Insoluble polystyrene-bound quaternary onium salt catalysts for the synthesis of cyclic carbonates by the reaction of oxiranes with carbon dioxide

The addition reaction of oxiranes ( 26a—e ) with carbon dioxide (CO₂) was performed using insoluble polystyrene beads containing pendant quaternary ammonium or phosphonium salts as catalysts under atmospheric pressure. The reaction of 26a—e with CO₂ proceeded smoothly catalyzed by 1–2 mol % of the polymer-supported quaternary onium salts to give the corresponding cyclic carbonates ( 27a—e ) in high yields at 80–90°C. In this reaction system, the catalytic activity of the polymer-supported quaternary onium salts was strongly affected by the following factors: degree of ring substitution (DRS) of the onium salt residues to the polymer, degree of crosslinking (DC) of the polystyrene beads, chain length of the alkylene spacer between the polymer back-bone and the onium salt, hydrophobicity of the alkyl group on the onium salts, and kind of onium salts. That is, the polymer-supported quaternary phosphonium salts with low DRS and DC and with long alkylene spacer chain were found to have higher catalytic activity than low molecualr weight quaternary onium salts. The above polymer-supported catalysts can easily be separated at the end of a reaction by filtration and can be reused for at least seven runs. It was also found that the rate of reaction was proportional to the products of catalyst concentration and oxirane concentration. © 1993 John Wiley & Sons, Inc.     

Phase-transfer catalytic activity of soluble polystyrenes containing crown ether moieties and hydroxyl groups adjacent to the macrorings

Soluble polystyrenes with crown ether structures and hydroxyl groups adjacent to the macrorings were prepared by the reaction of epoxide-containing polystyrenes with monoaza-15-crown-5 or monoaza-18-crown-6. Rate of formation of the polymer-bound alkali cation-crown alkoxide ion pair from the soluble polystyrenes and aqueous NaOH or KOH depended on the loading of crown ether and hydroxyl units and on the size of the macroring. The elimination of HCl from less reactive 2-chloroethylbenzene with aqueous NaOH or KOH in the presence of the soluble polystyrene catalysts under two-phase conditions was limited mainly by the intrinsic reaction rate. The elimination of HBr from more reactive 2-bromoethylbenzene in the presence of the less (11%) ring-substituted polymer catalyst with 18-crown unit was limited by the alkoxide formation rate. © 1994 John Wiley & Sons, Inc.     

Intramolecular oxyselenenylation and deselenenylation reactions in water, conducted by employing polymer-supported arylselenenyl bromide

After immobilizing arylselenenyl bromide on polymer resin, the oxyselenenylation reaction of olefin was carried out in water. An amphiphilic polymer-supported arylselenenyl bromide was employed, and various intramolecular oxyselenenylation and deselenenylation reactions proceeded smoothly in water in fair chemical yields (up to an 83% yield).     

Soluble polymer-supported catalysts containing pendant quaternary onium salts for the addition reaction of oxiranes with carbon dioxide

The addition reaction of oxiranes ( 15a-d ) with carbon dioxide (CO₂) was carried out using 1 mol % of soluble polymer-supported quaternary onium salts as catalysts under atmospheric pressure. The reaction of 15a-d with CO₂ proceeded very smoothly to give the corresponding five-membered cyclic carbonates ( 16a-d ) in high yields at 90-100°C. The catalytic activity of the soluble polymer-supported quaternary onium salts was strongly affected by the following factors: kind of reaction solvent, degree of introduction of the pendant onium salt residues in the polymer chain, and type of alkyl group on the onium salts due to the balance between lipophilicity and steric hindrance of the onium salt residue. Furthermore, these soluble polymer-supported quaternary onium salts were found ordinarily to have higher catalytic activity than low molecular weight quaternary onium salts under the same reaction conditions. It was also found that the rate of reaction was proportional both to catalyst concentration and to oxirane concentration. © 1995 John Wiley & Sons, Inc.     

