Pre-irradiation induced grafting of styrene into crosslinked and non-crosslinked polytetrafluoroethylene films for polymer electrolyte fuel cell applications. II: Characterization of the styrene grafted films

Crosslinked and non-crosslinked polytetrafluoroethylene films (RX-PTFE and V-PTFE films, respectively) were irradiated by γ-ray and then grafted with styrene in liquid phase. Microscope FT-IR spectroscopy, TGA, solid state ¹³C CP/MAS and high resolution HS/MAS NMR spectroscopy, wide-angle X-ray diffraction (WAXD) study were used to get the structural information of the styrene grafted RX-PTFE and V-PTFE films. From microscope FT-IR spectra of the grafted RX-PTFE films, the “grafting front mechanism” was proved. TGA analysis showed that the grafted films have a small degradation step and two main degradation steps. In the ¹³C CP/MAS NMR spectra of the non-grafted films, there are no signal due to the absence of the hydrogen atom. While in the spectra of the grafted films, there are signals attributed to the polystyrene grafts. In the ¹³C HS/MAS NMR spectra of the grafted films, the relative intensity of the peaks attributed to the polystyrene grafts increased while the relative intensity of the peak attributed to PTFE matrix decreased with the increase in the DOG. From WAXD patterns, the intensity of the crystalline peak decrease with the increase in the DOG. The grafted films were sulfonated by chlorosulfonic acid and the results of highest IEC value exceeded 3.0. Those results will be reported in the near future.     

Preparation and characterization of polytetrafluoroethylene‐polyacrylate core–shell nanoparticles

Polytetrafluoroethylene (PTFE)‐polyacrylate core–shell nanoparticles were produced by using PTFE micropowder and acrylate via seeded emulsion polymerization in the presence of fluorosurfactant. The properties of emulsion under various polymerization conditions were investigated and optimized. The chemical composition of the PTFE‐polyacrylate nanoparticles was characterized by Fourier‐transform infrared spectrometry (FTIR). The particle size and core–shell structure of the resulting PTFE‐polyacrylate nanoparticles were confirmed by transmission electron microscopy (TEM). Wettability of the PTFE‐polyacrylate core–shell particles was higher than the pristine PTFE. The formation of this kind of PTFE‐polyacrylate core–shell nanoparticles could improve the compatibility of PTFE with other materials because PTFE is covered by polyacrylate shell, which make them promising in various fields. Copyright © 2007 John Wiley & Sons, Ltd.     

Exhaled breath condensate: Determination of non-volatile compounds and their potential for clinical diagnosis and monitoring. A review

Exhaled breath condensate is a promising, non-invasive, diagnostic sample obtained by condensation of exhaled breath. Starting from a historical perspective of early attempts of breath testing towards the contemporary state-of-the-art breath analysis, this review article focuses mainly on the progress in determination of non-volatile compounds in exhaled breath condensate. The mechanisms by which the aerosols/droplets of non-volatile compounds are formed in the airways are discussed with methodological consequences for sampling. Dilution of respiratory droplets is a major problem for correct clinical interpretation of the measured data and there is an urgent need for standardization of EBC. This applies also for collection instrumentation and therefore various commercial and in-house built devices are described and compared with regard to their design, function and collection parameters. The analytical techniques and methods for determination of non-volatile compounds as potential markers of oxidative stress and lung inflammation are scrutinized with an emphasis on method suitability, sensitivity and appropriateness. The relevance of clinical findings for each group of possible non-volatile markers of selected pulmonary diseases and methodological recommendations with emphasis on interdisciplinary collaboration that is essential for future development into a fully validated clinical diagnostic tool are given.     

Quantum-chemical study of C<Subscript>n</Subscript>F2<Subscript><Emphasis Type="Italic">n</Emphasis>+2</Subscript> conformers. Structure and IR spectra

Quantum-chemical calculations of the geometrical structure and vibrational spectra of C_nF_2n+2 oligomers (n = 5–8) in the chain and branched conformations are reported. The lengthening of the chain of C_nF_2n+2 does not substantially affect the geometrical parameters of the oligomers. In all cases under study, the most optimal structure of the molecule is a zigzag chain with bond lengths R(C-C) = 1.53 –1.54 and R(C-F) = 1.36 –1.34 ; the chain is rolled into a helix, which makes an angle of 17° with the plane. The IR spectra are sensitive to the structural deficiency of oligomers C_nF_2n+2 associated with the lateral trifluoromethyl groups formed in the chain; the spectra can be used for revealing defects of this type in the structure of polytetrafluoroethylene (PTFE). The possibility of defects associated with the lateral CF₃ groups in the structure of PTFE and its low-temperature modifications is explained based on the calculated total energies of C_nF2 _n+2.Original Russian Text Copyright © 2004 by L. N. Ignatieva, A. Yu. Beloliptsev, S. G. Kozlova, and V. M. BuznikTranslated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 4, pp. 632–643, July–August, 2004.This revised version was published online in April 2005 with a corrected cover date.     

