压力流驱动电色谱分析方法及其若干色谱行为

压力流驱动电色谱分析方法是一种新型色谱技术。它组合了ＨＰＬＣ和电泳两种技术，为分离提供了更多可控制的因素。介绍了压力流驱动电色谱的装置和毛细管电色谱柱的装置方法，从理论上讨论了影响电色谱分离的因素并用实验数据加以证明。最后尝试性地将电色谱法用于测定香蕉样品中萨索啉（Ｓａｌｓｏｌｉｎｏｌ）等的含量。     

Determination of decabromodiphenyl ether in sediments using selective pressurized liquid extraction followed by GC–NCI-MS

A method based on selective pressurized liquid extraction (SPLE) followed by gas chromatography–negative ion chemical ionization-mass spectrometry (GC–NCI-MS) has been evaluated for analysis of decabromodiphenyl ether (PBDE-209) in sediment samples. Instrumental operating conditions such as source temperature and system pressure were optimized in the NCI-MS system, giving an instrumental detection limit of 2 pg. The limit of determination of the entire SPLE–GC–NCI-MS procedure was around 50 pg g^–1 dry weight (dw), with repeatability of replicates between 4 and 21% relative standard deviation. Application of the method to 13 different river and marine sediment samples collected in Spain revealed that levels of decabromodiphenyl ether ranged between 2 and 132 ng g^–1 dry weight.     

大同烟煤增压富氧燃烧过程中硫、氯和氟的析出特性

利用高压热重结合傅里叶红外研究了大同烟煤在增压富氧燃烧过程中硫、氯和氟的释放行为,主要考察压力对其析出特性的影响。实验结果表明,压力的改变对煤中硫、氯和氟的迁移转化均有显著影响。随着压力的升高,黄铁矿硫向COS等中间产物的转化率逐渐增加,导致SO2的收率逐步上升,但在3 MPa时,燃煤SO2收率却有所降低。此外,压力升高后反应气氛中CO分压的增加促进了COS的生成,导致其收率逐渐上升。因为煤中有机氯析出和转化与挥发分的释放密切相关,所以高压下挥发分释放量的增加使得煤中有更多的有机氯析出并转化为HCl,而且压力升高后,挥发分燃烧速率和温度的升高促进了无机氟化物分解,HF生成量相应增加。此外,高压下水解反应的强化也提高了HF的收率。     

Optimization of Pressurized Liquid Extraction of Lycopodiaceae Alkaloids Obtained from Two Lycopodium Species

Alkaloids of the Lycopodiaceae family are of great interest to researchers due to their numerous properties and wide applications in medicine. They play a very important role mainly due to their potent antioxidant, antidepressant effects and a reversible ability to inhibit acetylcholinesterase (AChE) enzyme activity. This property is of immense importance due to the growing problem of an increasing number of patients with neurodegenerative diseases in developed countries and a lack of effective and efficient treatment for them. Numerous studies have shown that Lycopodiaceae alkaloids are a rich source of AChE inhibitors. In the obtaining of new therapeutic phytochemicals from plant material, the extraction process and its efficiency is crucial. Therefore, the aim of this work was to optimize the conditions of modern PLE to obtain bioactive alkaloids from two Lycopodium species: L. clavatum L. and L. annotinum L. Five different solvents of different polarity were used for prepared plant extracts in order to compare the alkaloid content in and thereby effectiveness of the entire extraction. PLE parameters were used based on multiple studies conducted that gave the highest alkaloids recovery. Crude extracts were purified using solid-phase extraction (SPE) on Oasis HLB cartridge and examined by HPLC/ESI-QTOF–MS of the highly abundant alkaloids. To the best of our knowledge, this is the first time such high recoveries have been obtained for known Lycopodiaceae alkaloids. The best extraction results of alkaloid-lycopodine were detected in the dichloromethane extract from L. clavatum, where the yield exceeded 45%. The high recovery of annotinine above 40% presented in L. annotinum was noticed in dichloromethane and ethyl acetate extracts. Moreover, chromatograms were obtained with all isolated alkaloids and the best separation and quality of the bands in methanolic extracts. Interestingly, no alkaloid amounts were detected in cyclohexane extracts belonging to the non-polar solvent. These results could be helpful for understanding and optimizing the best conditions for isolating potent AChE inhibitors.     

Fluidization characteristics of sawdust in a cold flow fluidized bed

India has abundance of biomass such as rice husk, bagasse, wheat straw, sawdust etc. which is used as a main or auxiliary fuel in the fluidized bed combustor, gasifier and pyrolizer. Design of such fluidized bed equipments require the knowledge of minimum fluidization velocity (U_mf), complete fluidization velocity (U_cf) and transport disengagement height (TDH). The present work reports the fluidization characteristic, U_mf, U_cf and TDH of the individual size groups of sawdust and mixture thereof. The results indicate that the U_mf and U_cf have a tendency to increase with increase in particle diameter, however the TDH shows the reverse trend. The sawdust particle size of 925 and 1200 ​μm showed significant difference between their U_mf and U_cf, an essential parameter for controlled fluidization. Based on the experimental work new correlations for the prediction of U_mf, U_cf and TDH for sawdust sample are proposed. The proposed correlations of U_mf, U_cf and TDH are in good agreement with experimental values and the deviations found within the range of nearly ±10% for all the samples.     

