Non-isothermal thermogravimetric pyrolysis kinetics of waste petroleum refinery sludge by isoconversional approach

Pyrolysis of petroleum refinery sludge has received global acclamation as a clean conversion technique for providing solution of sludge disposal as well as efficient resource utilization. This communication reports the kinetics study of pyrolysis of petroleum refinery sludge. Experiments were carried out by means of thermogravimetric analysis at different heating rates of 5, 10 and 20°C min⁻¹. The pyrolytic reaction is significant in the temperature range of 200–350°C and analysis and evaluation of kinetic parameters is done in the 100–500°C region of non-isothermal TG curves obtained in nitrogen atmosphere. The activation energy is calculated by iso-conversional method, then other kinetic parameters are determined by considering single reaction and two reaction global kinetic model. Two-reaction model is found to fit satisfactorily the experimental results.     

Determination of arsenic in petroleum refinery streams by electrothermal atomic absorption spectrometry after multivariate optimization based on Doehlert design

This paper reports the development of a methodology for the determination of arsenic in petroleum refinery aqueous streams containing large amounts of unknown volatile organic compounds, employing electrothermal atomic absorption spectrometry with polarized Zeeman-effect background correction. In order to make the procedure applicable, the influence of chemical modification and the drying step was examined. Also, pyrolysis and atomization temperatures and the amount of nitric acid added to the sample were optimized using a multivariate approach based on Doehlert matrix. Obtained results indicate that, in this kind of sample, arsenic must be determined by standard addition procedure with a careful control of the drying step temperature and ramp pattern. In order to evaluate the accuracy of the procedure, a test was performed in six spiked samples of petroleum refinery aqueous streams and the relative errors verified in the analysis of such samples (added As between 12.5 and 190 μg l⁻¹) ranged from −7.2 to +16.7%. The detection limit and the relative standard deviation were also calculated and the values are 68 pg and 7.5% (at 12.5 μg l⁻¹ level), respectively.     

Electron beam induced purification of dilute off gases from industrial processes and automobile tunnels

The electron beam process has proved to be an efficient method for the removal of inorganic pollutants from flue gas. Since it simulates natural processes which occur in the atmospheric photochemistry, it appeared attractive to investigate the potential of the e-beam process to clean off-gases which contain hydrocarbon and inorganic trace components. Such emissions arise from industrial processes and from automobile tunnels. Commercial solvents were vaporized in air and irradiated with energetic electrons (300 keV). CO, CO₂ and aerosol particles were found as products and were determined quantitatively. The aerosol particles can be collected by a gravel bed filter and can be removed by combustion or biological degradation. From experiments and model calculations it was found that the e-beam process is a very economic tool to remove hydrocarbons from large off-gas volumes at initial concentrations of 50–100 mg C/m³, and that NO_x can be removed very efficiently from tunnel off-gas.     

Chemoselective hydrogenolysis of tetrahydrofurfuryl alcohol to 1,5-pentanediol over Ir-MoOx/Si02 catalyst

In this work, MoOx promoted Ir/SiO2 catalysts were prepared and used for the selective hydrogenolysis of tetrahydrofurfuryl alcohol （THFA） to 1,5-pentanediol in a continuous flow reactor. The effects of different noble metals （Ir, Pt, Pd, Ru, Rh）, supports and Ir contents were screened. Among the investigated catalysts, 4 wt%Ir-MoOx/SiO2 with a Mo/Ir atomic ratio of 0.13 exhibited the best catalytic performance. The synergy between Ix particles and the partially reduced isolated MoOx species attached on them is essential for the excellent catalytic performance of Ix-MoOx/SiO2. The catalyst exhibited a better hydrogenolysis efficiency of THFA with the selectivity of 1,5-pentanediol of 65%-74% at a conversion of THFA of 70%-75% when the initial THFA concentration is ranging from 20 wt% and 40 wt%. And higher system pressure was also in favor of the conversion of THFA. During a stability test, the conversion of THFA and 1,5-pentanediol yield over Ix-MoOz/SiO2 decreased with reaction time, which can be explained by the leaching of Mo species during the reaction.     

