h‐symmetric terphenyl‐based dicarboxylate linker 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate (3,3′‐TPDC), namely catena‐poly[[bis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ⁴O,O′:O′′:O′′′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂]·H₂O}_n, (I), and catena‐poly[[aquabis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ²O³:O^3′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂(H₂O)]·H₂O}_n, (II), were both obtained from two different methods of preparation: one reaction was performed in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) as a potential pillar ligand and the other was carried out in the absence of the DABCO pillar. Both reactions afforded crystals of different colours, i.e. violet plates for (I) and blue needles for (II), both of which were analysed by X‐ray crystallography. The 3,3′‐TPDC bridging ligands coordinate the Cu^II ions in asymmetric chelating modes in (I) and in monodenate binding modes in (II), forming one‐dimensional chains in each case. Both coordination polymers contain two coordinated dimethylamine ligands in mutually trans positions, and there is an additional aqua ligand in (II). The solvent water molecules are involved in hydrogen bonds between the one‐dimensional coordination polymer chains, forming a two‐dimensional network in (I) and a three‐dimensional network in (II).     

Thermolysis of the phenyltin chlorides,PhxSnCl4–x, (x=1−3): Products and pathways

The thermal degradation of triphenyltin chloride, diphenyltin dichloride and phenyltin trichloride has been studied by pyrolysis at 375°C in sealed tubes for various time periods. In all cases, biphenyl and tin(II) chloride are produced. For both phenyltin trichloride and diphenyltin dichloride, ter- and poly-phenyls are also obtained. In some cases tin(IV) chloride or elemental tin are obtained. Pathways that account for all observed products are presented.     

Helical twisting power of antiferroelectric chiral terphenyls in different matrices

To determine the influence of chemical structure on the Helical Twisting Power (HTP), we tested four optically active dopants having a terphenyl rigid core and the same chiral centre but differing in the length of nonchiral terminal chain and the substitution of benzene rings with fluorine atoms. The compounds were added to different achiral liquid crystalline matrices: nematic and smectic C. It was found that HTP as well as its temperature variation depends on the kind of used matrices. It gives a conclusion that information about HTP obtained in one matrix cannot be uncritically transferred to another one.     

Experimental and Computational Studies of the Molybdenum‐Flanking Arene Interaction in Quadruply Bonded Dimolybdenum Complexes with Terphenyl Ligands

To clarify the nature of the Mo?C_arene interaction in terphenyl complexes with quadruple Mo?Mo bonds, ether adducts of composition [Mo₂(Ar′)(I)(O₂CR)₂(OEt₂)] have been prepared and characterized (Ar′=Ar^Xyl₂, R=Me; Ar′=ArMes₂, R=Me; Ar′=Ar^Xyl2, R=CF₃) (Mes=mesityl; Xyl=2,6‐Me₂C₆H₃, from now on xylyl) and their reactivity toward different neutral Lewis bases investigated. PMe₃, P(OMe)₃ and PiPr₃ were chosen as P‐donors and the reactivity studies complemented with the use of the C‐donors CNXyl and CN₂C₂Me₄ (1,3,4,5‐tetramethylimidazol‐2‐ylidene). New compounds of general formula [Mo₂(Ar′)(I)(O₂CR)₂( L )] were obtained, except for the imidazol‐2‐ylidene ligand that yielded a salt‐like compound of composition [Mo₂(Ar^Xyl2)(O₂CMe)₂(CN₂C₂Me₄)₂]I. The Mo?C_arene interaction in these complexes has been analyzed with the aid of X‐ray data and computational studies. This interaction compensates the coordinative and electronic unsaturation of one of the Mo atoms in the above complexes, but it seems to be weak in terms of sharing of electron density between the Mo and C_arene atoms and appears to have no appreciable effect in the length of the Mo?Mo, Mo?X, and Mo? L bonds present in these molecules.     

Synthesis and properties of soluble trifluoromethyl‐substituted polyimides containing laterally attached p‐Terphenyls

A new fluorinated diamine monomer, 2′,5′‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐p‐terphenyl, was synthesized from the chloro‐displacement of 2‐chloro‐5‐nitrobenzotrifluoride with the potassium phenolate of 2,5‐diphenylhydroquinone, followed by hydrazine palladium‐catalyzed reduction. A series of trifluoromethyl‐substituted polyimides containing flexible ether linkages and laterally attached side rods were synthesized from the diamine with various aromatic dianhydrides via a conventional two‐step process. The inherent viscosities of the poly(amic acid) precursors were 0.84–1.26 dL/g. All the polyimides afforded flexible and tough films. The use of 4,4′‐oxydiphthalic anhydride and 2,2′‐bis(3,4‐dicarboxyphenyl)hexafluoropropane dianhydride produced essentially colorless polyimide films. Most of the polyimides revealed an excellent solubility in many organic solvents. The glass‐transition temperatures of these polyimides were recorded between 254 and 299 °C by differential scanning calorimetry, and the softening temperatures of the polymer films stayed in the range of 253–300 °C according to thermomechanical analysis. The polyimides did not show significant decomposition before 500 °C in air or under nitrogen. These polyimides also showed low dielectric constants (2.83–3.34 at 1 MHz) and low moisture absorption (0.4–2.2%). For a comparative study, a series of analogous polyimides based on the nonfluorinated diamine 2′,5′‐bis(4‐aminophenoxy)‐p‐terphenyl were also prepared and characterized. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1255–1271, 2004