Hydration of complexes of 18-crown-6 with potassium nitrate or potassium picrate in the polymer phase

Adsorption of water vapor by granular polymer based on dibenzo-18-crown-6 and containing potassium nitrate or potassium picrate in the polymer phase was studied by the isopiestic method at 298 K. The adsorption of water vapor is described by isotherms corresponding (according to BDDT classification) to polymolecular absorption with a high adsorptive potential. In terms of the Aranovich model of polymolecular absorption, the monolayer capacity and differential heat of adsorption were calculated, and the stoichiometry of hydration of the potassium nitrate and potassium picrate complexes with immobilized crown ether was estimated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1940–1942, October, 1998.     

Gel permeation chromatographic analysis of polyurethane prepolymer synthesis kinetics II. The effects of stoichiometry and type of diisocyanate

The kinetics of formation of polyurethane prepolymers is studied by an analytical technique which involves reactive quenching of the isocyanate, separation of the oligomeric species by GPC, and measurement by UV absorbance of the quenched moieties. The precision of the kinetic parameters and the ratios of the oligomers are determined. The effect of changes in reactant stoichiometry on the ratio of oligomers is measured and compared to the value predicted by an equation from Flory. Toluene diisocyanate is shown to give fewer high oligomers than predicted, while methylene diphenylene diisocyanate gives nearly the predicted values. Tetramethylxylene diisocyanate gives more high oligomers than predicted, an unexpected but possibly important result. Catalyst is shown to increase the reaction rate of the last by more than 200 times. © 1994 John Wiley & Sons, Inc.     

Spectrophotometric study of the complexation of iodine with 1,7-diaza-15-crown-5 in chloroform solution

The complex formation reaction between iodine and 1,7-diaza-15-crown-5 (DA15C5) has been studied spectrophotometrically in chloroform at 25°C. The resulting 1:2 (DA15C5:I₂) molecular complex was formulated as (DA15C5...;I⁺)I ₃ ^– . The spectrophotometric results, as well as the conductivity measurements, revealed that the gradual release of triiodide ion from its contact ion paired form in the molecular complex into the solution is the rate determining step of the reaction. The rate constant was calculated ask=(8.8±0.2)×10^–3 min^–1. The formation constant of the molecular complex was evaluated from the computer fitting of the absorbance-mole ratio data as logK _f=6.89±0.09.     

The complexation of 2,3-anthracenedicarboxylate by β- and γ-cyclodextrins in mixed solvent systems as studied by induced circular dichroism. The role of cosolvent hydrophobicity

The complexation of 2,3-anthracenedicarboxylate (ADC) by- and-cyclodextrins in water containing an organic solvent has been studied by induced circular dichroism. It has been shown that an increase of organic solvent ratio causes the degradation of the 1:1 ADC:-CD complex and the liberation of one guest molecule from the 2:1 ADC:-CD complex in water. The higher the hydrophobicity of the cosolvent, the weaker the complexation of ADC by-CD.     

Binary and Ternary Complexes Between Lauryl Hexaoxyethylene, Benzoate and Cyclodextrin. Part II. β-CD

The characterization of binary and ternary complexes of benzoate, lauryl hexaoxyethylene (C₁₂E₆) and -CD is presented. The complexation equilibrium was characterized by UV-Vis spectrophotometry, titration microcalorimetry, capillary electrophoresis, and 2D ROESY ¹H-NMR. Results suggested that -CD forms one complex with C₁₂E₆in the stoichiometric ratio of -CD : C₁₂E₆1.5 : 1, with a stability constant 1.3 × 10⁵ M^-1.5. The 2-D ROESY ¹H-NMR spectrum indicated that C₁₂E₆is included inside the -CD cavity. The primary binding site of C₁₂E₆ is on the lauryl subunit of this molecule. Analogous to a previously reported study of -CD, the combination of -CD and C₁₂E₆precipitated from the solution. Addition of benzoate seemed to dissolve the precipitate and nearly doubled the apparent stability constant of the complex. Results from the various techniques supported formation of ternary complexes between -CD, C₁₂E₆, and benzoate.     

