绿色荧光粉YAGG∶Tb,Gd用于FED的尝试

FED器件的发展迫切需要具有化学和热稳定性 ,高亮度 ,长寿命的新型荧光材料。本文合成了Gd3 +离子共掺杂的YAGG∶Tb获得了YAGG∶Tb ,Gd ,并将其用于 0～ 30 0 0V低压范围 ,对其在不同电压和电流密度下的发光特性进行了测试。结果表明 ,该种材料特性优于ZnO∶Zn并且不存在电压与电流饱和     

Optical properties of a high-efficiency glass ceramic X-ray storage phosphor

The turbidity, photoluminescence, and photo-stimulated luminescence (PSL) of fluorozirconate glass containing barium chloride nano- and micro-crystals have been measured for samples prepared by isochronal (70 min) annealing over a temperature range of 220–283°C, and correlated with the microstructure as determined by X-ray diffraction measurements. Crystallization of hexagonal phase barium chloride commences at around 220°C, but until 275°C the material retains excellent transparency although it displays negligible PSL. Between 275°C and 277°C, the hexagonal phase converts to the orthorhombic phase, the transparency abruptly decreases, and the PSL rises to a value of around 13% of that found for the commercial storage phosphor BaFBr:Eu. For a slightly higher temperature of 280°C, new phases appear which correspond to the onset of bulk crystallization, and at 283°C the relative PSL rises to 33%, while the transparency falls further. The trade-off between optical transparency and PSL over this narrow temperature window for X-ray imaging plate applications is briefly discussed.     

New developments in X-ray storage phosphors

We found a significant PSL effect in Eu²⁺-doped fluorozirconate glasses (ZBLAN) which were additionally doped with Br⁻ or Cl⁻ ions. The PSL is attributed to the characteristic emission of Eu²⁺ present in nano-crystallites of BaBr₂ or BaCl₂, which form in the glass upon annealing. The metastable hexagonal form of BaX₂ (X=Br,Cl) is always formed first before it is converted into the stable orthorhombic form. The particle size increases upon annealing and so does the PSL efficiency of the glass ceramic. However, there is a saturation of the PSL efficiency, which is for Br⁻ doping about 9% and for Cl⁻-doping about 80% of the Eu-doped BaFBr standard. The particle size was determined by transmission electron microscopy (TEM). The TEM results show a clear tendency for bigger particles for longer annealing at the expense of its number. The particle size for the most efficient phosphor is about 100 nm.     

Y2O2S：Eu,Mg,Ti,Tb红色长时发光材料的研究

利用高温固相反应法合成了一种新型的红色长时发光材料－Y2O2S：Eu,Mg,Ti,Tb.材料的XRD测试结果表明Eu掺杂引起Y2O2S，Eu,Mg,Ti,Tb晶胞增大，激发光谱，发射光谱和发光衰减曲线表明该材料是一种适合紫外线和可见光激发，并具有很好的长时发光性能的红色长时发光材料，热释光谱测试结果表明该材料可能具有两个较深的陷阱能级，研究了Eu,Mg,Ti,Tb的加入量对材料发光特性的影响。结果表明：Eu,Mg,Ti,Tb影响材料的初始亮度和发光时间，Eu决定材料的红色比。     

X射线增感屏用纳米CaWO4的Pechini溶胶-凝胶法制备及其光学性能

采用Pechini溶胶-凝胶法制得纳米级CaWO4荧光粉,通过X射线衍射图、扫描电镜和发射光谱对其形貌和发光性能进行了研究,结果表明750℃条件下所得样品为纯相CaWO4晶体,在X射线激发下发射峰位于420nm,与感蓝胶片的光谱灵敏度匹配良好。其粒径在纳米量级且粒度分布集中是该方法所得CaWO4荧光粉的突出优点。将此荧光粉制成X射线增感屏并与市售同类产品相比,该增感屏可使感光片的成像质量显著提高。     

In2BP3O12:Cr3+宽带近红外荧光粉的发光性能及应用研究※

近红外光谱技术在安防监控、食品检测、生物成像、农业等领域具有重要应用价值, 而开发出紧凑高效的近红外光源是其大规模商业应用的前提. 荧光粉转换型近红外发光二极管(light emitting diodes, LED)光源具有结构紧凑、成本低、使用寿命长、发射光谱可调等优点, 因此近些年受到广泛关注, 其关键就在于开发出能被蓝光有效激发的高性能近红外荧光粉. 本工作利用高温固相法制备了一种新型宽带近红外荧光粉In₂BP₃O₁₂:Cr³⁺, 在480 nm激发下, 荧光粉发射峰值位于950 nm, 光谱覆盖了750~1350 nm范围, 半峰宽达到210 nm. 采用该荧光粉与商用蓝光InGaN LED芯片封装, 获得了具有宽带发射的近红外LED光源, 在60 mA的驱动电流下, 近红外光辐射功率为5 mW. 当采用该光源照射人的手掌, 用近红外电感耦合器(charge coupled device, CCD)相机能够对手掌中的血管进行清晰的成像. 上述结果表明该近红外荧光粉可用于制备基于蓝光芯片的宽带近红外LED光源, 并在生物医学等领域具有潜在应用前景.     

