2‐Cyanoprop‐2‐yl dithiobenzoate mediated reversible addition–fragmentation chain transfer polymerization of acrylonitrile targeting a polymer with a higher molecular weight

The reversible addition–fragmentation chain transfer (RAFT) polymerization of acrylonitrile (AN) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was first applied to synthesize polyacrylonitrile (PAN) with a high molecular weight up to 32,800 and a polydispersity index as low as 1.29. The key to success was ascribed to the optimization of the experimental conditions to increase the fragmentation reaction efficiency of the intermediate radical. In accordance with the atom transfer radical polymerization of AN, ethylene carbonate was also a better solvent candidate for providing higher controlled/living RAFT polymerization behaviors than dimethylformamide and dimethyl sulfoxide. The various experimental parameters, including the temperature, the molar ratio of dithiobenzoate to the initiator, the molar ratio of the monomer to dithiobenzoate, the monomer concentration, and the addition of the comonomer, were varied to improve the control of the molecular weight and polydispersity index. The molecular weights of PANs were validated by gel permeation chromatography along with a universal calibration procedure and intrinsic viscosity measurements. ¹H NMR analysis confirmed the high chain‐end functionality of the resultant polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1272–1281, 2007     

Electrical and photoelectrical studies of plasma polymerized acrylonitrile

The electrical and photoelectrical properties of plasma polymerized acrylonitrile (PAN) are reported. The polymer films were studied in silver-PAN-silver systems. Electrical conductivity at room temperature was of the order of 10⁻¹¹ ohm⁻¹ cm⁻¹. The space charge limited current (SCLC) studies at room temperature and thermally stimulated current studies (TSC) over a temperature range of 290–500°K led to a clear understanding of carrier concentration, carrier mobility, trapping levels and activation energies. Photoelectric measurements were used to draw a band picture in plasma depositedPAN.     

Behaviors and mechanisms of copper adsorption on hydrolyzed polyacrylonitrile fibers

Polyacrylonitrile fiber (PANF) was hydrolyzed in a solution of sodium hydroxide and the hydrolyzed polyacrylonitrile fiber (HPANF) was used as an adsorbent to remove copper ions from aqueous solution. Scanning electron microscopy (SEM) showed that the hydrolysis process made the surface of HPANF rougher than that of PANF. Fourier transform infrared (FTIR) spectroscopy revealed that the HPANF contained conjugated imine (-Cz=Nz-) sequences. Batch adsorption results indicated that the HPANF was very effective in adsorbing copper, and the adsorption equilibrium could be reached within 10-20 min. Atomic force microscopy (AFM) showed that some aggregates formed on the surface of the HPANF after copper ion adsorption and the average surface roughness (R(a)) value of the HPANF changed from 0.363 to 3.763 nm due to copper adsorption. FTIR analysis indicated that copper adsorption caused a decrease of the light adsorption intensity of the imine (-Cz=Nz-) groups at 1573 and 1406 cm(-1) wavenumbers, and X-ray photoelectron spectroscopy (XPS) showed that the binding energy (BE) of some of the nitrogen atoms in the HPANF increased to a greater value due to copper adsorption. The FTIR and XPS results suggest that the adsorption of copper ions to the HPANF is attributed to the imine groups on the surface of the HPANF.     

In Situ Nitrogen Retention of Carbon Anode for Enhancing the Electrochemical Performance for Sodium-Ion Battery

Retaining nitrogen for polyacrylonitrile (PAN) based carbon anode is a cost-effective way to make full use of the advantages of PAN for sodium-ion batteries (SIBs). Here, a simple strategy has been successfully adopted to retain N atoms in situ and increase production yield of a novel composite PAZ by mixing 3 wt % of zinc borate (ZB) with poly (acrylonitrile-co-itaconic acid) (PANIA). Among the prepared carbonised fibre (CF) samples, PAZ-CF-700 maintains the highest N content, retaining 90 % of the original N from PANIA. It represents the highest capacity storage contribution (80.55 %) and the lowest impedance R_ct (117 Ω). Consequently, the specific capacity increases from 60 mAh g⁻¹ of PANIA-CF-700 to 190 mAh g⁻¹ of PAZ-CF-700 at a current density of 100 mA g⁻¹. At the same time, PAZ-CF-700 exhibits a good rate performance and excellent long-term cycling stability with a specific capacity of 94 mAh g⁻¹ after 4000 cycles at 1.6 A g⁻¹.     

Melt spinning of propylene carbonate‐plasticized poly(acrylonitrile)‐co‐poly(methyl acrylate)

The primary use of poly(acrylonitrile) (PAN) fibers, commonly referred to as acrylic fibers, is in textile applications like clothing, furniture, carpets, and awnings. All commercially available PAN fibers are processed by solution spinning; however, alternative, more cost‐effective processes like melt spinning are still highly desired. Here, the melt spinning of PAN‐co‐poly(methyl acrylate) (PMA) plasticized with propylene carbonate (PC) at 175°C is reported. The use of methyl acrylate (MA) as comonomer and PC as an external plasticizer renders the approach a combination of internal and external plasticization. Various mixtures of PAN and PC used in this work were examined by rheology, subjected to melt spinning, followed by discontinuous and continuous washing, respectively. The best fibers were derived from a PAN‐co‐PMA copolymer containing 8.1 mol‐% of MA having a number‐average molecular weight M _n of 34 000 g/mol, spun in the presence of 22.5 wt.‐% of PC. The resulting fibers were analyzed by scanning electron microscopy and wide‐angle X‐ray scattering (WAXS), and were subjected to mechanical testing.     

