Efficient synthesis of branched poly(acrylic acid) derivatives via postpolymerization modification

The utility of pentafluorophenyl esters for the selective introduction of functional units and branch points in well-defined poly(acrylic acid) (PAA) derivatives is demonstrated using a combination of controlled radical polymerization and postpolymerization modification. Reversible addition-fragmentation chain transfer enables the synthesis of well-defined copolymers—poly(pentafluorophenyl acrylate-co-tert-butyl acrylate)—with the active ester repeat units serving as attachment points for reaction with primary amines, specifically tris(2-(t-butoxycarbonyl)ethyl)methyl amine (Behera's amine). Deprotection using trifluoroacetic acid removes both the backbone and side chain t-butyl esters to give a series of branched PAA derivatives containing novel tricarboxylic acid side chains that are well suited to complexation and multidentate interactions. Surprisingly, the active ester homopolymer is shown to have the highest reactivity with Behera's amine when compared to copolymers with lower incorporation of pentafluorophenyl esters, suggesting an intriguing interplay of neighboring group effects and steric interactions. The ability to tune the efficiency of postpolymerization modification gives a library of PAA derivatives.     

Precision PEGylated Polymers Obtained by Sequence‐Controlled Copolymerization and Postpolymerization Modification

Copolymers containing water‐soluble poly(ethylene glycol) (PEG) side chains and precisely controlled functional microstructures were synthesized by sequence‐controlled copolymerization of donor and acceptor comonomers, that is, styrene derivatives and N‐substituted maleimides. Two routes were compared for the preparation of these structures: a) the direct use of a PEG–styrene macromonomer as a donor comonomer, and b) the use of an alkyne‐functionalized styrenic comonomer, which was PEGylated by copper‐catalyzed alkyne–azide cycloaddition after polymerization. The latter method was found to be the most versatile and enabled the synthesis of high‐precision copolymers. For example, PEGylated copolymers containing precisely positioned fluorescent (e.g. pyrene), switchable (e.g. azobenzene), and reactive functionalities (e.g. an activated ester) were prepared.     

Knowledge‐based choice of the initiator type for monomer removal by postpolymerization

The mechanisms involved in monomer removal by postpolymerization were investigated to establish a criterion to select the most effective initiator systems. Three redox systems yielding radicals of different hydrophobicities were studied. Efficiency in monomer removal by postpolymerization increased with the hydrophobicity of the radical formed from the initiator system. This result was independent of the water solubility of the residual monomer. The mechanistic reasons for this finding are discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4245–4249, 2002     

Divergent strategy for the synthesis of bottlebrush polymers via postpolymerization modification of macromonomer

A simple and divergent synthetic strategy of bottlebrush polymers (BBPs) is presented, consisting of postpolymerization modification of a macromonomer and grafting-through polymerization. Beginning with a single macromonomer, its direct modification could build a library of macromonomers with an identical chain length, thus guaranteeing the precision in the synthesis of BBPs. In this study, a newly designed norbornenyl-terminated poly(methyl acrylate) (NB-PMA) is proposed as a chemically robust template. Ti-mediated transesterification of NB-PMA successfully produces structurally diverse polyacrylates while maintaining the terminal norbornenyl group intact. All macromonomers obtained from transesterification possess a good grafting-through ring-opening metathesis polymerization reactivity, furnishing homo, random, and block BBPs in a controllable manner. Moreover, atomic force microscopy analysis supports the controlled side-chain length distribution in the resulting BBPs.     

Photocaged pendent thiol polymer brush surfaces for postpolymerization modifications via thiol‐click chemistry

In this work, a postpolymerization surface modification approach is reported that provides pendent thiol functionality along the polymer brush backbone using the photolabile protection chemistry of both o‐nitrobenzyl and p‐methoxyphenacyl thioethers. Poly(2‐hydroxyethyl methacrylate) (pHEMA) brushes were synthesized via surface‐initiated atom transfer radical polymerization, after which the pHEMA hydroxyl groups were esterified with 3‐(2‐nitrobenzylthio)propanoic acid or 3‐(2‐(4‐methoxyphenyl)‐2‐oxoethylthio)propanoic acid to provide the photolabile protected pendent thiols. Addressing the protecting groups with light not only affords spatial control of reactive thiol functionality but enables a plethora of thiol‐mediated transformations with isocyanates and maleimides providing a modular route to create functional polymer surfaces. This concept was extended to block copolymer brush architectures enabling the modification of the chemical functionality of both the inner and outer blocks of the block copolymer surface. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Direct transesterification of poly(methyl acrylate) for functional polyacrylate syntheses

