Effect of surface condition on liquid crystal photoalignment by light-induced azo dye adsorption phenomena

The effect of surface condition on the photoalignment of light-induced methyl red (MR) adsorption phenomena on various substrates based on azo dye-doped liquid crystals is investigated. The results show that the polar surface energy determines the initiation of MR adsorption phenomena. The surface polarity energy of different substrates, which are modulated by oxygen plasma treatment (OPT), is further examined using the sessile drop method. The results also indicate that the uniformity and efficiency of MR adsorption can be enhanced by OPT. Light intensity influences the MR adsorption rate. The uniformity of MR adsorption onto various substrates is analysed via polarised optical microscopy.     

The inverse phase sequence SmA-SmC in symmetric dimeric liquid crystals

Seven homologous symmetric dimeric liquid crystals are presented where two three-ring mesogenic units are connected by a bis(carbonyloxy)alkylene spacer. For homologues with terminal heptyloxy, octyloxy and nonyloxy chains, the unusual phase sequence SmA-SmC with increasing temperature was detected by the study of the optical textures and by X-ray diffraction measurements. This unusual behaviour is discussed on the basis of the molecular structure of these compounds.     

Fast switching beam steering based on ferroelectric liquid crystal phase shutter and polarisation grating

We report on fast-switching and high-efficient optical beam steering based on a polymerisable liquid crystal polarisation grating (PG) in combination with ferroelectric liquid crystal (FLC) phase shutter. The PG was fabricated in a convenient single-step holographic exposure process using photo-sensitive azo-dye material as alignment layer for liquid crystal (LC) director. A binary electro-optical FLC was employed for circular polarisation selection, which enables the electro-tunable steering of the combined system. The efficiency of 95.7% with 82 μs switching time is obtained for 1064 nm laser. This work provides a versatile candidate for non-mechanical beam steering devices.     

一种新型偶氮染料在扭曲向列相液晶显示取向中的应用

研究了一种新型偶氮材料sy03在光控取向中的应用。将sy03加入聚酰亚胺SE-3310(Nissan)与N,N-二甲基甲酰胺(DMF)的混合溶液中作为90°扭曲向列相液晶显示(Twisted nematic liquid crystal display,TN-LCD)的光取向材料,测量由它作为取向膜的扭曲向列型盒的电光特性与仅用SE-3310取向的扭曲向列型盒电光特性比较,发现sy03偶氮的加入使得扭曲向列型盒的响应时间短到98 ms、阈值电压也降低到1.7 V左右。而且随曝光时间的增加,响应时间和衬比度都有所提高,电光响应曲线也更为陡峭。加热到150℃后,其电光特性并没有明显变化,证明了它良好的热稳定性。最后通过测量偏振紫外吸收光谱,分析得出液晶分子易取向方向与激发光源偏振方向垂直。     

Directing Polymorphism in the Helical Nanofilament Phase

Herein, it is reported that the polymorphism in the helical nanofilament (HNF, B₄) liquid-crystalline phase depends on the fabrication methods, that is, UV-driven formation and template-assisted self-assembly in the nanoconfined geometry. As a result, uniaxially oriented HNFs with different helical structures were obtained, in which generation of the twisted-ribbon and cylindrical-ribbon polymorphs showed that even the molecular lattice has a different orientation. The detailed structures were directly observed by SEM and grazing-incidence X-ray diffraction with synchrotron radiation. The resultant polymorphs could be used in chiro-optical applications due to the capability for fine control of the helical structures.     

A novel generation of photoactive comb‐shaped polyamides for the photoalignment of liquid crystals

A new approach to the synthesis of photoactive comb‐shaped homo‐ and copolyamides containing azobenzene, cinnamate, and coumarin side groups for photoalignment of liquid crystals was elaborated. Photooptical properties and photoorientational ability of these polymers with respect to liquid crystals were studied. It was shown that polarized UV irradiation of all spin‐coated polyamides leads to orientation of liquid crystalline molecules deposited on the polyamide thin films. The synthesized polymers containing cinnamate and coumarin side groups as well as azobenzene‐containing cyano‐ and nitro‐substituted polymers demonstrated good orientation ability in relation to liquid crystals displaying photoinduced planar orientation with high dichroism values within the range of 0.68–0.72. Contrary to the above‐mentioned polyamides, azobenzene‐containing fluorosubstituted polymers induced a homeotropic orientation of liquid crystals. It was shown that the synthesized photoactive polyamides can be considered as promising photoalignment materials for application in display technology, photonics, and other “smart” optical devices. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4031–4041     

Polyimide-free homogeneous photoalignment induced by polymerisable liquid crystal containing cinnamate moiety

We designed and synthesised a reactive mesogen (CRM) containing cinnamate moiety in the core and two acrylate groups at both ends. The structure was characterised by ¹H NMR and FT-IR, and its liquid crystalline property was investigated by DSC and POM. The compound showed a nematic phase between 175.2 – 97.5 ^oC, followed by a smectic C phase between 97.5 and 57.9 ^oC during the cooling cycle. We proposed a fabrication method to achieve uniaxial homogeneous alignment of liquid crystals by irradiating the CRM-doped LC mixture in a sandwich cell of in-plane switching mode (CRM-IPS) with linearly polarised ultraviolet light. The results indicated that the CRM-IPS cell showed excellent initial dark state with a good alignment state, electro-optical performance and durability. This confirmed that the photo-induced alignment of LCs by CRM possesses outstanding alignment capability compared to the conventional rubbed polyimide alignment layer. We expect that this fabrication method is a promising candidate for cost-effective, green-manufacturing, and high-quality alignment method for the manufacturing of high-resolution liquid crystal displays (LCDs).     

Light-induced LC director freezing on a chalcogenide surface

First observations of permanent light-induced director patterning in a transparent liquid crystal (LC) are reported. The patterning was observed in an LC cell with one of the substrates covered with a chalcogenide film. Concentric director ring pattern appears following the irradiation of the chalcogenide surface through the LC layer by a Gaussian beam. The experimental results are explained in terms of the heat transfer from the chalcogenide film to the LC after the light absorption by the chalcogenide film. Heating the LC changes its birefringence according to the spatial intensity distribution of the Gaussian beam. This in turn leads to the spatially oscillating changes of the polarisation state of light in the plane of the chalcogenide film. The oscillating changes of the light polarisation result in producing the light-induced easy orientation axis and the oscillating changes of the anchoring energy. It causes the spatial modulation of the director on the chalcogenide surface and the formation of the concentric ring twist structures in the cell.     

Linearly polarized ultraviolet photoreaction of photocrosslinkable polymers comprising the p-phenylenediacrylate group and photoalignment control of liquid crystals on the resultant film

We present (1) the linearly polarized (LP) ultraviolet (UV) photoreaction of block copolyesterethers comprising a hard segment of polyester and soft segment of poly(tetramethylene ether) (PTMG) and (2) the alignment behavior of liquid crystals (LCs) on the resultant photoreacted polymer films. Two kinds of copolyesterethers with different polyester segments of poly(hexamethylene p-phenylenediacrylate) (1a) or poly(hexamethylene p-phenylenediacrylate)-co-poly(hexamethylene 1,4-dibenzoate) (1b) were used in this study. The LP–UV irradiation resulted in a negative optical anisotropy for both polymer films, and a homogeneous photoalignment of LCs was achieved on the photoreacted polymer film. The LC alignment was perpendicular to the electric vector of the incident polarized light for 1a, whereas a reversion of the alignment from parallel to perpendicular was observed for 1b, depending on the irradiation doses. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4000–4006, 1999