Studying the process of ionization of hydrogen in conditions of its forced delivery to a porous nickel oxide electrode

The hydrogen ionization process is studied experimentally on an industrial sintered nickel oxide electrode in models of sealed nickel-metal hydride batteries. It is shown that the hydrogen ionization rates that are reached during overcharge by high current densities in conditions of forced gas delivery into the electrode pores (up to 40 mA cm^?2) exceed the self-discharge rate of a nickel-hydrogen battery by two orders of magnitude. Up to 70% of hydrogen delivered into the compact assembly block undergoes ionization during forced charge of models of sealed nickel-metal hydride batteries with a closed hydrogen cycle. Two independent methods (potentiostatic and manometric) are used to determine the relationship between rates of hydrogen ionization with the degree of the electrode filling with gas and perform estimation of the process intensity at a unit reaction surface. It is established that, in conditions of forced gas delivery, practically all the hydrogen oxidation current is generated at the surface of the nickel oxide electrode beneath thin films of an electrolyte solution at the rate of 4–5 mA cm^?2. It is shown that the hydrogen oxidation rate on a nickel oxide electrode filled in part by gas is independent of the electrode potential, probably because of a tangible contribution made by diffusion limitations to the overall hampering of the process.     

密闭高压消解–ICP–AES测定进口铜精矿中铅、镉、汞、砷

采用密闭高压消解法对样品进行消解,用电感耦合等离子体发射光谱法(ICP–AES)测定进口铜精矿中的铅、镉、砷、汞有害元素。铅、镉、砷、汞的工作曲线分别在0~10,0~1,0~4,0~0.6μg/mL范围内线性良好,线性相关系数大于0.999。各元素加标回收率均为91.0%~104.7%,相对标准偏差均小于3%(n=7)。将密闭高压消解法与电热板加热法和微波消解法进行了比对分析,结果显示,密闭高压消解–ICP–AES法适合用于铜精矿样品的消解与测定。     

An improved sealed quartz‐tube method for the determination of hydrogen isotopes in water

Hydrogen stable isotope analysis has been a valuable tool in the fields of geochemistry and ecological research as well as many other research fields. The methods are mainly divided into the dual‐inlet method (off‐line method) and continuous flow method. The dual‐inlet method is complicated and inefficient, but it is still important because of its high precision and wide application range. Although the continuous flow method improves the experimental efficiency, the memory effect is noticeable and the accuracy is reduced. An improved sealed quartz‐tube method is proposed in this paper. The sample is sealed in a capillary tube and placed in a quartz tube containing chromium powder. It is then packaged, evacuated, reacted at a high temperature, and analyzed for hydrogen isotope ratio. Excellent data accuracy, good reproducibility (<1‰), and no memory effect occurred in the method. The process is relatively simple, and the experimental efficiency is greatly improved, which provides an effective method for the analysis of hydrogen isotopes in complex liquid samples.     

微弧氧化陶瓷膜封孔后处理及抗高温氧化性能的研究

在铝酸盐体系中,利用微等离体氧化脉冲电源在Ti-6Al-4V合金表面制备了以Al2TiO5为主晶相的陶瓷膜层,然后采用钛酸四丁酯/乙醇和硅酸钠溶液的封孔方法对微弧氧化陶瓷膜进行封孔后处理。通过SEM及高温氧化测试,分析比较了陶瓷膜层在封孔前后的表面形貌以及抗高温氧化性能的变化情况。结果表明:封孔后膜层孔洞明显变小。经700℃高温氧化测试,采用钛酸四丁酯/乙醇溶液封孔方法不仅没有带来抗高温氧化性能的提高反而下降,而硅酸钠溶液的封孔方法提高了抗高温氧化性能。     

Zur Berechnung von Geometriefaktoren bei der Kernstrahlungsmessung

Der Geometriefaktor von radioaktiven umschlossenen oder offenen Strahlenquellen hängt bei der Messung mittels einer Kernstrahlungsmeßsonde von der räumlichen Anordnung der Strahlenquelle zu der strahlenexponierten wirksamen Fläche des Detektors und von der Geometrie der Strahlenquelle selbst ab. Fūr punktförmige Strahler in verschiedenen Positionen, Geraden, Kreisflächen und Zylinder wurde in möglichst einheitlicher Vorgehensweise die Berechnung der Geometriefaktoren bezüglich kreisförmiger ebener Detektionsflächen vorgenommen und rechentechnisch in Form von BESM 6-Algolprogrammen realisiert. Die Berechnungsergebnisse sind untereinander konsistent und wurden möglichst durch unabhängige Verfahren oder experimentelle Werte kontrolliert. Die Rechengenauigkeit kann gemäß den vorliegenden Anforderungen frei gewählt werden.     

