Sonication‐Induced Coiled Fibrous Architectures of Boc‐L‐Phe‐L‐Lys(Z)‐OMe

An ultra‐short peptide Boc‐L ‐Phe‐L ‐Lys(Z)‐OMe (Z=carbobenzyloxy) was shown to act as a highly efficient and versatile low molecular weight gelator (LMWG) for a variety of aliphatic and aromatic solvents under sonication. Remarkably, this simple dipeptide is not only able to form coiled fibres but also demonstrates self‐healing and thermal chiroptical switching behaviour. The formation of coiled assemblies was found to be influenced by the nature of the solvent and the presence of an additive. By exploiting these properties it was possible to modulate the macroscopic and microscopic properties of the organogels of this ultra‐short peptide, allowing the formation of highly ordered single‐domain networks of helical fibres with dimeric or alternatively fibre‐bundle morphology. The organogels were characterized by using FTIR, SEM, NMR and circular dichroism (CD) spectroscopy. Interestingly, CD experiments showed that the organogels of Boc‐L ‐Phe‐L ‐Lys(Z)‐OMe in aromatic solvents exhibit thermal chiroptical switching. This behaviour was hypothesized to stem from changes in the morphology of the gel accompanied by conformational transformation of the gelling agent. The fact that such a small peptide can demonstrate hierarchical assemblies and the possibility of controlling the self‐association is rather intriguing. The self‐healing ability, chiroptical switching and more importantly the formation of helical assemblies by Boc‐L ‐Phe‐L ‐Lys(Z)‐OMe under sonication, make this dipeptide an interesting example of the self‐assembly ability of ultra‐short peptides.     

Rational Design and Application of a Redox‐Active,Photoresponsive, Discrete Metallogelator

A photoresponsive discrete metallogelator was rationally designed by incorporating a photochromic azobenzene subunit in the structure of a redox‐active ferrocene–peptide conjugate. The target molecule was purposefully equipped with a dipeptide unit capable of self‐assembly in response to sonication. The designed molecule was shown to undergo supramolecular self‐assembly and achieve organogelation in response to ultrasound, light, heat, and redox signals. The sol–gel phase transition of the designed gelator was found to be sensitive to a plethora of input stimuli, allowing the application of the sol–gel transition behavior in basic logic gate operations. A gel‐based NOT logic gate operation was realized when the redox‐active property of the organogel was examined by using different oxidizing agents. The smart response of the gelator was further exploited in designing XOR operations under oxidizing or non‐oxidizing conditions.     

Microsphere-to-nanotube transition via in situ sonication triggered in a supramolecular self-assembly system based on triphenylamine derivative

A new gelator 1 containing triphenylamine was designed and synthesized, and formed stable gel in ethyl acetate. The self-assembly process of molecule 1 was thoroughly investigated. The solid microsphere structure formed in gel 1 could be turned into nanotube in the transition process of gel to gel via sonication. At the same time, the intermolecular hydrogen bond of self-assembly system was obviously enhanced under sonication. The XRD and water contact angle experiments results of xerogel 1 before and after sonication showed great difference. The hydrophobicity of xerogel 1 film was obviously decreased with the change of contact angle from 142° to 129° after sonication at 100 W for one minute. From the results, it was possible that the solid microsphere was re-dissolved and further reassembled into nanotube. To our knowledge, it was the first example that the solid sphere structure was changed into nanotube in self-assembly system via sonication.     

Optimisation of sample treatment for arsenic speciation in alga samples by focussed sonication and ultrafiltration

A procedure for arsenic species fractionation in alga samples (Sargassum fulvellum, Chlorella vulgaris, Hizikia fusiformis and Laminaria digitata) by extraction is described. Several parameters were tested in order to evaluate the extraction efficiency of the process: extraction medium, nature and concentration (tris(hydroxymethyl)aminomethane, phosphoric acid, deionised water and water/methanol mixtures), extraction time and physical treatment (magnetic stirring, ultrasonic bath and ultrasonic focussed probe). The extraction yield of arsenic under the different conditions was evaluated by determining the total arsenic content in the extracts by ICP-AES. Arsenic compounds were extracted in 5 mL of water by focussed sonication for 30 s and subsequent centrifugation at 14,000 × g for 10 min. The process was repeated three times. Extraction studies show that soluble arsenic compounds account for about 65% of total arsenic.

