One-pot,one-step,and selective terpolymerization of ethylene oxide,propylene oxide,and COS to copoly(thioether)s with tunable thermal properties

Facile construction of sulfur-rich polymers using readily available raw chemicals is an area aggressively pursued but challenging. Herein we use common feedstocks of ethylene oxide (EO), propylene oxide (PO), and carbonyl sulfide (COS) to synthesize copoly(thioether)s which are traditionally produced from unpleasant and difficult to store episulfides. In this protocol, the EO/COS coupling selectively generates a pure poly(ethylene sulfide) (PES) with melting temperature (T_m) values up to 172°C and high yields up to 98%. The EO/PO/COS terpolymerization leads to the incorporation of soft poly(propylene sulfide) (PPS) and hard PES segments together, affording a random PES-co-PPS copoly(thioether) with the complete consumption of EO and PO. Additionally, by simply varying the EO/PO feeding ratio, the obtained copoly(thioether)s possess tunable thermal properties, T_m values in the range of 76–144°C, and excellent solubility. These copolymerizations are conducted in one-pot/one-step at industrially favored reaction temperatures of 100–120°C using catalysts of common organic bases, suggesting a facile and practical manner. Especially, the copoly(thioether) exhibits high refractive indices up to 1.68 owing to its high sulfur content, suggesting a broad application prospect in optical materials.     

Scanning probe microscopy studies of PbS surfaces oxidized in air and etched in aqueous acid solutions

Natural n-type PbS single crystals have been studied using AFM, STM and STS after long-term oxidation in air at ambient temperatures and extensive etching in aqueous acid solutions, in contrast to previous work devoted to initial corrosion of fresh surfaces. The exposure of PbS to atmosphere at high relative humidity for several days yields widespread loose oxidation products; the process is much slower at low humidity. Surface morphologies diverge after the treatment in 1 M perchloric and hydrochloric acid solutions at room temperature and become widely different at elevated temperatures, displaying commonly etch pits up to several micrometers in size and depth along with rather uniformly distributed 20-100 nm protrusions of PbS phase. The changes both in topography and semiconducting properties of PbS found by tunneling spectroscopy have been explained in terms of the non-uniform distribution of donor- and acceptor-type defects D⁺/D⁻ in the metal depleted surface layer, which are generated by chemical reactions and, in turn, determine the rates of the PbS corrosion. In particular, the D⁻ centers exhibit a self-catalyzing effect on the non-oxidative local dissolution of PbS in HCl media, resulting in the deep etch pits.     

泛连通图定理和Ore2条件

记Ore2=min{d(y) d(x)|x,y∈V(G),d(x,y)=2}，本得到：若n阶图G的Ore2≥n 1，则G是[5;n]泛连通图。此是比Faudree等人的定理进一步的结果。     

助熔剂N_aCl－CdCl_2对CdS∶Cu，In结晶状态作用规律研究

发现在确定的热处理温度和时间下，随炉料中助熔剂ＮａＣｌ－ＣｄＣｌ２，总含量的增加，ＣｄＳ：Ｃｕ，Ｉｎ多晶的粒度分布变窄，数均粒径具有最大值，晶粒外型趋于规整且表面平滑．进而证明，多晶的结晶状态对其光电性能具有显著的影响．     

简便快速的硫化氢测定法

本文提出了有一种简易快速测定剂来测定水样中的硫化氢的方法。该法的检出限为０．１ｍｇ／Ｌ，对１．０１ｍｇ／Ｌ的Ｈ２Ｓ样品７次测定的相对标准偏差＜４．１％，１ｈ能测定１２个样品。用本测定了几种水样中的Ｈ２Ｓ含量，回收率为８４％－１０５％。应用它可上标准法的４ｈ左右缩短到５ｍｉｎ；使分析成本降低９／１０；不需配制一系列分析试剂和仪器，只需一支小型塑料管和几片药片，便于渔业水质和环境水质的野外现场监测。     

碱改性γ－Al_2O_3催化剂表面碱强度分布与COS水解活性的研究

用非水滴定法和Ｈａｍｍｅｔｔ系列指示剂测定了ＣＯＳ水解碱改性γ－Ａｌ_２Ｏ_３催化剂的表面碱强度分布．发现表面碱强度分布不均匀与表面能量分布不均匀相呼应．采用零点酸碱强度（Ｈ_（０，ｍａｘ））及碱中心区域分析法，Ｂｒｏｎｓｔｅｄ催化定律，进一步证实ＣＯＳ水解反应具有明显碱催化特征，较高活性催化剂的Ｈ_（０，ｍａｘ）一般为１０左右，对ＣＯＳ水解反应起主要作用的碱性中心的碱强度（Ｈ_０）为４．８≤Ｈ_０≤９．８．对碱金属氧化物改性后的γ－Ａｌ_２Ｏ_３催化剂，Ｂｒｏｎｓｔｅｄ规律在每个碱强度分区域内是适用的．     

聚-4,7-二硫杂壬基倍半硅氧烷铑配合物的合成与催化硅氢化性能

本文叙述了一种新型有机硅聚合物负载配位催化剂——聚-4,7-二硫杂壬基倍半硅氧烷铑配合物的合成、结构及其对烯烃硅氢化反应的催化性能.标题配合物在用量为烯烃摩尔量的十万分之一时仍具有良好的催化活性,烯烃的转化数达到80,000.     

选择性氧化含氰基的对硝基苯硫醚

选择性氧化含氰基的对硝基苯硫醚岳国仁，王建华，张正（南京大学化学系南京２１０００８）关键词含氰基硫醚，选择性氧化，四水合过硼酸钠据报道［１］对硝基苯磺酰基乙腈的合成，反应时间长，可采用四水合过硼酸钠（ＮａＢＯ３·４Ｈ２Ｏ）作为氧化剂，受到重视［２，３...     

Kinetics and mechanism of gold dissolution in thiourea solutions: Effect of sulfide ions

Chronoamperograms for gold in solutions containing 0.1 M thiourea, 0.5 M H₂SO₄, and catalytically active sulfide ions at the concentration c ₁ from 1 × 10^?5 to 4 × 10^?5 M are obtained at different potentials with the aid of an automated setup intended for renewing the electrode surface directly in the solution by cutting off a thin surface layer of the metal. It is shown that the results of measurements of the current practically coincide at a constant value of the product c ₁ t, where t is the time period elapsed after the renewal of the electrode surface. Such a coincidence testifies to a diffusion nature of processes that hamper accumulation of sulfide ions at the gold surface. This fact permitted the use of a procedure developed previously for the calculation of polarization curves at constant values of surface coverage θ by catalytically active ions. At θ = const, the voltammetric curves for gold in sulfide-containing thiourea solutions are shown to correspond to the Tafel equation. With the surface coverage increasing, the effective values of the exchange current i ₀, transfer coefficient α, and anodic reaction order with respect to thiourea P _a increase from the values i }~ 10^?5 A cm^?2, α }~ 0.12, and P _a = 0.2, which are characteristic of pure solutions, to 2 × 10^?4 A cm^?2, α }~ 0.5, and P _a = 1.1 (at θ }~ 0.5). An interpretation to the established regularities is given.     

Carbon dioxide reduction under visible light: a comparison of cadmium sulfide and titania photocatalysts

1. Download : Download high-res image (135KB)
2. Download : Download full-size image