负载锰卟啉催化乙酰胆固醇的选择性环氧化

多相金属卟啉催化剂已经被用于普通烯烃的环氧化,如表面修饰的多孔分子筛(MCM 41)[1 3],本文制备了高分子负载型锰卟啉用作胆固醇的非对映选择性环氧化催化剂。转化率可达100%,β选择性可达99%。1　实验部分乙酰胆固醇按文献[4]合成。溶剂均为AR级,按文献方法纯化。将Merrifield sPeptideresin(Aldrich,2%,交联度,200-400目,≈2mmolCl/g)加入到精制的DMF中,室温下放置24h,加入5-(对羟基苯基)-10,15,20-三(对甲基苯基)卟啉及无水K2CO3,N2保护下,80℃反应6h,洗涤干燥得到催化剂[1](图1)。催化环氧化反应　将PhIO及催化剂按化学计…     

Synthesis of Piperidine Nucleosides as Conformationally Restricted Immucillin Mimics

The de novo synthesis of piperidine nucleosides from our homologating agent 5,6-dihydro-1,4-dithiin is herein reported. The structure and conformation of nucleosides were conceived to faithfully resemble the well-known nucleoside drugs Immucillins H and A in their bioactive conformation. NMR analysis of the synthesized compounds confirmed that they adopt an iminosugar conformation bearing the nucleobases and the hydroxyl groups in the appropriate orientation.     

A Nonenzymatic Kinetic Resolution of (±)-trans-2-Arylcyclohexanols via Esterification Using Polymer-Supported DCC,DMAP, and 3β-Acetoxyetienic Acid

A nonenzymatic kinetic resolution of (±)-trans-2-arylcyclohexanols was carried out by esterification using polymer-supported N,N′-dicyclohexylcarbodiimide (DCC), dimethylaminopyridine (DMAP), and 3β-acetoxyetienic acid. The efficiency of the kinetic resolution was comparable to the enzymatic method when arylcyclohexanols bearing a condensed-aromatic ring were used.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communication® to view the free supplemental file.     

Synthesis of Cyclohexene Carbonate Catalyzed by Polymer-Supported Catalysts

A series of polystyrene-divinylbenzene cross-linked resin (PS)–supported zinc chloride catalysts were prepared in this study. They can efficiently catalyze the solventless cycloaddition of cyclohexene oxide with carbon dioxide in the presence of tetrabutylammonium bromide (TBAB) as cocatalyst under relatively mild reaction conditions. The catalyst is composed of carrier, connecting arm, ligand, and active ingredient. The connecting arms of different lengths can significantly affect the catalytic activity. Among these catalysts, the one using diethylene glycol as connecting arm and 2-aminopyridine as ligand, named PS-DEG-2ap-ZnCl₂, showed the optimal catalytic performance. The yield of cyclohexene carbonate was 95.18% calculated by gas chromatographic analysis under the optimal conditions (393 K, 5 MPa, 6 h). Moreover, the catalyst showed good stability and reusability. From the viewpoint of industrial application, the catalyst is attractive because of its excellent catalytic efficiency on the synthesis of cyclohexene carbonate.     

A novel covalent functionalisation of poly (styrene-alt-maleic anhydride) with 4-amino benzo-9-crown-3 ether

The grafting of 4-amino benzo-9-crown-3 ether to poly (styrene-alt-maleic anhydride) has been described. The covalent grafting of crown ether has led to a considerable increase in the solubility of polymer in organic solvents such as dimethyl sulphoxide, dimethylformamide and tetrahydrofuran. The highest solubility was attained in DMF and DMSO. The covalently bonded 4-benzo-9-crown-3 ether allowed the hosting of Li⁺. The covalently grafted crown ether to polymer was identified by infrared spectroscopy and thermogravimetric analysis methods.     

Preparation of styrene–divinyl benzene copolymer-supported platinum complexes and their catalytic properties in hydrosilylation

A new type of catalyst for the hydrosilylation of unsaturated monomers with dichloromethylsilane (DCMS) was prepared, which consisted of thiolmethylene-substituted styrene–divinyl benzene copolymer and platinum. When using DCMS as a hydrosilylation agent, these catalysts showed a high activity in the hydrosilylation of vinyl and acetylene monomers as styrene, alkyl vinyl silanes, acetylene, phenyl acetylene, butyl acrylate. The activities of catalysts were not significantly reduced even after 20 reuse cycles.