Electron-confined LO-phonon scattering in GaAs-Al0.45Ga0.55As superlattice

We develop a theoretical model to the scattering time due to the electron-confined LO-phonon in GaAs-Al_xGa_1-xAs superlattice taking into account the sub-band parabolicity. Using the new analytic wave function of electron miniband conduction of superlattice and a reformulation slab model for the confined LO-phonon modes, an expression for the electron-confined LO-phonon scattering time is obtained. In solving numerically a partial differential equation for the phonon generation rate, our results show that forx = 0.45, the LO-phonon in superlattice changes from a bulk-like propagating mode to a confined mode. The dispersion of the relaxation time due to the emission of confined LO-phonons depends strongly on the total energy.     

InAs/GaSb superlattice focal plane arrays for high-resolution thermal imaging

The first fully operational mid-IR (3–5 μm) 256×256 IR-FPA camera system based on a type-II InAs/GaSb short-period superlattice showing an excellent noise equivalent temperature difference below 10 mK and a very uniform performance has been realized. We report on the development and fabrication of the detecor chip, i.e., epitaxy, processing technology and electro-optical characterization of fully integrated InAs/GaSb superlattice focal plane arrays. While the superlattice design employed for the first demonstrator camera yielded a quantum efficiency around 30%, a superlattice structure grown with a thicker active layer and an optimized V/III BEP ratio during growth of the InAs layers exhibits a significant increase in quantum efficiency. Quantitative responsivity measurements reveal a quantum efficiency of about 60% for InAs/GaSb superlattice focal plane arrays after implementing this design improvement. The paper presented there appears in Infrared Photoelectronics, edited by Antoni Rogalski, Eustace L. Dereniak, Fiodor F. Sizov, Proc. SPIE Vol. 5957, 595707 (2005).     

Molecular dynamics simulation of DNA‐directed assembly of nanoparticle superlattices using patterned templates

DNA‐directed assembly is a well developed approach in constructing desired nano‐architectures. On the other hand, E‐beam lithography is widely utilized for high resolution nano‐scale patterning. Recently, a new technique combining these two methods was developed to epitaxially grow DNA‐mediated nanoparticle superlattices on patterned substrates. However, defects are observed in epitaxial layers which restricts this technique from building large‐scale superlattices for real applications. Here we use molecular dynamics simulations to study and predict defect formation on adsorbed superlattice monolayers. We demonstrate that this epitaxial growth is energetically driven by maximizing DNA hybridization between the epitaxial layer and the substrate and that the shape anisotropy of the DNA‐mediated template posts leads to structural defects. We also develop design rules to dramatically reduce defects on epitaxial layers. Ultimately, with the assist of the computational study, this technique will open the door to constructing well‐ordered, three‐dimensional novel nanomaterials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1687–1692     

Spin Polarization and Spin‐Flip Through Phosphorene Superlattice

The spin‐dependent transport properties, including spin polarization and spin‐flip for phosphorene superlattice in the presence of an extrinsic Rashba spin‐orbit interaction (RSOI) based on the transfer matrix method, are studied. The results show that the number of barriers in the superlattice structure plays a dominant role in output spin polarization, which can be used in designing optimized spintronic devices. In addition, by controlling on the Rashba strength, an incident spin‐up electron can be transmitted as a spin‐down electron. Also, it enables to convert the unpolarized incident electronic beam (with zero spin polarization) into an arbitrary output spin polarization, which plays a significant role in qubit circuits.     

Highly Ordered Superlattices from Self-assembly of Fe3O4 Nanocrystals

The nano materials often exhibit very interesting electrical, optical, magnetic, and chemical properties, which can not be achieved by their bulk counterparts. The development of uniform nanometer sized particles has been intensively pursued because of their technological and fundamental scientific importance. It is significant that nanostructured materials can be controllably assembled into the required geometry onto substrates, becoming the basis of the next generation of components and devices. The development of new methods and strategies for organizing the nanoparticle basic building blocks into the desired structures is required. Superlattices made from these building blocks give us the opportunity to study not only the properties of the individual building blocks, but also collective effects. The superparamagnetic iron oxide nanocrystals（NCs） have been used in the fields of bio-medicine, ferrofluids, refrigeration system, catalysis,     