Diffusion Mechanism of As‐spun Polyacrylonitrile Fiber in a Dimethyl Sulfoxide‐Water Coagulation Bath

In this paper, the diffusion mechanism of as‐spun PAN fiber was investigated in dimethyl sulfoxide‐water by determining the dynamic compositions of the fibers and the diffusion coefficients of solvent and nonsolvent during coagulation. The diffusion process could be divided into two stages. Results showed that the first stage of the diffusion process was the most important during the whole process, which was fundamental to further study on the formation mechanism. Also, compared with wet spinning, the dry‐jet wet spinning method had the advantage of mild coagulating at a high jet‐stretch. At high concentrations, the diffusion coefficients increased and the ratio of solvent diffusion coefficient to nonsolvent diffusion coefficient decreased; an increasing temperature resulted in the increase of both diffusion coefficients with a decrease in their ratios. To some extent, for the PAN‐DMSO‐water system, the more the ratios D_s*/D_n* tended to 1, the more the cross‐section shapes of as‐spun PAN fiber tended to be circular.     

Rheological Behavior of Dope Solutions of Poly(acrylonitrile‐co‐itaconic acid) in N,N‐dimethylformamide: Effect of Polymer Molar Mass

The rheological behavior of dope solutions of poly(acrylonitrile‐co‐itaconic acid) or poly(AN‐co‐IA) is important from the point of view of deriving the spinning conditions for good quality special acrylic fibers. The viscosity of the resin dope is dictated by the polymer concentration, molar mass, temperature and shear force. The dynamic shear rheology of concentrated poly(AN‐co‐IA) polymer dope solutions in N, N‐dimethylformamide, in the molar mass (M¯_v) range of 1×10⁵ to 1×10⁶ g/mol, was investigated in the shear rate (γ′) range of 1×10¹ to 5×10⁴ min^?1. An empirical relation between η and M¯_v was found to exist at constant shear rate. The dope viscosity was dependent on the molar mass and the shear rate at a given temperature (T) and concentration. The polymer molar mass index of dope viscosity (m) was calculated as functions of concentration (c), shear rate and temperature. The m values increased with shear rate and temperature. A master equation relating m, with shear rate and temperature was derived for a given dope concentration. At higher shear rates, m tends to the value of 3.4, which is close to the molar mass index of viscosity reported for molten thermoplastics. m increased significantly with shear rate and nominally with temperature, while an increase in concentration decreased it. The onset of shear thinning of the dope shifted to a lower shear rate regime with an increase in polymer concentration and the molar mass. For a given value of molar mass, the increase in viscosity of the dope solution with polymer concentration was dependent on the shear rate.     

Studies on the Uptake of Rare Earth Elements on Polyacrylamidoxime Resins from Natural Concentrate Leachate Solutions

Synthesis of poly(acrylamidoxime) resin from polyacrylonitrile performed with different crosslinking ratios 2, 5, and 10 wt% of divinylbenzene as crosslinking agent, using methylbenzoate and dioctylphthalate as pore producing solvent, the reaction mixture occurred under nitrogen. Studies carried out on diluted solution from rare earth elements (REEs) concentrate contains impurities as Cu²⁺, Ni²⁺, Zn²⁺, Fe³⁺, Al³⁺, Si⁴⁺, Th⁴⁺, U⁶⁺, Ca²⁺, and K⁺. Changing some parameters as pH of the solution, time of feeding and type of acid as HCl, HNO₃, H₂SO₄. The adsorption efficiency of resin is in the order pH 6 > pH 5 > pH 4 > pH 2 with excluding pH 6 due to the precipitation of some of REEs with the impurities and complete precipitation of Dy ion during pH adjustment, the adsorption in HNO₃ > HCl > H₂SO₄ media.     

PVDF／PAN共混超滤膜

ＰＶＤＦ／ＰＡＮ共混超滤膜尹秀丽＊宋艳秋（天津纺织工学院材料科学系天津３００１６０）关键词聚偏氟乙烯，聚丙烯腈，共混，超滤膜１９９６－１１－２０收稿，１９９７－０５－０７修回共混是改变高分子材料性能的重要手段，已发现用聚合物共混的方法能制得性能优异的...     

交联聚丙烯腈螯合树脂对Pb(Ⅱ)的吸附及其在痕量分析中的应用

采用火焰原子吸收光谱法（FAAS）研究了交联聚丙烯腈螯合树脂对环境样品中Pb2+的吸附分离/富集行为,并考察了共存离子的干扰。 结果表明,该树脂对Pb2+的吸附率在溶液pH=5.4、静态吸附时间为1.5 h时室温下可达到90%。 在最佳吸附条件下,树脂对单一Pb2+的饱和吸附容量可达到49.6 mg/g。 以0.1 mol/L盐酸溶液作为解吸剂,可将吸附在树脂上的Pb2+定量洗脱,富集倍数和解吸率可分别达到50和97%。 富集50倍后,方法的检出限（3σ10）为5.3 μg/L;相对标准偏差（RSD）为2.1%;加标回收率为92.9%～97.6%。