磺化改性聚四氟乙烯纤维固相萃取-高效液相色谱联用测定奶制品中的三聚氰胺

采用新型固相萃取材料磺化的甲基丙烯酸缩水甘油酯接枝聚四氟乙烯（PTFE-g-GMA-SO3H）纤维填充微柱预富集和流动注射(FI)与高效液相色谱(HPLC)联用测定样品中痕量的三聚氰胺。 建立了以该纤维作为吸附剂在线测定奶制品中三聚氰胺的新方法。 对三聚氰胺的富集与洗脱条件进行了优化,并得出三聚氰胺的分析特性：该方法对三聚氰胺的检出限为1.13×10-2 mg/L,富集倍数为300,RSD为7.6%（n=9,三聚氰胺质量浓度为0.2 mg/L）。 该方法应用于2种奶制品中的痕量三聚氰胺的测定,样品加标回收率分别为98%和102.5%。     

Effect of atomic oxygen irradiation on the structural and tribological characteristics of polytetrafluoroethylene and its composites

Based on the ground‐based simulation facility, the effects of atomic oxygen (AO) irradiation on the structural and tribological properties of pure polytetrafluoroethylene (PTFE) and carbon fiber and MoS₂‐filled PTFE composites were studied by scanning electron microscopy, X‐ray photoelectron spectroscopy, and a ball‐on‐disc tribometer. The results shown that AO irradiation had significant effects on the structural and tribological properties of pure PTFE, in which the surface morphologies, mass loss, friction coefficient, and wear rate had been changed greatly after AO irradiation. However, it was noticeable that the addition of carbon fiber and MoS₂ filler to PTFE could improve the AO resist capacity and tribological properties of PTFE composites significantly. Copyright © 2016 John Wiley & Sons, Ltd.     

Tin oxide coating on polytetrafluoroethylene films in aqueous solutions

Polytetrafluoroethylene (PTFE) films were successfully coated with tin oxide in aqueous solutions. Tin oxide was crystallized in the solution and formed nanocrystal coatings on the polymer films. The coatings consisted of SnO₂ and SnO crystals. They were assemblies of tin oxide nanosheet of about 10 to 50 nm in size and about 5 nm in thickness. The nanocrystal films can be exfoliated from the PTFE substrates. Tin oxide nanocrystal films had a rough liquid surface and a dense substrate‐side surface. Transparency of PTFE films coated with tin oxide was same as that of bare PTFE films in the range from 400 to 800 nm. The PTFE films coated with tin oxide nanocrystals can be pasted on desired substrates. Copyright © 2009 John Wiley & Sons, Ltd.     

聚四氟乙烯对齿轮润滑成膜膏润滑性能的影响

作者以聚四氟乙烯(PTFE)为固体润滑剂填料对GM型齿轮润滑成膜膏进行了改进,并且研制出了两种新的成膜膏系列产品。经四球试验机、动静摩擦系数精密测定仪和SRV试验机评价的结果表明,添加PTFE的GM-2型成膜膏的承载能力和减磨性能都明显地比未添加的好;以PTFE为主要固体润滑剂填料的GM-3和MFC-1型两种润滑成膜膏也都具有良好的润滑性能,其中后者的性能与含PTFE的GM-2型成膜膏的接近。通过对摩擦轨迹的电子探针检测发现,PTFE在摩擦过程中于摩擦表面形成了转移膜,因而改善了润滑成膜膏的摩擦学性能。     

Structural and Tribological Properties of Polytetrafluoroethylene Composites Filled with Glass Fiber and Al2O3 in Atomic Oxygen Environment

Effects of atomic oxygen (AO) irradiation on the structural and tribological behaviors of polytetrafluoroethylene (PTFE) composites filled with both glass fibers and Al₂O₃ were investigated in a ground-based simulation facility, in which the average energy of AO was about 5 eV and the flux was 5.0 × 10¹⁵/cm² s. It was found that AO irradiation first induced the degradation of PTFE molecular chains on the sample surface, and then resulted in a change of surface morphology. The addition of Al₂O₃ filler significantly increased the AO resistance property of PTFE composites. Friction and wear tests indicated that AO irradiation affected the wear rate and increased the friction coefficient of specimens. The PTFE composite containing 10% Al₂O₃ exhibit the best AO resistance and lower wear rate after long time AO irradiation.