正切平方势单量子阱的本征值和本征函数

鉴于“方形”势阱描述量子阱中的电子运动行为过于简单、过于理想,引入了正切平方势来代替,使结果得到了改善。在量子力学框架内,利用正切平方势把电子的Schrdinger方程化为超几何方程,利用系统参数和超几何函数严格地求解了电子的本征值和本征函数,并以Ga_1-xAl_xAs-GaAs-Ga_1-xAl_xAs量子阱为例计算了电子的能级和能级之间的跃迁。结果表明,电子在量子阱中的能量是量子化的,而相邻能级之间的跃迁给出与实验进一步符合的结果。     

h-BN型超晶格等离子体光子晶体能带特性研究

六方氮化硼(h-BN)晶格结构是一种类六方对称复式超晶格结构。具有h-BN晶格构型的光子晶体以其宽光子带隙特点受到国内外学者的广泛关注。本文利用不同尺度低压气体放电管与Al₂O₃介质棒周期性排列,构建了新型h-BN型超晶格等离子体光子晶体,实现其空间结构和等离子体参数的动态调控。利用微波透射谱对比研究了h-BN型超晶格与简单三角晶格等离子体光子晶体禁带位置、宽度和数目。分析了放电电流、介质棒阵列数对不同频段光子带隙的影响,以及电磁波入射角度对电磁传输特性的影响。结果表明：等离子体的引入不仅能够形成新的光子带隙,而且可以选择性地使部分禁带位置发生移动;相对于简单三角晶格,h-BN型超晶格等离子体光子晶体呈现出更多光子带隙;Al₂O₃介质棒阵列数对等离子体光子晶体禁带位置、宽度和数目均具有重要影响。电磁波入射角度变化越大,电磁传输特性差别越显著,透射谱相关性越差。本文所设计的新型h-BN型超晶格等离子体光子晶体为制作可调谐光子晶体提供了新的思路,在微波和太赫兹波控制领域具有潜在应用价值。     

基于锑化物二类超晶格的多色红外探测器研究进展

近年来InAs/GaSb二类超晶格红外探测器在材料晶体结构生长、器件结构设计与成像应用方面取得了飞速发展。尤其在多色红外探测方面,二类超晶格材料以其具备的带隙可调、暗电流小、量子效率高、材料均匀性高,以及成本低等优越性能,使其逐步成为第三代红外焦平面探测器的优选材料。本文阐述了锑化物窄带隙半导体研究中心的锑化物多色红外探测器研究进展。本团队成功实现了低噪声、高量子效率以及低光学串扰的短/中、短/长、中/长、长/长、中/长/甚长波等多种高性能多色红外探测器研制。     

从纳米晶到三维超晶格结构

纳米晶的有序组装对未来纳米材料的应用拓展具有重要意义. 本综述介绍了纳米晶三维超晶格的研究价值以及制备方法,着重对“胶体溶液蒸发”、“不良溶剂扩散”、“胶束引导集聚”、“氢键连接”、“静电聚集”、“DNA导向”、“外场辅助”和“水－油界面辅助”的组装机制进行了总结与评述,同时也探讨了这一新兴领域中仍然存在的挑战.     

非晶态Si/SiN_x超晶格材料的发光与非线性光学特性

采用射频磁控反应溅射技术制备了a-Si/SiN_x超晶格材料,并采用热退火技术对材料进行处理。利用吸收光谱和X射线衍射谱对材料进行表征,结果表明Si层呈现非晶态。为研究材料的三阶非线性光学特性,对材料进行Z扫描研究,测量数据表明,材料的非线性吸收为反饱和吸收,材料非线性折射率呈现为负值,该材料的χ(3)的实部为4.57×10~(-17)C(1.39×10~(-7)esu),虚部为1.49×10~(-17)C(4.48×10~(-8)esu),该极化率数值比体硅材料的χ(3)值大5个数量级。对该材料非线性光学产生的机理进行了研究,认为材料体现出的较强的量子限制效应是非线性极化率增强的主要来源。