Calorimetric titration experiment modelled by equilibrium of 2:1 and 1:1 complexes

The analysis of the calorimetric continuous titration experiment is presented. The proposed method is basing on the collection of larger number of experimental data points than could be obtained from the classical isothermal titration calorimetry experiment. After the deconvolution procedure resulting in the correction for the calorimeter time response the pure power effect signal could be obtained. The collected data enable the detailed analysis of the closely populated 2:1 and 1:1 weak complexes.     

Preparation of epitaxial La0.6Ca0.4Mn1−xFexO3 (x = 0, 0.2) thin films: Variation of the oxygen content

Perovskite thin films with a nominal composition of La_0.6Ca_0.4Mn_1−xFe_xO₃ (x = 0, 0.2) were deposited by pulsed reactive crossed beam laser ablation. The film properties, such as electrical conductivity and magnetoresistance are studied as a function of the oxygen content and substrate type. The oxygen content of the thin films was determined by Rutherford Backscattering and controlled by varying the background gas pressure, pressure of the gas pulse and by using alternatively O₂ and N₂O as the gas pulse.

LaAlO₃ and SrTiO₃ were used as substrates at deposition temperature of 650 °C. The grown films were analyzed by X-ray diffraction in order to optimize the growth conditions, i.e. to obtain epitaxial thin films. Thin films doped with 20% Fe were grown under the same experimental conditions as the undoped LCMO films and the effect of the doping on the structural and transport properties of the thin films has been investigated.

The temperature of the metal–insulator transition was measured as a function of the oxygen content and substrate type.     

Insights into the photophysics,protonation and Cu2+ ion coordination behaviour of anthracene-9,10-dione-based chemosensors

Carboxylic acid–diamine-based Cu²⁺ chromogenic sensors (3 and 4) exhibited colour switching from red to blue with good sensitivity and selectivity towards Cu²⁺ among other physiologically important alkali, alkaline earth and heavy metal ions. This colour-switching phenomenon arises due to selective deprotonation of aryl amine NH by Cu²⁺. Significantly, chemosensor 3 (λ_max 492 nm) shows multiple modes of complexation towards Cu²⁺. It is very much evident from the appearance of blue colour (λ_max 615 nm) at pH >7.0 and yellow colour (λ_max 465 nm) at pH < 4.0. In addition, chemosensor 3 exhibits a unique logic gate system that involves ‘INHIBIT’ and ‘TRANSFER’ logic gates.     

Common Trends and Differences in Antioxidant Activity Analysis of Phenolic Substances Using Single Electron Transfer Based Assays

Numerous assays were developed to measure the antioxidant activity, but each has limitations and the results obtained by different methods are not always comparable. Popular examples are the DPPH and ABTS assay. Our aim was to study similarities and differences of these two assay regarding the measured antioxidant potentials of 24 phenolic compounds using the same measurement and evaluation methods. This should allow conclusions to be drawn as to whether one of the assays is more suitable for measuring specific subgroups like phenolic acids, flavonols, flavanones, dihydrochalcones or flavanols. The assays showed common trends for the mean values of most of the subgroups. Some dihydrochalcones and flavanones did not react with the DPPH radical in contrast to the ABTS radical, leading to significant differences. Therefore, to determine the antioxidant potential of dihydrochalcone or flavanone-rich extracts, the ABTS assay should be preferred. We found that the results of the flavonoids in the DPPH assay were dependent on the Bors criteria, whereas the structure–activity relationship in the ABTS assay was not clear. For the phenolic acids, the results in the ABTS assay were only high for pyrogallol structures, while the DPPH assay was mainly determined by the number of OH groups.     

Composition of oxygen precipitates in Czochralski silicon wafers investigated by STEM with EDX/EELS and FTIR spectroscopy

In this work, we investigated the stoichiometry of oxygen precipitates in Czochralski silicon wafers. The thickness dependence of the Cliff–Lorimer sensitivity factor for the silicon/oxygen system was determined and applied for the investigation of the stoichiometry of oxygen precipitates by EDX. The results show that both plate‐like oxygen precipitates and a transitional form between plate‐like and octahedral precipi‐ tates consist of SiO₂. This was confirmed by EELS low loss spectra where the typical spectrum for amorphous SiO₂ was observed. Moreover, the absorption band of plate‐like precipitates at 1227 cm^–1 was found in the low temperature FTIR spectrum. It was demonstrated that this band can only be simulated by the dielectric constants of amorphous SiO₂. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)