Magnetic resonance in amorphous metals based on Fe in the millimeter radiowave range

The research technique of amorphous magnetics is described. The paper gives the experimental data obtained by a multifunctional low-temperature radiospectrometer Buran in the mm radiowave range and presents their analysis.     

往复挤压准晶增强快速凝固Mg92.5Zn6.4Y1.1合金

采用往复挤压工艺将快速凝固Mg92.5Zn6.4Y1.1合金薄带在330℃挤压2道次和4道次,然后正挤压制成Φ10 mm的棒材。用OM,TEM,XRD及DTA研究了往复挤压过程中准晶相I-Mg3YZn6弥散析出及对力学性能的影响。研究表明,往复挤压有利于快速凝固Mg92.5Zn6.4Y1.1合金薄带的焊合,获得组织致密、均匀、高强韧合金。往复挤压2道次,相组成为-αMg和准晶I-Mg3YZn6,脱溶析出纳米准晶相较少;4道次相组成为-αMg和准晶I-Mg3YZn6及MgZn相,脱溶弥散析出的纳米I-Mg3YZn6准晶相及MgZn相较多。往复挤压提高材料的拉伸性能,其主要原因是细晶强化和析出强化。     

Investigation of ultraviolet curable waterborne polyurethane acrylate dispersion based on hydroxyl-terminated polybutadiene

A new kind of ultraviolet (UV) curable waterborne polyurethane acrylate dispersion was synthesized based on hydroxyl-terminated polybutadiene (HTPB), poly-(propylene glycol) (PPG), isophorene diisocyanate (IPDI), 2-hydroxy ethyl acrylate (HEA) and dimethylol propionic acid (DMPA) after neutralizing by triethylamine (TEA). 2-Hydroxy-1-[4-2-hydroxyethoxy) phenyl]-2-methyl-1-propanone (Irgacure 2959) was used as a photoinitiator and deionized water as a diluent. Fourier transform infrared (FTIR) analysis was used to identify the chain structure of the UV-curable polyurethane prepolymer based on HTPB and the curing process. Effects of relative content of HTPB and PPG on emulsion stability, resistance to water and ethanol, thermal stability, compatibility of soft and hard segment, as well as the mechanical property of the cured film were investigated. Translated from Polymer Materials Science and Engineering, 2006, 22(3): 199–203 (in Chinese)     

Integrating Rigidity Analysis into the Exploration of Protein Conformational Pathways Using RRT* and MC

To understand how proteins function on a cellular level, it is of paramount importance to understand their structures and dynamics, including the conformational changes they undergo to carry out their function. For the aforementioned reasons, the study of large conformational changes in proteins has been an interest to researchers for years. However, since some proteins experience rapid and transient conformational changes, it is hard to experimentally capture the intermediate structures. Additionally, computational brute force methods are computationally intractable, which makes it impossible to find these pathways which require a search in a high-dimensional, complex space. In our previous work, we implemented a hybrid algorithm that combines Monte-Carlo (MC) sampling and RRT*, a version of the Rapidly Exploring Random Trees (RRT) robotics-based method, to make the conformational exploration more accurate and efficient, and produce smooth conformational pathways. In this work, we integrated the rigidity analysis of proteins into our algorithm to guide the search to explore flexible regions. We demonstrate that rigidity analysis dramatically reduces the run time and accelerates convergence.     

盐酸含量对光固化聚氨酯丙烯酸酯/SiO2杂化材料结构和性能的影响

由正硅酸乙酯水解制得的SiO2溶胶，在以γ—甲基丙烯酰氧丙基三甲氧基硅烷(TMSPM)为偶联剂的体系中，经溶胶-凝胶法制备了透明的光固化聚氨酯丙烯酸酯杂化材料[(PUA—TMSPM)／SiO2]。研究了盐酸浓度对(PUA-TMSPM)／SiO2结构与性能的影响。结果表明：随着pH值减小，硅溶胶体系和(PUA-TM-SPM)／SiO2杂化体系的热稳定性增大；盐酸摩尔分数XHCl的增加使(PUA-TMSPM)／SiO2光固化膜表面的两相界面结合更紧密，涂层变得更致密，并导致膜的硬度和耐磨性提高。     

光固化环氧丙烯酸酯/SiO2杂化材料的研究

用FTIR、SEM、DSC和TGA表征了光固化环氧丙烯酸酯／SiO2杂化材料[(EA-TMSPM)／SiO2]，研究了盐酸、γ-甲基丙烯酰氧丙基三甲氧基硅烷(TMSPM)和无机物浓度对(EA-TMSPM)／SiO2结构与性能的影响。结果表明，无机物浓度高的(EA-TMSPM)／SiO2杂化体系中SiO2粒子尺寸略大于无机物浓度低的体系；盐酸和无机物浓度的增加，都可以增强杂化材料的耐磨性。     

顶空-气相色谱-质谱联用法同时测定紫外光固化胶印油墨中27种溶剂残留

建立了同时测定紫外光固化（UV）胶印油墨中27种溶剂残留（挥发性有机化合物,VOCs）的顶空-气相色谱-质谱联用（HS-GC-MS）法。将UV胶印油墨样品模拟印刷制成一定面积、厚度的试样,在紫外灯下烘烤1 min,经80℃、45 min静态顶空后,通过VOC专用毛细管柱分离和质谱检测,外标法定量。27种VOCs均呈现良好的线性关系,相关系数（R²）均≥0.9950;方法的检出限（LODs,S/N=3）为0.001~0.310 mg/m²,定量限（LOQs,S/N=10）为0.003~0.920 mg/m²;样品的平均加标回收率为80%~108%,相对标准偏差（RSD）<6%（n=6）。该方法制样便捷,灵敏度高,精密度好,准确度高,将其应用于实际UV胶印油墨样品的检测,取得了良好效果。     

Spectral analysis and numerical simulation for second order elliptic operator with highly oscillating coefficients in perforated domains with a periodic structure

This paper discusses the spectral properties and numerical simulation for the second order elliptic operators with rapidly oscillating coefficients in the domains which may contain small cavities distributed periodically with period ε. A multiscale asymptotic analysis formula for this problem is obtained by constructing properly the boundary layer. Finally, numerical results are given, which provide a strong support for the analytical estimates     

A conservative unstructured scheme for rapidly varied flows

This article introduces a new semi‐implicit, staggered finite volume scheme on unstructured meshes for the modelling of rapidly varied shallow water flows. Rapidly varied flows occur in the inundation of dry land during flooding situations. They typically involve bores and hydraulic jumps after obstacles such as road banks. Near such sudden flow transitions, the grid resolution is often low compared with the gradients of the bathymetry. Locally the hydrostatic pressure assumption may become invalid. In these situations, it is crucial to apply the correct conservation properties to obtain accurate results. An important feature of this scheme is therefore its ability to conserve momentum locally or, by choice, preserve constant energy head along a streamline. This is achieved using a special interpolation method and control volumes for momentum. The efficiency of inundation calculations with locally very high velocities, and in the case of unstructured meshes locally very small grid distances, is severely hampered by the Courant condition. This article provides a solution in the form of a locally implicit time integration for the advective terms that allows for an explicit calculation in most of the domain, while maintaining unconditional stability by implicit calculations only where necessary. The complex geometry of flooded urban areas asks for the flexibility of unstructured meshes. The efficient calculation of the pressure gradient in this, and other semi‐implicit staggered schemes, requires, however, an orthogonality condition to be put on the grid. In this article a simple method is introduced to generate unstructured hybrid meshes that fulfil this requirement. Copyright © 2008 John Wiley & Sons, Ltd.