Ultrasonic evaluation of anisotropic damage in multiaxially textile-reinforced thermoplastic composites made from hybrid yarns

The basic damage and failure models of multiaxially reinforced composites with a thermoplastic matrix are presented and verified. Within the framework of continuum damage mechanics, a phenomenological model is introduced, where the damage is defined as a change in the elasticity tensor. For damage identification, a specific ultrasonic device was developed. A combination of an immersion set-up and a contact coupling device formed a system for an efficient determination of stiffness-tensor components from convenient sets of velocity measurements. Linked to a tensile machine, it allowed us to measure the anisotropic damage of the new materials group caused by tensile loading. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 42, No. 2, pp. 221–234, March–April, 2006.     

Testing deviations from the inverse square law with a freely falling gravity gradiometer at balloon altitudes

Summary We discuss a null experiment to search for the fifth force at ranges around 10 km. It is proposed to use a three-axis gravity gradiometer to measure the trace of the Earth gravity tensor from a freely falling elevator dropped by a balloon. The main error sources are considered to some extent. Paper presented at the V Cosmic Physics National Conference, S. Miniato, November 27–30, 1990.     

Design and Cold Tests of Asymmetric Quasioptical Resonators

This paper presents the design and test of asymmetric quasioptical resonators for gyrotron applications, where most of the diffraction output coupling comes from the smaller of two mirrors. A computer code based on scalar diffraction theory is used to calculate the resonator losses and the electric field near the mirrors. Resonators with mirror separations approaching confocal have reduced side lobes in the diffraction patterns, which should allow for better power transmission and focusing. Cold tests have been performed at 94 and 141 GHz to measure the quality factor of the asymmetric resonators as a function of mirror separation and mirror misalignment. Typical resonator parameters include 65 cm mirror separation, 1-3% output coupling and 85% of the losses from the small mirror. A half-symmetric resonator with one flat and one curved mirror has also been investigated. The calculated values of Q are in reasonably good agreement with the cold test measurements.     

Untersuchung des anisotropen Kriechverhaltens vorgeschädigter Werkstoffe am austenitischen Stahl X8 CrNiMoNb 16 16

Übersicht Ziel der Untersuchung ist es, den Einfluß von Kriechschädigung und Belastungsvorgeschichte auf das weitere Kriechverhalten nach einer Änderung der Belastungsrichtung zu bestimmen. Die ermittelten Kriechbruchzeiten werden stark von der Änderung der Belastungsrichtung beeinflußt. Dieses Verhalten wird mit einer tensoriell nichtlinearen Theorie erklärt, indem man den Einfluß der Vorschädigung mit einem zweistufigen Tensor darstellt.

---

     

Correlation between gravitational-wave detectors and particle detectors during SN1987A

Summary A review of the correlations between gravitational-wave detectors and particle detectors during SN1987A is given. The correlation between the Maryland and Rome g.w. detectors with the Mont Blanc neutrino detector is illustrated. This correlation extends during a period of one or two hours centred at 2∶45 UT of 23 February 1987, with the ?neutrino? signals delayed by (1.1±0.5) s and with a probability of the order of 10⁻⁵ to be accidental. Using the data obtained with the Kamiokande and IMB detectors, with the same statistical choices and procedures for the data analysis used previously, the above result is confirmed with a probability of the order of 10⁻³ or 10⁻⁴ that the additional correlation be accidental. Paper presented at the V Cosmic Physics National Conference, S. Miniato, November 27–30, 1990.     

微型网状结构支架的力学性能研究

冠状动脉支架为圆柱形微型网状结构，直径1mm，厚度0．1mm，长度10～16mm。在经皮冠状动脉介入PCI治疗中由球囊充气撑开到直径为2．5～3．5mm的支架，在血管内承受血管壁回弹压力。为了保持血液流通支架必须保持其几何圆形。这是一个结构弹塑性稳定性问题。但是目前国际上对于支架的力学性能质量指标主要以强度性能评定而不涉及支架屈曲性能是不妥的。本文对于支架的强度和屈曲性能进行了全面的理论分析和实验研究，自行研制了智能式电子检测仪成功地对微型网状结构支架的强度和屈曲性能实现了实测实验研究。由于微型支架的离散型网状结构的特点，在实验中出现一些特殊的屈曲现象。本文研究结果对于支架的形状与性能设计的改进和力学性能质量标准规范的制订具有重要意义。     

EFFECT OF MOLYBDENUM PROMOTER ON THE Cu-Co BASED CATALYSTS

The synthesis of mixed alcohols (C1-C5) from syngas has been studied at 6. 0 MPa over modified Co/CuLaZr catalysts. The molybdenum addition enhanced greatly the activity and the selectivity to alcohols. The improvement of hydrogenation capacity of the system via a reversible spillover effect of hydrogen could explain this effect, together with a great capacity of CO insertion, illustrated by the effect of C2H4 addition as a probe to syngas. Under our experimental conditions, a mixed alcohol production of 147.1g/kg. cat/h containing a proportion of 33. 1% of higher alcohols (C2 OH) was obtained with a selectivity to ROH of 52. 8%.     

原油溶胶-凝胶等温转变过程中的流变性研究

使用RS75流变仪，采用小振幅振荡剪切方法和稳态剪切方法对含蜡原油在溶胶 -凝胶等温转变过程中的流行了研究．结果表明，等温转变成的凝胶原油的结构在 很大程度上决定于预剪切速率，非牛顿含蜡原油在结构恢复过程中表现出不可逆的 触变特性．而凝胶原油在外力作用下向溶胶状态转变的过程中，要经历从线性粘弹 性变形，到非线性粘弹性变形，再到结构屈服的过程，且高剪切应力下的溶胶原油 结构与预剪切速率无关．     

High temperature corrosion behaviour of M(Co,Ni)CrAIY-coatings on high temperature materials-microanalytical investigations

In our former investigations, the phenomenon high temperature corrosion (HTC) was described exemplarily on selected materialcoating combinations for blades of stationary gas turbines, mainly in the temperature region of up to 750° C. To answer the question, in which manner higher gas inlet and/or higher material surface temperature would influence the HTC behaviour, a special analytical technique—the integral layer profile analysis—was introduced to ameliorate concentration profile methods. By examining IN 738 LC specimens with CoCrAlY plasma spray coating, stressed by hot gas at 900° C, the limits of this system are shown by explaining the corrosion mechanism; the method is also used for other systems, e.g. U 520 with NiCrAlY coating at 750° C.     

α－甲基苯乙烯对HIPS／SBS共混物流变行为及力学性能的影响

用锥板式流变仪研究了α－ＭＳ对ＨＩＰＳ／ＳＢＳ共混物流动行为的影响，结果表明：不同α－ＭＳ用量的共混物和如曲线相似．均随增加τ＿ｗ增大、η＿ａ下降。流动指数，ｎ均小于１为非牛顿假塑性流体。加入少量（约２．５％）α－ＭＳ使共混物熔融指数提高３倍，其总体力学性能变化不大。