An ultrafiltration process was used as a clean-up method for chromatographic analysis, and also allowed us to determine the extracted arsenic fraction with a molecular weight lower than 10 kDa, which accounts for about 100% for all samples analysed.

Speciation studies were carried out by HPLC–ICP-AES. Arsenic species were separated on a Hamilton PRP-X100 column with 17 mM phosphate buffer at pH 5.5 and 1.0 mL min⁻¹ flow rate. The chromatographic method allowed us to separate the species As(III), As(V), MMA and DMA in less than 13 min, with detection limits of about 20 ng of arsenic per species, for a sample injection volume of 100 μL. The chromatographic analysis allowed us to identify As(V) in Hizikia (46 ± 2 μg g⁻¹), Sargassum (38 ± 2 μg g⁻¹) and Chlorella (9 ± 1 μg g⁻¹) samples. The species DMA was also found in Chlorella alga (13 ± 1 μg g⁻¹). However, in Laminaria alga only an unknown arsenic species was detected, which eluted in the dead volume.     

Sonication effects on non-radical reactions. A sonochemistry beyond the cavitation?

The kinetics of pH-independent hydrolysis of 4-methoxyphenyl dichloroacetate were investigated under ultrasonic irradiation with an application of 10% of the maximum power of the equipment and without sonication in acetonitrile–water binary mixtures with a content of acetonitrile ranging from 0.008 to 35 wt.%. Similar kinetic investigations were performed at intensities corresponding to 10%, 20%, 30%, 40%, and 50% of the input energy in solvent mixtures containing 10 wt.% and 25 wt.% acetonitrile. In parallel, the responses of KI and terephthalic acid dosimeters at applied irradiation levels were registered under the same experimental conditions. Significant kinetic sonication effects were found at sound intensities presumably not inducing cavitation in the solution. This result provides an experimental evidence of kinetic effects of ultrasound in the absence of cavitation. A disturbing impact of cavitation on the ultrasonic acceleration of the reaction was found. The implications of these findings were discussed.     

Unconventional Approaches to Hydrogen Sorption Reactions: Non-Thermal and Non-Straightforward Thermally Driven Methods

In the last decades, a broad family of hydrides have attracted attention as prospective hydrogen storage materials of very high gravimetric and volumetric capacity, fast H₂-sorption kinetics, environmental friendliness and economical affordability. However, constraints due to their high activation energies of the different H₂-sorption steps and the Gibbs energy of their reaction with H₂ has led to the need of high thermal energy to drive H₂ uptake and release. High heat leads to significant degradation effects (recrystallization, phase segregation, nanoparticles agglomeration…) of the hydrides. In this context, this short review aims to summarize alternative non-thermal methods and non-straightforward thermally driven methods to overcome the previous constraints. The phenomenology lying behind these methods, i. e. tribological activation, sonication, and electromagnetic radiation, and the effect of these processes on hydrogen sorption properties of hydrides are described. These non-usual approaches could boost the capability of the next generation of solid-hydride materials for hydrogen conversion in energy sector, in mobile devices and as hydrogen reservoirs.     

Determination of Cd and Pb in biological reference materials by electrothermal atomic absorption spectrometry: A comparison of three ultrasonic-based sample treatment procedures

Three different ultrasonic-based sample treatment approaches, the automated ultrasonic slurry sampling, the ultrasonic assisted acid solid-liquid extraction (ASLE) and the enzymatic probe sonication (EPS) were compared and discussed for the determination of Cd and Pb by ET-AAS in biological reference materials. The sample mass chosen to perform the analysis was 10 mg and the liquid volume was 1 ml of nitric acid 1 M. The best results were obtained with the slurry procedure with which it was possible accurate and precise determination of the Cd and Pb content in four of the five reference materials studied. Optimum performance (total metal extraction) of ASLE assisted by ultrasound for Cd was only achieved in two of the four materials assessed whereas total Pb recovery was only possible in three of the five samples. Total extraction with the enzymatic probe sonication was only obtained for Cd in oyster tissue. Neither ASLE nor EPS were able to extract Cd or Pb from spruce needles. Pb concentration obtained after EPS was found to be highly dependent from sample centrifugation speed and time.