炼油废水再生工艺技术

采用“悬浮载体生物深度处理、臭氧部分氧化及生物活性炭处理”等工序开发了一种新的炼油废水再生工艺技术，深度处理炼油废水。COD、BOD、NH3-N、油、硫化物、SS、细菌等主要污染物被有效去除，总出水清澈，无色无味，可满足工业用新鲜水、生活与办公、绿化等的水质要求，且处理费用低，运行稳定可靠。     

Scaling considerations for modelling the in situ vitrification process

Thermal-electric field interactions occur in many areas of engineering. An example is the in situ vitrification process, a relatively new technology for remediating hazardous wastes. Mathematical and physical modelling of this process requires knowledge of the similarity constraints involving thermal- electric fields. This paper addresses this issue and derives the scaling relationships for modelling the remediation process from fundamental principles. Requirements for maintaining temperature and electric potential field similarity between the model and the prototype are determined as well as requirements for maintaining similarity in off-gas generation rates. A scaling rationale for designing reduced scale experiments is presented, and the results are assessed numerically.     

Flow injection spectrophotometric determination of copper in petroleum refinery wastewaters

This paper reports a new strategy for flow injection spectrophotometric Cu (II) determination in petroleum refinery wastewaters, exploring its reaction with sodium diethyldithiocarbamate (DDTC), without solvent extraction step, thus avoiding the use of harmful organic solvents. The influence of several chemical and flow variables was studied as well as the possible interferences. Under optimized conditions, the flow system was able to process 63 samples per hour, with a detection limit of 23 ng ml⁻¹ and a RSD of 2.1% at the 0.2 μg ml⁻¹ level. In order to attest the accuracy of the methodology, seven samples of effluents were analyzed by the proposed method and the results were compared with that obtained by FAAS. It was observed that the physical interferences verified in the FAAS procedure, which only permits its use by the standard addition method, were not present in the FIA procedure. The results obtained by FIA method were not statistically different from that obtained by FAAS-standard addition method. Also, the analysis of three spiked samples provided recovery percentages between 93 and 103%.     

Comparative genomics for understanding the structure,function and sub-cellular localization of hypothetical proteins in Thermanerovibrio acidaminovorans DSM 6589 (tai)

The Thermanerovibrio acidaminovorans DSM 6589 (tai) is a unique bacterium isolated from anaerobic sludge bed reactor from sugar refinery in Netherland. The comparative genomic studies for understanding the hypothetical proteins in T. acidaminovorans DSM 6589 (tai) were carried out using different bioinformatic tools and web servers. In all 320 hypothetical proteins were screened from the total available genome. The Insilico function prediction for 320 hypothetical proteins was achieved by using different online servers like CDD-Blast, Interproscan and pfam whereas, the structure prediction for 202 hypothetical proteins were deciphered by using protein structure prediction server (PS2 server). The sub-cellular localization for the identified proteins was predicted by the use of cello v2.5 for 320. The study carried out has helped us to understand the structures and functions of unknown proteins available in T. acidaminovorans DSM 6589 (tai) through comparative genomic approach.     

两种催化裂化干气加工利用方案的对比

催化裂化干气直接加工利用是炼厂副产气体综合利用的重要内容。本文选择工艺技术比较成熟的两种加工方案进行技术经济对比,结论是烃化制乙苯方案的经济性能比羰基化制丙醛、丙酸方案差,但从工艺开发成熟程度和市场需求来看,前一方案的发展规模将比后一方案大。     

Analysis of gases containing inorganic and organic compounds using a combination of a thick-film capillary column and a packed adsorption column

A gas chromatographic system consisting of one multiport valve, two (hot-wire and flame-ionization) detectors and two analytical columns (one thick-film capillary and one packed adsorption column) is used for the analysis of gas samples containing a number of inorganic compounds (hydrogen, argon, oxygen, nitrogen, carbon monoxide, and carbon dioxide) and organic compounds. Examples include samples containing hydrocarbons up to n-nonane and benzene and toluene. The system also permits the analysis of more complicated samples containing, for example, alcohols, in addition to hydrocarbons.