Effect of Gaussian size distribution width on minimum fluidization velocity in tapered gas–solid fluidized beds

This paper investigated the effect of Gaussian distribution width, average particle diameter, particle loading, and the tapered angle on minimum fluidization velocity (U_mf) by conducting extensive experiments in tapered fluidized beds. Three powders with Gaussian size distribution and different distribution widths were used in the experiments. An increase in U_mf with increasing the average particle diameter, particle loading, and the tapered angle was observed. There was also a nonmonotonic behavior of U_mf as the Gaussian distribution width increased. An empirical correlation including dimensionless groups for predicting U_mf in tapered beds was developed in which the effect of distribution width was considered. The proposed correlation predictions were in good agreement with the experimental data, with a maximum deviation of 16.5% and average and standard deviations of, respectively, 6.4% and 7.4%. The proposed correlation was also compared with three earlier models, and their accuracy was discussed.     

Extraction of Phenolic and Flavonoid Compounds from Mung Bean (Vigna radiata L.) Seed Coat by Pressurized Liquid Extraction

Mung bean seed coat (MBC) is a by-product of the mung bean processing industry. It contains a large number of phenolic compounds with therapeutic anti-inflammatory, anti-diabetic and antioxidant properties. This research aimed to investigate the optimum conditions for phenolic and flavonoid extraction from MBC by pressurized liquid extraction (PLE). Response surface methodology (RSM) was used to study the effects of temperature (80–160 °C), pressure (1200–1800 psi) and ethanol concentration (5–95%) on total phenolic content (TPC), total flavonoid content (TFC) and 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) scavenging activity (ABTS). Scale-up extraction was also performed. The optimum conditions for extraction were 160 °C, 1300 psi and 50% ethanol. Under optimum conditions, the TPC was 55.27 ± 1.14 mg gallic acid equivalent (GAE)/g MBC, TFC was 34.04 ± 0.72 mg catechin equivalent (CE)/g MBC and ABTS scavenging activity was 195.05 ± 2.29 mg trolox equivalent (TE)/g MBC. The TFC and ABTS scavenging activity of the extracts obtained at the pilot scale (10 L) was not significantly different from the laboratory scale, while TPC was significantly increased. The freeze-dried MBC extract contained vitexin and isovitexin 130.53 ± 17.89, 21.21 ± 3.22 mg/g extract, respectively. In conclusion, PLE was able to extract phenolics, flavonoids with ABTS scavenging activity from MBC with the prospect for future scale-up for food industry.     

颗粒物质的两个典型效应及其研究现状的分析

概述了颗粒物质领域中粮仓现象和巴西坚果效应两个典型现象及其解释理论，分析其理论的成功和不足之处，并给出了一些看法。     

小麦秸秆流态化燃烧粘结特性实验研究

在5 kW鼓泡流化床实验装置上,利用床层压差和温度的变化作为判断床层粘结失流的依据,以小麦秸秆成型颗粒作为研究对象,进行了燃烧温度、床料粒径和流化风速对失流时间影响的实验研究。实验结果表明:失流时间随着燃烧温度上升而缩短;流化风速增大,失流时间增长;床料粒径对失流时间影响不明显。对粘结物进行了SEM/EDX和XRF分析,分析结果表明,Si和K元素形成的熔融物对床料的粘结起重要的作用。     

吉林某弹药销毁场土壤炸药污染调查及其赋存状态研究

研究吉林某军事弹药销毁场土壤炸药污染程度以及炸药在土壤中的赋存状态,为炸药和重金属污染土壤修复提供针对性策略。采集了某弹药销毁厂焚烧销毁区表层土壤样品,分析了其理化性质和常见重金属元素含量,测试了土壤全样和不同颗粒度土壤样品中炸药污染物的含量,并结合热重-傅里叶变换红外光谱(TGA-FTIR) 对炸药污染土壤样品热力学行为的表征,探讨了炸药污染物的赋存状态,炸药和重金属组合污染特征等。土壤中含有高浓度的TNT、DNT、ADNT、RDX等炸药污染物及其降解产物,并表现出土壤细颗粒富集趋势,其中土壤全样中TNT总浓度达到了1.66×104 mg·kg-1,远远高于EPA推荐的土壤TNT指导限值,RDX超过了以土壤环境为目标的指导限值;销毁活动还造成了土壤中Pb、Cu、Zn重金属浓度的升高,分别为400 mg·kg-1,318 mg·kg-1,1030 mg·kg-1。土壤中受到重金属和有机质等因素的影响,土壤中经过长期老化的炸药污染物的热解行为明显不同于自由态的炸药分子,热解温度升高、过程延长。在销毁区炸药污染土壤的修复中,应加强炸药污染物与重金属相互作用的研究,并在修复治理实践中采取协同修复的策略。