Creating the Ideal Push-Pull System for Electrocatalysis: A Comparative Study on Symmetrical and Asymmetrical Cardanol-based Cobalt Phthalocyanines

A symmetrical cardanol-based cobalt phthalocyanine (Pc) along with its asymmetrical acid-based derivatives were synthesized and applied in the electrocatalysis of hydrazine. Despite the inhibition of electron movement by the bulky cardanol-based substituent throughout the series of molecules, an ideal combination of substituents was established in GCE- 3 (2,9,16-tris(3-pentadecylphenoxy)-23-mono propionic acid phthalocyanato cobalt (II)) where a limit of detection (LoD) value of 5.10 μM (signal to noise ratio=5) was recorded for the detection of hydrazine. The results obtained serve as an illustration that the combination of electron-donating and electron-withdrawing substituents has a significant influence on the complete functioning of the phthalocyanine molecule(s) being investigated.     

高功率窄脉宽半导体激光激励器设计

为了获得高功率窄脉宽半导体激光,设计了半导体激光器相应的激励单元,论述MOSFET作为高速开关的工作机理,分析基于MOSFET作为高速开关产生窄的大电流脉冲的电路模型.为了使MOSFET开关速度尽可能快,根据前述分析,提出推挽式MOSFET栅极驱动方式并设计了触发窄脉冲的发生电路.当激光二极管接入放电回路时,实验表明:激光二极管输出光的峰值功率可达67.5 W,脉宽约为20 ns.最后,简要分析了影响光脉冲宽度的因素.     

“推-拉”型巯基偶氮苯衍生物的合成

分子电子器件的研究是近期基础研究中受到极大关注的前沿热点[1-4]。带巯基的有机分子在金电极表面形成的自组装单分子膜(SAMs)及其电活性,是分子电子学领域具有代表性和研究最多的体系之一[5-13]。由于结构的特殊性和特征的光致异构化,偶氮苯衍生物具有对光和电的双重活性[14]     

Intramolecular Path Determination of Active Electrons on Push-Pull Oligocarbazole Dyes-Sensitized Solar Cells

Several push-pull oligocarbazole dye-sensitizers have been studied using theoretical methods in order to better understand the relationship between structural electronic or optical properties and intramolecular path of active electrons during the ionization and injection processes. DFT/TD-DFT calculations were performed on a series of five dye sensitizers. They differ by the presence of electron donating group (EDG) by inductive effect (noted+I) or electron releasing group (ERG) by mesomeric effect (noted+M) or electron withdrawing group by inductive effect (noted-I) on the pushed part of the dyes studied. Our work focused on the internal distribution of electrons in the different parts of dye that are the push/pull moieties and the π -bridge. The study concerned the ground state, the electronic transition process and the excited state. In each situation, the fragment acting in the ionization or transition phenomena were identified. In the ground state, the electrons of the push part appear to be the least bound because they have the highest probabilities of ionization. In the excited state, the ionized atoms are essentially positioned in the pushing part and some neighboring atoms of the bridge. In the electronic transition, the active atoms are located in the π -conjugated part but only on the side adjacent to the acceptor group. To arrive to this conclusion, we optimized the structures of the five dyes in their ground and excited states. We calculated the atomic charges, the wavelengths and intensities of electronic transitions in the visible domain, the reorganization energies as well as the oxidation potential. It appears that +M donor ligands improve the performance of a dye because the great distribution of atoms to be ionized in the push parts.     

RF system design and measurement of HIRF-CSRe

An RF system for the CSRe （cooling storage experimental ring） is designed and manufactured domestically. The present paper mainly describes the RF system design in five main sections： ferrite ring, RF cavity, RF generator, low level system and cavity cooling. The cavity is based on a type of coaxial resonator which is shorted at the end with one gap and loaded with domestic ferrite rings. The RF generator is designed in the push-pull mode and the low level control system is based on a DSP＋FGPA＋DDS＋USB interface and has three feedback loops. Finally we give the results of the measurement on our system.     

Singly and Doubly Quinoxaline-Fused BIII Subporphyrins

B-Phenyl B^III subporphyrin-α-diones prepared in a three-step reaction sequence from the parent subporphyrin were condensed with 1,2-diaminobenzenes to give the corresponding quinoxaline-fused subporphyrins in variable yields. Quinoxaline-fused B-phenyl-5,10,15-triphenyl B^III subporphyrin was transformed to the corresponding subporphyrin-α-dione in the same three-step reaction sequence, which was then condensed with 1,2-diaminobenzene to give doubly quinoxaline-fused subporphyrin. These quinoxaline-fused subporphyrins exhibit redshifted absorption and fluorescence spectra compared with the parent one. A singly quinoxaline-fused subporphyrin bearing three meso-bis(4-dimethylaminophenyl)aminophenyl substituents shows blueshifted fluorescence in less polar solvent, which has been ascribed to emission associated with charge recombination of intramolecular charge transfer (CT) state.     

具有推挽输出结构的三值TTL电路

本文分析了以电阻为负载的传统三值TTL反相器的缺点,借鉴二值TTL推挽输出级的结构,设计了三值TTL电路的推挽输出级.用SPICEⅡ对设计电路的计算机模拟表明,具有推挽输出结构的三值TTL电路具有较强的驱动能力及较快的工作速度.     

RF system design and measurement of HIRF-CSRe

An RF system for the CSRe (cooling storage experimental ring) is designed and manufactured domestically. The present paper mainly describes the RF system design in five main sections:ferrite ring, RF cavity, RF generator, low level system and cavity cooling. The cavity is based on a type of coaxial resonator which is shorted at the end with one gap and loaded with domestic ferrite rings. The RF generator is designed in the push-pull mode and the low level control system is based on a DSP+FGPA+DDS+USB interface and has three feedback loops. Finally we give the results of the measurement on our system.     

Tuning the Photophysical Properties of Push‐Pull Azaheterocyclic Chromophores by Protonation: A Brief Overview of a French‐Spanish‐Czech Project

Conjugated push‐pull molecules that incorporate nitrogen heterocycles as electron‐withdrawing units are interesting materials because of their luminescence properties. These chromophores can be easily and reversibly protonated at the nitrogen atom of the heterocyclic ring and this can cause dramatic color changes. White and multi‐color photoluminescence both in solution and in the solid state can be obtained by an accurate control of the amount of acid. Thus, with a suitable design these compounds have potential applications in the development of colorimetric pH sensors and the fabrication of OLEDs based on only one material. We provide here a brief overview of our collaborative efforts made in this area.