Rhythmic pattern formations in gels and Matalon—Packter law: A fresh perspective

The periodic precipitation pattern formation in gelatinous media is interpreted as a moving boundary problem. The time law, spacing law and width law are revisited on the basis of the new scenario. The explicit dependence of the geometric structure on the initial concentrations of the reactants is derived. Matalon—Packter law, which relates the spacing coefficient with the initial concentrations is reformulated removing many ambiguities and impractical parameters. Experimental results are discussed to establish the significance of moving boundary concept in the diffusion controlled pattern forming systems     

表面活性剂对均相沉淀法制备单晶Ce2O(CO3)2￠H2O微粉形貌及 形成机理的影响

在尿素及硝酸铈的混合溶液中分别加入表面活性剂CTAB、 PEG19000、OP-10,利用均相沉淀法合成了不同形貌的CeO2超细前驱体Ce2O(COa)2·H2O,采用X射线衍射及透射电子显微镜等测试手段,对产品的物相和形貌进行了表征．实验结果表明,所得产品均为斜方晶系的单晶Ce2O(CO3)2·H2O,且表面活性剂的加入使晶体的晶化程度明显提高;添加不同的表面活性剂得到不同形貌尺寸的产物: 阳离子型表面活性剂CTAB对Ce2O(CO3)2·H2O晶体的形貌影响不大,所得产物尺寸变小,且分散性得到一定的改善;非离子型表面活性剂对所得产物的形貌影响显著．加入PEG19000和OP-10分别得到了形状排列有序的、尺寸较均匀的、较规则无团聚的微米棒及具有紧密结合中心的发散状的花样微粒．不同形貌前驱体的形成与晶粒形成生长机理的改变有关．     

从芒果皮中提取果胶的工艺研究

果胶是一种大分子多糖类物质 ,具有良好的胶凝作用 ,用途广泛 ,在国内外市场上的销量很好。 1 990年世界上果胶总产量约 2 5 0 0 0吨 ,而我国 1 990年仅在食品工业上消耗的果胶就达 1 0 0 0吨 ,但国内市场上销售的果胶大部分为进口货[1] 。果胶在我国的生产仍处于开发阶段 ,所以发掘新的提取资源、提高果胶质量、降低果胶生产成本的意义十分重大。目前 ,已有以柑桔皮、向日葵盘、苹果皮、香蕉皮、马铃薯渣为原料提取果胶的研究报道 ,如何从芒果皮中提取果胶却未见报道。芒果在制造罐头和饮料中副产大量下脚料———芒果皮 ,未能得到充分利用…     

Indirect automatic atomic absorption determination of sulphate based on its precipitation with barium

A continuous precipitation flame atomization atomic absorption spectrometric method for the indirect determination of sulphate is proposed. By using a reversed flow-injection configuration for precipitation as barium sulphate, this anion was determined in the range 10–150 g/ml, with a relative standard deviation of 2.6%. The sensitivity was increased by a factor of seven by using a nitrous oxide-acetylene flame to measure barium.     

Genetic engineering to enhance the selectivity of protein separations

The ability to recover and purify natural and recombinant proteins, and the costs of doing so remain a major task in introducing the potential products of biotechnology. The bases for separation range from specific binding onto tailored reagents to solubility and partitioning behavior governed by a mixed bag of size, charge, and hydrophobicity. In most cases, a combination of methods is used in sequence, and improvements in the selectivity at an early stage can enhance the effectiveness of subsequent (and usually more costly) steps. Genetic engineering provides a means of improving the selectivity within the context of existing separation methods. By this strategy, improvements in selectivity are sought by bestowing a distinctive property on the protein of interest. The primary sequence of amino acids is altered, such that the protein can be selectively removed from other components of the multicomponent mixture in which such products are commonly found. In this article, the range of these “distinctive properties” and their pairing with various separation methods will be reviewed. Specific examples from our work, in which a distinctive charge is provided via a polypeptide “purification” fusion tail, will be discussed. Separation methods we have used with these fusion proteins are precipitation, two-phase aqueous extraction, reversed micellar extraction, and ion exchange using both resins and membranes.     

