基于摩擦磨损的KDP晶体固结磨料抛光垫优化

本文通过固结磨料球与KDP晶体对磨的单因素试验探究固结磨料球中反应物种类、磨粒浓度、反应物浓度、基体硬度对摩擦系数、磨痕截面积和磨痕处粗糙度的影响,试验结果表明:KHCO₃固结磨料球对磨后磨痕对称性好,磨痕处的粗糙度值低;磨痕截面积随磨粒和反应物浓度的增加而增大,随基体硬度的增大而降低;磨痕处粗糙度随磨粒和反应物浓度的增加先降低后上升,随基体硬度的增大先上升后降低;摩擦系数受磨粒和反应物浓度影响不明显,随基体硬度的增大而降低。选择KHCO₃作为反应物,Ⅰ基体,磨粒浓度为基体质量的100%,反应物浓度为15%制备固结磨料球与KDP晶体对磨后的磨痕轮廓对称度好且磨痕处粗糙度值低,以该组分制备固结磨料垫干式抛光KDP晶体,可实现晶体表面粗糙度Sa值为18.50 nm,材料去除率为130 nm/min的高效精密加工。     

漂移管工作温度对离子迁移率谱的影响

离子迁移率、反应物离子的种类和产量与漂移管工作温度有很大的关系。本研究在不同温度下进行了离子迁移率实验,结果表明,离子迁移率随温度的升高而增大,而提高工作温度可以减少水分子对产物离子的影响,有利于改善系统检测的分辨率;选择合适漂移管工作温度,能有效地增加反应物离子的产量,从而提高系统检测的灵敏度和选择性。     

不同分子量软链段的聚己内酯型聚氨酯扩链反应动力学研究

合成了一系列不同分子量的聚己内酯,进而制备异氰酸根封端的聚己内酯预聚体,用傅里叶变换红外光谱研究了不同分子量的聚己内酯预聚体与二元醇的扩链反应.扩链反应动力学研究结果表明:聚己内酯预聚体与二元醇的扩链反应均为二级反应;随着软链段反应物料分子量的增加,反应速率常数显著降低,但当分子量超过某一范围后,其对反应速率的影响逐渐减小,趋于不变.对于不同硬链段反应物料含量的扩链反应体系,硬链段反应物料含量越高,软链段反应物料分子量对反应速率的影响越明显,而且,当软链段反应物料分子量超过某一范围后,不同体系的反应速率常数间的差值趋于不变.Arrhenius方程中的指前因子(B)随软链段反应物料分子量的变化关系与速率常数对分子量的依赖关系相同;从反应速率常数对温度的依赖关系可见:表观活化能的直线斜率基本相同,扩链反应的活化能主要与官能团的反应活性相关.     

Pathwise Convergence of a Rescaled Super-Brownian Catalyst Reactant Process

Consider the one-dimensional catalytic super-Brownian motion X (called the reactant) in the catalytic medium which is an autonomous classical super-Brownian motion. We characterize both in terms of a martingale problem and (in dimension one) as solution of a certain stochastic partial differential equation. The focus of this paper is for dimension one the analysis of the longtime behavior via a mass-time-space rescaling. When scaling time by a factor of K, space is scaled by K ^η and mass by K ^−η. We show that for every parameter value η ≥ 0 the rescaled processes converge as K→ ∞ in path space. While the catalyst’s limiting process exhibits a phase transition at η = 1, the reactant’s limit is always the same degenerate process.      

恒温恒容平衡体系中的反应物转化率随浓度变化规律的探讨

对恒温恒容条件下的可逆平衡体系在增大反应物浓度（即增大反应物的投料）后自身转化率的变化规律,进行了数学推导,得到了其转化率可能减小、不变或增大的结论。通过实例分析佐证了该结论的正确性,以避免在课堂教学和命题中出现错误。     

乙炔和甲基二氯硅烷的硅氢加成反应研究 Ⅱ.反应物料进样方式及催化剂保护剂的影响

考察了３种不同特点的物料进样方式对乙炔和甲基二氯硅烷的硅氢加成反应的影响；研究了温度、溶剂及乙炔流量等反应条件，对不同进样方式的硅氢加成反应的作用规律．结果表明，物料进样方式不同，反应体系中物料配比及物料混合程度也不同，导致了这一串联硅氢加成反应的硅烷转化率及一次加成选择性极大的差异；在不同进样方式的反应中，反应温度、溶剂等反应条件，表现出极为不同的影响规律；确定了具有高硅烷转化率和一次加成选择性的进样方式以及合适的反应条件．用直接水解的方法制备了聚甲基乙烯基硅氧烷，以此为保护剂，热分解氯铂酸，得到了有高反应活性和稳定性的金属铂胶体．     

合成钛硅分子筛TS-1的一种新方法

In both conventional method[1] and modified method[2] ,organic Si and Ti alkoxides were used as Si source and Ti source respectively, and only strong organic base was used. So this system may be called as organic synthesis one (see Fig 1 )Thangaraj et al[3] reported that in the organic synthesis system only organic strong base TPAOH can be used.     

