Synthesis and association of poly(N,N‐dimethylacrylamide) copolymers with perfluorocarbon pendent groups connected through polyethylene‐glycol tethers

The synthesis is reported of copolymers of N,N‐dimethylacrylamide (DMA) and methacrylates containing 2,2′‐dihydroperfluorodecanoyl (RF) groups separated from the methacrylate by long polyethylene glycol (PEG) tether groups (between 1000 and 14,000 Da). At concentrations of between 1 and 8 wt % the copolymers with macromonomer contents of 1 mol % or less give gels in organic solvents such as dioxane, THF, or methanol, as well as in water. Given the low molecular weights, this indicates very efficient association of very low numbers of RF groups. Association and gel formation is enormously enhanced in the presence of longer PEG tethers. This is consistent with smaller poly(N,N,‐dimethylacrylamide) (PDMA) intermolecular excluded volume effects that are mediated by the longer PEG tethers and possibly by the incompatibility of PEG and PDMA that may lead to the formation of PEG microdomains. This increases the local concentrations of the RF groups in the PEO domains that are not diluted by the PDMA chains, as would be the case in the absence of PEG tethers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 360–373, 2004     

Viscosity,particle size distribution,and structural investigation of tetramethyloxysilane/2‐hydroxyethyl methacrylate sols during the sol–gel process with acid and base catalysts

The tetramethoxysilane (TMOS)/2‐hydroxylethyl methacrylate (HEMA) hybrid gels were synthesized with acid and base catalysts, via the in situ polymerization of HEMA, with and without the cosolvent methanol. With methanol in the TMOS/HEMA sol, the enhanced esterification and depolymerization reactions of the silanols resulted in a slower growth of silica particles. The silica particles that were synthesized with an acid catalyst were less than 40 nm. The thermal resistance of the poly(2‐hydroxyethyl methacrylate) (PHEMA) chains was enhanced by the addition of colloidal silica. The Fourier transform infrared characterizations and the exothermal peaks on the differential scanning calorimetry traces of these hybrid gels indicated chemical hybridization occurring as a result of condensation of the colloid silica and PHEMA at higher temperatures. Hence, the residual weight content of the hybrid gel after its synthesis with the base catalyst was even higher than the content of TMOS in the hybrid sol. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3476–3486, 2004     

Plasticized microporous poly(vinylidene fluoride) separators for lithium‐ion batteries. II. Poly(vinylidene fluoride) dense membrane swelling behavior in a liquid electrolyte—characterization of the swelling kinetics

Some microporous poly(vinylidene fluoride) (PVdF) separators for lithium‐ion batteries, used in liquid organic electrolytes based on a mixture of carbonate solvents and lithium salt LiPF₆, were characterized by the study of the swelling phenomena on dense PVdF membranes. Various aspects of the kinetics of the carbonate solvents and the solvent mixture sorption in dense PVdF slabs were studied at different temperatures. Non‐Fickian behavior, characterized by S‐shaped sorption curves, was highlighted, and a salt effect, which resulted in two‐stage sorption, was studied. Diffusion coefficients and activation energies were calculated for the Fickian portions of the sorption curves, that is, at short times and low swelling ratios. A strong influence of the different interaction parameters was shown for the swelling kinetics. This study proved that the swelling of microporous PVdF membranes could be considered instantaneous. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 544–552, 2004     

Plasticized microporous poly(vinylidene fluoride) separators for lithium-ion batteries. III. Gel properties and irreversible modifications of poly(vinylidene fluoride) membranes under swelling in liquid electrolytes

Microporous poly(vinylidene fluoride) (PVdF) separators for lithium-ion batteries, used in liquid organic electrolytes, have been characterized with respect to the swelling phenomena on dense PVdF membranes (obtained through hot pressing). In the first and second parts of this study, we have described the swelling equilibria and swelling kinetics of dense PVdF. Here the thermal properties of PVdF gels and their irreversible modifications induced by swelling are characterized. Particular attention is paid to crystallinity modifications, polymer plasticization, and membrane degradation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2308–2317, 2004     

Sol–Gel-Derived Corrosion-Protection Coatings

There is a current need for alternative coatings that can provide corrosion resistance to metals or alloy surfaces due to the environmental hazards posed by conventional coatings. Herein, we report on novel organically-modified sol–gel coatings for the protection of metal and alloy surfaces. The basic concept of chemical conversion of metal surfaces is based on deposition of a hydrophobic, nonporous sol–gel barrier layer for surface protection and corrosion prevention. The properties of these organosilica coatings can be tuned by varying the composition of precursors. The evaluation of hydrophobicity, adhesive strength, and anticorrosion properties of organically-modified sol–gel derived coatings suggests their potential utility as technologically-compatible alternatives to conventional coatings.     