碳酸氢铵沉淀法制备氧化钇粉体时反应条件对产物粒度的影响

研究了碳酸氢铵沉淀法的反应条件对氧化钇粒度的影响,探讨了粒度变化规律。发现在沉淀反应中,晶型碳酸钇铵的形成与否是影响氧化钇粒度的关键因素。在较低的反应温度下,当碳酸氢铵和氯化钇的浓度大于0.25mol·L-1,摩尔比大于5,陈化时间大于60min时得到碳酸钇铵沉淀,经煅烧可获得粒度(D50)大于1μm的氧化钇。当反应物浓度较低、摩尔比小,陈化时间较短时得到无定型碳酸钇沉淀,煅烧沉淀可获得粒度(D50)小于0.5μm的氧化钇。实验证明选择适当的沉淀反应条件,可制备D50在0.3～10μm范围内的不同粒度级别的氧化钇粉体。     

琼脂凝胶中形成铬酸铅周期性沉淀的机理研究

选择硝酸铅和铬酸钾作为相互扩散的反应物以形成铬酸铅在琼脂凝胶中的周期性沉淀．分别在光照和黑暗中对六种不同浓度的硝酸铅溶液进行了实验．根据实验现象对周期性沉淀的形成提出了可能的机理．认为光辐射可使铬酸铅部分电离，从而减慢了胶核成长速率，有利于汇聚成带．     

Rapid quantification of HIV protease inhibitors in human plasma by high-performance liquid chromatography coupled with electrospray ionization tandem mass spectrometry

HIV protease inhibitors are important antiretroviral drugs which have substantially reduced the morbidity and mortality associated with HIV-1 infection. Recent data have shown relationships between plasma concentrations of the protease inhibitors and clinical response, which makes therapeutic drug monitoring valuable. We have developed and validated an assay, using liquid chromatography coupled with electrospray tandem mass spectrometry (LC/MS/MS), for the routine quantification of the six licensed protease inhibitors (amprenavir, indinavir, lopinavir, nelfinavir, ritonavir and saquinavir) and the pharmacologically active nelfinavir metabolite M8 in plasma. The sample pretreatment consisted of protein precipitation with a mixture of methanol and acetronitrile using only 100 microl of plasma. Chromatographic separation was performed on an Inertsil ODS3 column (50 x 2.0 mm i.d., particle size 5 microm), with a quick stepwise gradient using an acetate buffer (pH 5) and methanol, at a flow rate of 0.5 ml min(-1). The analytical run time was 5.5 min. The use of a 96-well plate autosampler allowed batch sizes up to 150 patient samples. The triple-quadrupole mass spectrometer was operated in the positive ion mode and multiple reaction monitoring was used for drug quantification. The method was validated over the concentration ranges 0.01-10 microg ml(-1) for indinavir and saquinavir, 0.1-10 microg ml(-1) for amprenavir, 0.05-10 microg ml(-1) for nelfinavir and ritonavir, 0.1-20 microg ml(-1) for lopinavir and 0.01-5 microg ml(-1) for M8. Saquinavir-d(5) and indinavir-d(6) were used as internal standards. The coefficients of variation were always <10% for both intra-day and inter-day precisions for each compound. Mean accuracies were also between the designated limits (+/-15%). The validated concentration ranges proved to be adequate in daily practice. This robust and fast LC/MS/MS assay is now successfully applied for routine therapeutic drug monitoring and pharmacokinetic studies in our hospital.     

Quantitative validation of different protein precipitation methods in proteome analysis of blood platelets

For the preparation of proteins for proteome analysis, precipitation is frequently used to concentrate proteins and to remove interfering compounds. Various methods for protein precipitation are applied, which rely on different chemical principles. This study compares the changes in the protein composition of human blood platelet extracts after precipitation with ethanol (EtOH) or trichloroacetic acid (TCA). Both methods yielded the same amount of proteins from the platelet preparations. However, the EtOH-precipitated samples had to be dialyzed because of the considerable salt content. To characterize single platelet proteins, samples were analyzed by two-dimensional fluorescence differential gel electrophoresis. More than 90% of all the spots were equally present in the EtOH- and TCA-precipitated samples. However, both precipitation methods showed a smaller correlation with nonprecipitated samples (EtOH 74.9%, TCA 79.2%). Several proteins were either reduced or relatively enriched in the precipitated samples. The proteins varied randomly in molecular weight and isoelectric point. This study shows that protein precipitation leads to specific changes in the protein composition of proteomics samples. This depends more on the specific structure of the protein than on the precipitating agent used in the experiment.     

Preparation of poly(N‐ethyl methacrylamide) particles via an emulsion/precipitation process: The role of the crosslinker

Monodisperse, thermosensitive poly(N‐ethyl methacrylamide) microgel particles were prepared by the batch precipitation/emulsion polymerization of water‐soluble N‐ethyl methacrylamide and the hydrophobic crosslinker ethylene glycol dimethacrylate initiated by potassium persulfate. Particular attention was paid to the effect of the crosslinker agent on the polymerization process (kinetics, conversion, and water‐soluble oligomer content). Particles were characterized in terms of their size distribution and swelling capacity. A polymerization mechanism for the water‐soluble monomer and non‐water‐soluble crosslinker is proposed and discussed on the basis of a combination of both emulsion and precipitation polymerization processes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1808–1817, 2002