用于宽谱带发射白色发光二极管的黄色荧光粉Sr8MgAl(PO4)7∶xEu2+的制备及发光性能

通过高温固相反应合成了一系列宽谱带发射黄色荧光粉Sr_8MgAl(PO_4)_7∶x Eu~(2+)(SMAP∶x Eu~(2+)),并对其物质结构、发光性能及其在白色发光二极管(WLED)领域的应用进行了探究。X射线衍射(XRD)测试结果表明,SMAP∶x Eu~(2+)系列荧光粉具有单斜结构和C2/m空间群,激活剂Eu~(2+)离子能够很好地进入SMAP基质中并占据Sr~(2+)离子的晶格位点。漫反射光谱分析显示SMAP基质属于宽带隙材料,带隙宽度为3.60 e V。此外,SMAP∶x Eu~(2+)具有较宽的激发范围(280～500 nm),对应于Eu~(2+)离子的4f~7→4f~65d~1跃迁;在380 nm近紫外光激发下,呈现出450～800 nm的多发光中心的非对称黄光发射,发射峰位于590 nm处。基于高斯多峰拟合结果,得到3个发光中心,分别位于528、600和680 nm。最后,将已制备的黄色荧光粉SMAP∶0.05Eu~(2+)与商业化蓝粉Ba Mg Al_(10)O_(17)∶Eu~(2+)混合涂覆到400 nm芯片上制得色温较好(3 344 K)、显色指数较高(90.1)的WLED。     

A novel red-emitting phosphor Ca9Bi(PO4)7:Eu3+ for near ultraviolet white light-emitting diodes

Red phosphors Ca₉Bi_1-x(PO₄)₇:xEu³⁺ (x = 0.06, 0.10, 0.20, 0.30, 0.40, 0.50, 0.60, 0.70, 0.80 and 1.00) were synthesized by a conventional solid-state reaction (SSR) route. The X-ray diffraction patterns, photoluminescence spectra, ultraviolet–visible reflection spectroscopy, decay time and the International Commission on Illumination (CIE) chromaticity coordinates of these compounds were characterized and analyzed. The Eu-doped Ca₉Bi(PO₄)₇ phosphors exhibited strong red luminescence which peaks located at 615 nm due to the ⁵D₀→⁷F₂ electric dipole transition of Eu³⁺ ions after excitation at 393 nm. Ultraviolet–visible spectra indicated that the band-gap of Ca₉Bi_0.30(PO₄)₇:0.70Eu³⁺ is larger than that of Ca₉Bi(PO₄)₇. The results indicate that the phosphor Ca₉Bi_0.30(PO₄)₇:0.70Eu³⁺ can be a suitable red-emitting phosphor candidate for LEDs.     

高色纯度高热稳定性红色荧光粉Sr3La2Ge3O12:Sm^3+的合成及其性能

通过高温固相法合成了一系列Sr3La2-xGe3O12:xSm^3+(0≤x≤0.04)红色荧光粉,并对样品的形貌、元素组成、晶体结构、发光性能及热稳定性进行了探究。结果表明:样品Sr3La2Ge3O12:xSm^3+为较宽尺寸分布的颗粒,且结构中仅含有Sr、La、Ge、O、Sm等元素。样品Sr3La1.97Ge3O12:0.03Sm^3+的Rietveld结构精修图与实测XRD图完全吻合,具有六方晶系结构。漫反射测试结果显示基质Sr3La2Ge3O12的带宽为5.54 eV,属于宽带隙材料。在404 nm激发下,样品Sr3La2-xGe3O12:xSm^3+(0≤x≤0.04)的最大发射峰位于601nm处,属于Sm^3+的6H5/2→4L13/2能级跃迁。此外,样品Sr3La1.97Ge3O12:0.03Sm^3+的发光性能最佳,其CIE色坐标为(0.5321,0.4601),色纯度高达94.2%,在298-473 K范围内具有较好的热稳定性,测试温度达到423 K时发射强度仍为室温时的81.6%。