Gelation of poly(n-butylisocyanate) in benzene

Poly (n-butylisocyanate)-benzene solutions prepared by solubilization at 45°C, followed by aging at room temperature were found to be metastable for months, although, eventually, they separated into a birefringent polymer-rich phase and an isotropic solution. These metastable solutions, as well as isothermally phase-separated biphasic samples, flowed and exhibited dynamic moduli indicative of low polymer connectivity. By contrast samples prepared by a freeze-thaw cycle were uniformly and highly birefringent and showed network (gel) behavior at room temperature. The mechanism of gel formation is most likely the exclusion of the polymer from the benzene crystal during crystallization, forcing the polymer to align and exist at grain boundaries. Films formed from solutions have different moduli than those formed from gels, and are consistent with the proposed mechanism.     

Comparison of the sensitivity of 11 crosslinked hyaluronic acid gels to bovine testis hyaluronidase

Crosslinked hyaluronan gels are used in various applications where their stability is a prerequisite. The sensitivity of such gels to hyaluronidase can be determined as an index of stability by several approaches: chromatography, electrophoresis, and viscometry. We describe here a test based on the colorimetric determination of the N-acetyl-d-glucosamine released by hyaluronidase in standardized conditions. The sensitivities to bovine testicular hyaluronidase of 11 different gels used to fill skin wrinkles (Restylane; Perlane; Juvéderm 18, 24, 24HV, 30, and 30HV; Surgiderm 18, 24XP, 30, and 30XP) were compared.The method was reproducible, easy to perform, not time-consuming and allowed us to demonstrate that the sensitivity to testicular hyaluronidase was dependent on the degree of crosslinking of the gels and also on their monophasic/biphasic nature. Under our conditions, Surgiderm 30, 24XP and 30XP were the most resistant gels.We propose to retain the hyaluronidase test to predict the in situ stability of a crosslinked gel used to fill skin wrinkles.     

Characterization of SiO2-P2O5-ZrO2 Sol-Gel/NAFION™ Composite Membranes

Composite membranes were prepared by (a) infiltrating NAFION with SiO₂-P₂O₅-ZrO₂ sol, and (b) recasting a film using NAFION solution containing SiO₂-P₂O₅-ZrO₂ sol. The membranes were characterized by Differential Thermal Analysis and ac-impedance spectroscopy as a function of relative humidity. The influences of the heat treatment (80°C–150°C) and cleaning on the electrical properties were investigated. The incorporation of SiO₂-P₂O₅-ZrO₂ gels into NAFION lead to improvements in its thermal stability and proton conductivity.     

Hydrolysis and Condensation of Transition Metal Alkoxide: Experiments and Simulations

We present here an experimental and numerical study of the chemical and aggregative mechanisms for titanium alkoxide in a reverse micellar medium. NMR experiments were done to study the first step of the sol-gel process: hydrolysis of titanium isopropoxide. Light and X-ray scattering experiments were then conducted to characterize the clustering of aggregates and aggregation kinetics. Fractal dimension, measured by U.S.A.X.S., varies with the hydrolysis ratio and the hydration of the surfactant. This evolution was explained by polydispersity of the hydrolysis which depends on the surfactant concentration. This hypothesis was tested through a numerical simulation of irreversible aggregation using a chemically limited aggregation model. The hydrolyzed sites are distributed among the monomers by a random procedure governed by a polydispersity parameterp, varying from 0 to 1. The total number of hydrolyzed sites is governed by a parameterq belonging to the interval [0, 1]. Thep-q evolution of the fractal dimension coincides rather well with the experimental data in all the region of the two dimensional phase space.