Zur Methodik der Messung der Aktivität von umschlossenen γ-Strahlungsquellen mittels Ionisationskammern

In der Arbeit wird über eine Empfehlung zur Methodik der Weitergabe der Aktivitätseinheit für umschlossene γ-Strahlungsquellen von den Normalen der metrologischen Slaatsämter der UdSSR (WNIIM) und der DDR (ASMW) an Normale niederer Ordnung berichtet. Die Weitergabe der Aktivitätseinheit geschieht durch Vergleich mittels Ionisationskammern. Die Empfehlung bezieht sich auch auf solche Fälle, in denen neben dem Hauptnuklid ein Verunreinigungsnuklid in der Quelle enthalten ist, sowie auf solche, bei denen unterschiedlicher Aufbau der zu vergleichenden Quellen vorliegt. Auβerdem umfaβt die Empfehlung die Methode der Fehlerrechnung.     

Ultramicro determination of organic halogens using sealed tube dry combustion method

A sealed tube dry combustion method that is simple, accurate, and precise for ultramicro determination of halogens in organic compounds has been developed. Samples below 1 mg are heated at 580 °C for 1 h in an electric furnace. After the combustion and absorption of the gaseous halogen, the interior of the tube is rinsed. Subsequent titration is carried out potentiometrically with silver nitrate and yielded standard deviations of 0.21% for chlorine, 0.17% for bromine, and 0.25% for iodine.     

船舶密闭舱室火灾过程及其模拟计算

密闭舱室火灾是一个三维非定常过程，压力升高是这一过程的重要特征。本文采用质量守恒的方法进行压力校正，建立了计算密闭舱室火灾过程的数学物理模型，数值计算采用非均匀交错网格，结果与实验和理论分析相符较好。     

离子束流剖面分布离线诊断方法探索

提出了一种基于二次离子质谱分析技术的离子束流剖面分布的离线诊断方法,具有分辨率高、可同时给出束流剖面分布和成分信息的特点。利用数值模拟方法对该诊断方法的可行性进行了分析和讨论,并结合原理实验给出了验证结果。结果表明:该方法可以用于真空密封型中子发生器离子束流剖面分布的诊断,能够成为其他诊断方法的验证手段和有力补充。     

Enantioselective analysis of mirtazapine and its two major metabolites in human plasma by liquid chromatography-mass spectrometry after three-phase liquid-phase microextraction

A three-phase liquid-phase microextraction (LPME) method using porous polypropylene hollow fibre membrane with a sealed end was developed for the extraction of mirtazapine (MRT) and its two major metabolites, 8-hydroxymirtazapine (8-OHM) and demethylmirtazapine (DMR), from human plasma. The analytes were extracted from 1.0 mL of plasma, previously diluted and alkalinized with 3.0 mL 0.5 mol L⁻¹ pH 8 phosphate buffer solution and supplemented with 15% sodium chloride (NaCl), using n-hexyl ether as organic solvent and 0.01 moL L⁻¹ acetic acid solution as the acceptor phase. Haloperidol was used as internal standard. The chromatographic analyses were carried out on a chiral column, using acetonitrile-methanol-ethanol (98:1:1, v/v/v) plus 0.2% diethylamine as mobile phase, at a flow rate of 1.0 mL min⁻¹. Multi-reaction monitoring (MRM) detection was performed by mass spectrometry (MS-MS) using a triple-stage quadrupole and electrospray ionization interface operating in the positive ion mode. The mean recoveries were in 18.3-45.5% range with linear responses over the 1.25-125 ng mL⁻¹ concentration range for all enantiomers evaluated. The quantification limit (LOQ) was 1.25 ng mL⁻¹. Within-day and between-day assay precision and accuracy (2.5, 50 and 100 ng mL⁻¹) showed relative standard deviation and the relative error lower than 11.9% for all enantiomers evaluated. Finally, the method was successfully used for the determination of mirtazapine and its metabolite enantiomers in plasma samples obtained after single drug administration of mirtazapine to a healthy volunteer.