Post‐polymerization modification is an important synthetic method to produce macromolecules with various chemical and physical properties. With this technique, functional groups of polymer molecules within the same structural scaffold can be varied, and thus, accurate research on structure‐property relationships is possible. To add practicality, the direct post‐polymerization of commodity polymers has been pursued, but only limited success has been realized. In this report, a study on various transesterification methods for the synthesis of functional polyacrylates beginning with a poly(methyl acrylate) (PMA), one common acrylate polymer, is presented. The Zn‐based catalytic system, a combination of Zn₄(OCOCF₃)₆O and 4‐dimethylaminopyridine with instant methanol removal, exhibited the highest reactivity among many catalysts and conditions. Assorted alcohols were reacted with PMA to produce the corresponding polyacrylates. This method was successfully extended to post‐polymerization modification of a PMA‐containing block copolymer, PS‐b‐PMA and synthesis of acrylate copolymers with functional group density control. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2554–2560     

“Click” Incorporation of Radical/Ionic Sites into a Reactive Block Copolymer: A Facile and On‐Demand Domain Functionalization Approach toward Organic Resistive Memory

Reversible addition‐fragmentation chain transfer polymerization yields reactive block copolymers bearing the pentafluorophenyl ester (PFPA) group, and subsequent Click amidation using 2,2,6,6‐tetramethylpiperidine‐N‐oxyl‐ and imidazolium‐functionalized primary amines produces the corresponding functional block copolymers, leading to installation of statistical radical‐ and ionic sites into the PFPA segment. The monolayered thin film devices fabricated using the obtained block copolymers exhibit repeatable switching of electric conductivity (on/off ratio > 10³) under a bias voltage, which reveals that the coexistence of radicals and ions in the same spherical domain of the copolymer layer is a prerequisite for repeatable switching memory.

     

Sandwich structure containing liquid crystal polymer grafted on polymer support

Graft post-polymerization of mesogenic monomers onto fluorine-containing polymer support was initiated by the simultaneous action of vacuum ultraviolet radiation and atomic oxygen. The resultant two-layer structure possesses the combined physical–mechanical properties of the polymer-supporting film and the optical characteristics of the anisotropic liquid crystal layer.     

Double hydrophilic block copolymers of sodium(2‐sulfamate‐3‐carboxylate)isoprene and ethylene oxide

Poly(sodium(2‐sulfamate‐3‐carboxylate)isoprene)‐b‐poly(ethylene oxide) and poly(ethylene oxide)‐b‐poly(sodium(2‐sulfamate‐1‐carboxylate)isoprene)‐b‐poly(ethylene oxide) double hydrophilic block copolymers were prepared by selective post polymerization reaction of the polyisoprene block, of poly(isoprene‐b‐ethylene oxide) diblocks or poly(ethylene oxide‐b‐isoprene‐b‐ethylene oxide) triblock precursors, with N‐chlorosulfonyl isocyanate. The precursors were synthesized by anionic polymerization high vacuum techniques and had narrow molecular weight distributions and predictable molecular weights and compositions. The resulting double hydrophilic block copolymers were characterized by FTIR and potentiometric titrations in terms of the incorporated functional groups. Their properties in aqueous solutions were studied by viscometry and dynamic light scattering. The latter techniques revealed a complex dilute solution behavior of the novel block copolymers, resulting from the polyelectrolyte character of the functionalized PI block and showing a dependence on solution ionic strength and pH. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 606–613, 2006     

Tunable light‐harvesting polymers containing embedded dipolar chromophores for polymer solar cell applications

A series of light‐harvesting conjugated polymers were designed and synthesized for polymer solar cells. These newly designed polymers comprise an unusual two‐dimensional conjugated structure with an electron‐rich thiophene–triphenylamine backbone and stable planar indacenodithiophene π‐bridges terminated with tunable electron acceptors. It was found that the electron‐withdrawing strength of the acceptor could be used to manipulate the energy level of the lowest unoccupied molecular orbital and bandgap (as much as 0.3 eV), generating derivatives with complementary absorbance in the visible spectrum. This approach provides great flexibility in fine tuning the electronic and optical properties of the resultant polymers and facilitates the investigation of how these chemical modifications alter the subsequent photovoltaic properties of these materials. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012