Novel method for synthesis of titanium silicalite-1 (TS-1)

Titanium silicalite-1 (TS-1) was easily synthesized using inorganic silicon and titanium source, tetrapropylammonium bromide (TPABr) or TPAOH as templating molecule, NH3· H2O, HDA or TEAOH etc. as base sources. In this system, TPA cations (come from TPABr or TPAOH) served as tern-plating agents to direct the MFI structure. NH3H2O, TEAOH or HDA etc. provides the alkalinity necessary for crystallization. X-ray diffraction, UV-Vis, ER spectroscopies, SEM, 29 Si MAS NMR showed that the zeolites obtained possessed all the structural characteristics of TS-1, and titanium atoms were introduced into the framework in TS-1. This material was proved to have high crystallinity and high catalytic activity to allyl chloride epoxidation and propylene epoxidation. All the samples synthesized had similar catalytic properties with a standard TS-1 through compared inorganic reactant system with organic synthesis system using propylene epoxidation. The effects of silicon source and TPABr/SiO2 ratio were discussed.     

Ion mobility spectrometric analysis of vaporous chemical warfare agents by the instrument with corona discharge ionization ammonia dopant ambient temperature operation

The ion mobility behavior of nineteen chemical warfare agents (7 nerve gases, 5 blister agents, 2 lachrymators, 2 blood agents, 3 choking agents) and related compounds including simulants (8 agents) and organic solvents (39) was comparably investigated by the ion mobility spectrometry instrument utilizing weak electric field linear drift tube with corona discharge ionization, ammonia doping, purified inner air drift flow circulation operated at ambient temperature and pressure. Three alkyl methylphosphonofluoridates, tabun, and four organophosphorus simulants gave the intense characteristic positive monomer-derived ion peaks and small dimer-derived ion peaks, and the later ion peaks were increased with the vapor concentrations. VX, RVX and tabun gave both characteristic positive monomer-derived ions and degradation product ions. Nitrogen mustards gave the intense characteristic positive ion peaks, and in addition distinctive negative ion peak appeared from HN3. Mustard gas, lewisite 1, o-chlorobenzylidenemalononitrile and 2-mercaptoethanol gave the characteristic negative ion peaks. Methylphosphonyl difluoride, 2-chloroacetophenone and 1,4-thioxane gave the characteristic ion peaks both in the positive and negative ion mode. 2-Chloroethylethylsulfide and allylisothiocyanate gave weak ion peaks. The marker ion peaks derived from two blood agents and three choking agents were very close to the reactant ion peak in negative ion mode and the respective reduced ion mobility was fluctuated. The reduced ion mobility of the CWA monomer-derived peaks were positively correlated with molecular masses among structurally similar agents such as G-type nerve gases and organophosphorus simulants; V-type nerve gases and nitrogen mustards. The slope values of the calibration plots of the peak heights of the characteristic marker ions versus the vapor concentrations are related to the detection sensitivity, and within chemical warfare agents examined the slope values for sarin, soman, tabun and nitrogen mustards were higher. Some CWA simulants and organic solvents gave the ion peaks eluting at the similar positions of the CWAs, resulting in false positive alarms.     

Fast detection of methyl tert-butyl ether from water using solid phase microextraction and ion mobility spectrometry

Methyl tert-butyl ether (MTBE) is commonly used as chemical additive to increase oxygen content and octane rating of reformulated gasoline. Despite its impact on enhancing cleaner combustion of gasoline, MTBE poses a threat to surface and ground water when gasoline is released into the environment. Methods for onsite analysis of MTBE in water samples are also needed. A less common technique for MTBE detection from water is ion mobility spectrometry (IMS). We describe a method for fast sampling and screening of MTBE from water by solid phase microextraction (SPME) and IMS. MTBE is adsorbed from the head space of a sample to the coating of SPME fiber. The interface containing a heated sample chamber, which couples SPME and IMS, was constructed and the SPME fiber was introduced into the sample chamber for thermal desorption and IMS detection of MTBE vapors. The demonstrated SPME-IMS method proved to be a straightforward method for the detection of trace quantities of MTBE from waters including surface and ground water. We determined the relative standard deviation of 8.3% and detection limit of 5 mg L⁻¹ for MTBE. Because of short sampling, desorption, and detection times, the described configuration of combined SPME and IMS is a feasible method for the detection of hazardous substances from environmental matrices.